Commit 4a5f7eff authored by Dong Aisheng's avatar Dong Aisheng Committed by Linus Walleij

pinctrl: pinctrl-imx6q: add missed mux function for USBOTG_ID

The original pin registers table is derived from u-boot mainline,
but somehow it was found missing some mux functions for USBOTG_ID.
We added it at the bottom by following the exist pin function ids,
then it will not break the exist using of pin function id in dts file.
Reported-by: default avatarRichard Zhao <richard.zhao@freescale.com>
Signed-off-by: default avatarDong Aisheng <dong.aisheng@linaro.org>
parent a6e7360b
...@@ -1626,3 +1626,5 @@ MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 1587 ...@@ -1626,3 +1626,5 @@ MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 1587
MX6Q_PAD_SD2_DAT3__GPIO_1_12 1588 MX6Q_PAD_SD2_DAT3__GPIO_1_12 1588
MX6Q_PAD_SD2_DAT3__SJC_DONE 1589 MX6Q_PAD_SD2_DAT3__SJC_DONE 1589
MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 1590 MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 1590
MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID 1591
MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID 1592
...@@ -1950,6 +1950,8 @@ static struct imx_pin_reg imx6q_pin_regs[] = { ...@@ -1950,6 +1950,8 @@ static struct imx_pin_reg imx6q_pin_regs[] = {
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 5, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__GPIO_1_12 */ IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 5, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__GPIO_1_12 */
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 6, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__SJC_DONE */ IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 6, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__SJC_DONE */
IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 7, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 */ IMX_PIN_REG(MX6Q_PAD_SD2_DAT3, 0x0744, 0x035C, 7, 0x0000, 0), /* MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 */
IMX_PIN_REG(MX6Q_PAD_ENET_RX_ER, 0x04EC, 0x01D8, 0, 0x0000, 0), /* MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID */
IMX_PIN_REG(MX6Q_PAD_GPIO_1, 0x05F4, 0x0224, 3, 0x0000, 0), /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */
}; };
/* Pad names for the pinmux subsystem */ /* Pad names for the pinmux subsystem */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment