Commit 4a2adca9 authored by Kim Phillips's avatar Kim Phillips Committed by Kumar Gala

[POWERPC] 83xx: Fix 2nd UCC entry in mpc832x_mds.dts

correct the reg property, remove duplicate io port entry, whitespace fixes.

Thanks to Peter Van Ackeren for pointing this out.
Signed-off-by: default avatarKim Phillips <kim.phillips@freescale.com>
Signed-off-by: default avatarKumar Gala <galak@kernel.crashing.org>
parent d8ecbb93
......@@ -104,7 +104,7 @@ ipic: pic@700 {
reg = <700 100>;
device_type = "ipic";
};
par_io@1400 {
reg = <1400 100>;
device_type = "par_io";
......@@ -117,7 +117,6 @@ pio3: ucc_pin@03 {
3 5 1 0 2 0 /* MDC */
0 d 2 0 1 0 /* RX_CLK (CLK9) */
3 18 2 0 1 0 /* TX_CLK (CLK10) */
1 1 1 0 1 0 /* TxD1 */
1 0 1 0 1 0 /* TxD0 */
1 1 1 0 1 0 /* TxD1 */
1 2 1 0 1 0 /* TxD2 */
......@@ -165,11 +164,11 @@ qe@e0100000 {
reg = <e0100000 480>;
brg-frequency = <0>;
bus-frequency = <BCD3D80>;
muram@10000 {
device_type = "muram";
ranges = <0 00010000 00004000>;
data-only@0 {
reg = <0 4000>;
};
......@@ -228,7 +227,7 @@ ucc@3200 {
compatible = "ucc_geth";
model = "UCC";
device-id = <4>;
reg = <3000 200>;
reg = <3200 200>;
interrupts = <23>;
interrupt-parent = < &qeic >;
/*
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment