Commit 4a2a867f authored by Shaily Sangwan's avatar Shaily Sangwan Committed by Greg Kroah-Hartman

staging: rtl8712: fix block comments

This patch fixes the following checkpatch.pl warning:
Block comments use * on subsequent lines
Signed-off-by: default avatarShaily Sangwan <shaily15297@yahoo.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 12bc1d1e
......@@ -116,13 +116,13 @@ struct recv_buf {
};
/*
head ----->
data ----->
payload
tail ----->
end ----->
len = (unsigned int )(tail - data);
*/
* head ----->
* data ----->
* payload
* tail ----->
* end ----->
* len = (unsigned int )(tail - data);
*/
struct recv_frame_hdr {
struct list_head list;
_pkt *pkt;
......
......@@ -217,15 +217,15 @@ struct SetMacAddr_param {
};
/*
Caller Ad-Hoc/AP
Command -Rsp(AID == CAMID) mode
This is to force fw to add an sta_data entry per driver's request.
FW will write an cam entry associated with it.
*/
* Caller Ad-Hoc/AP
*
* Command -Rsp(AID == CAMID) mode
*
* This is to force fw to add an sta_data entry per driver's request.
*
* FW will write an cam entry associated with it.
*
*/
struct set_assocsta_parm {
u8 addr[ETH_ALEN];
};
......@@ -236,27 +236,27 @@ struct set_assocsta_rsp {
};
/*
Caller Ad-Hoc/AP
Command mode
This is to force fw to del an sta_data entry per driver's request
FW will invalidate the cam entry associated with it.
*/
* Caller Ad-Hoc/AP
*
* Command mode
*
* This is to force fw to del an sta_data entry per driver's request
*
* FW will invalidate the cam entry associated with it.
*
*/
struct del_assocsta_parm {
u8 addr[ETH_ALEN];
};
/*
Caller Mode: AP/Ad-HoC(M)
Notes: To notify fw that given staid has changed its power state
Command Mode
*/
* Caller Mode: AP/Ad-HoC(M)
*
* Notes: To notify fw that given staid has changed its power state
*
* Command Mode
*
*/
struct setstapwrstate_parm {
u8 staid;
u8 status;
......@@ -264,25 +264,25 @@ struct setstapwrstate_parm {
};
/*
Caller Mode: Any
Notes: To setup the basic rate of RTL8711
Command Mode
*/
* Caller Mode: Any
*
* Notes: To setup the basic rate of RTL8711
*
* Command Mode
*
*/
struct setbasicrate_parm {
u8 basicrates[NumRates];
};
/*
Caller Mode: Any
Notes: To read the current basic rate
Command-Rsp Mode
*/
* Caller Mode: Any
*
* Notes: To read the current basic rate
*
* Command-Rsp Mode
*
*/
struct getbasicrate_parm {
u32 rsvd;
};
......@@ -292,13 +292,13 @@ struct getbasicrate_rsp {
};
/*
Caller Mode: Any
Notes: To setup the data rate of RTL8711
Command Mode
*/
* Caller Mode: Any
*
* Notes: To setup the data rate of RTL8711
*
* Command Mode
*
*/
struct setdatarate_parm {
u8 mac_id;
u8 datarates[NumRates];
......@@ -334,13 +334,13 @@ struct SetChannelPlan_param {
};
/*
Caller Mode: Any
Notes: To read the current data rate
Command-Rsp Mode
*/
* Caller Mode: Any
*
* Notes: To read the current data rate
*
* Command-Rsp Mode
*
*/
struct getdatarate_parm {
u32 rsvd;
......@@ -351,36 +351,36 @@ struct getdatarate_rsp {
/*
Caller Mode: Any
AP: AP can use the info for the contents of beacon frame
Infra: STA can use the info when sitesurveying
Ad-HoC(M): Like AP
Ad-HoC(C): Like STA
Notes: To set the phy capability of the NIC
Command Mode
*/
* Caller Mode: Any
* AP: AP can use the info for the contents of beacon frame
* Infra: STA can use the info when sitesurveying
* Ad-HoC(M): Like AP
* Ad-HoC(C): Like STA
*
*
* Notes: To set the phy capability of the NIC
*
* Command Mode
*
*/
/*
Caller Mode: Any
Notes: To set the channel/modem/band
This command will be used when channel/modem/band is changed.
Command Mode
*/
* Caller Mode: Any
*
* Notes: To set the channel/modem/band
* This command will be used when channel/modem/band is changed.
*
* Command Mode
*
*/
/*
Caller Mode: Any
Notes: To get the current setting of channel/modem/band
Command-Rsp Mode
*/
* Caller Mode: Any
*
* Notes: To get the current setting of channel/modem/band
*
* Command-Rsp Mode
*
*/
struct getphy_rsp {
u8 rfchannel;
u8 modem;
......@@ -430,58 +430,58 @@ struct getrfintfs_parm {
};
/*
Notes: This command is used for H2C/C2H loopback testing
mac[0] == 0
==> CMD mode, return H2C_SUCCESS.
The following condition must be ture under CMD mode
mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
s2 == (b1 << 8 | b0);
mac[0] == 1
==> CMD_RSP mode, return H2C_SUCCESS_RSP
The rsp layout shall be:
rsp: parm:
mac[0] = mac[5];
mac[1] = mac[4];
mac[2] = mac[3];
mac[3] = mac[2];
mac[4] = mac[1];
mac[5] = mac[0];
s0 = s1;
s1 = swap16(s0);
w0 = swap32(w1);
b0 = b1
s2 = s0 + s1
b1 = b0
w1 = w0
mac[0] == 2
==> CMD_EVENT mode, return H2C_SUCCESS
The event layout shall be:
event: parm:
mac[0] = mac[5];
mac[1] = mac[4];
mac[2] = event's sequence number, starting from 1 to parm's marc[3]
mac[3] = mac[2];
mac[4] = mac[1];
mac[5] = mac[0];
s0 = swap16(s0) - event.mac[2];
s1 = s1 + event.mac[2];
w0 = swap32(w0);
b0 = b1
s2 = s0 + event.mac[2]
b1 = b0
w1 = swap32(w1) - event.mac[2];
parm->mac[3] is the total event counts that host requested.
event will be the same with the cmd's param.
*/
* Notes: This command is used for H2C/C2H loopback testing
*
* mac[0] == 0
* ==> CMD mode, return H2C_SUCCESS.
* The following condition must be ture under CMD mode
* mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
* s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
* s2 == (b1 << 8 | b0);
*
* mac[0] == 1
* ==> CMD_RSP mode, return H2C_SUCCESS_RSP
*
* The rsp layout shall be:
* rsp: parm:
* mac[0] = mac[5];
* mac[1] = mac[4];
* mac[2] = mac[3];
* mac[3] = mac[2];
* mac[4] = mac[1];
* mac[5] = mac[0];
* s0 = s1;
* s1 = swap16(s0);
* w0 = swap32(w1);
* b0 = b1
* s2 = s0 + s1
* b1 = b0
* w1 = w0
*
* mac[0] == 2
* ==> CMD_EVENT mode, return H2C_SUCCESS
* The event layout shall be:
* event: parm:
* mac[0] = mac[5];
* mac[1] = mac[4];
* mac[2] = event's sequence number, starting from 1 to parm's marc[3]
* mac[3] = mac[2];
* mac[4] = mac[1];
* mac[5] = mac[0];
* s0 = swap16(s0) - event.mac[2];
* s1 = s1 + event.mac[2];
* w0 = swap32(w0);
* b0 = b1
* s2 = s0 + event.mac[2]
* b1 = b0
* w1 = swap32(w1) - event.mac[2];
*
* parm->mac[3] is the total event counts that host requested.
*
*
* event will be the same with the cmd's param.
*
*/
/* CMD param Formart for DRV INTERNAL CMD HDL*/
struct drvint_cmd_parm {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment