drm/i915/skl: don't toggle PW1 and MISC power wells on-demand

With the DMC firmware installed we don't need to handle HW resources
that are handled automatically by the firmware. Besides being redundant
this can also interfere with the firmware, possibly getting it into a
broken/blocked state. The on-demand handling of PW1 was already half-way
removed, MISC IO was still handled in this way. After the last patch we
init/uninit these HW resources manually as part of the display core
init/uninit sequence, so we can now remove the on-demand handling for
these completely.

We still keep around the power wells (with no domains attached to them)
since the manual toggling during display core init/uninit happens via
the current API.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Patrik Jakobsson <patrik.jakobsson@linux.intel.com>
[s/beeing/being/ in commit message (imre)]
Link: http://patchwork.freedesktop.org/patch/msgid/1446657859-9598-7-git-send-email-imre.deak@intel.com

drivers/gpu/drm/i915/intel_runtime_pm.c

@@ -304,16 +304,6 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
 	BIT(POWER_DOMAIN_AUDIO) |			\
 	BIT(POWER_DOMAIN_VGA) |				\
 	BIT(POWER_DOMAIN_INIT))
-#define SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS (		\
-	SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS |		\
-	BIT(POWER_DOMAIN_PLLS) |			\
-	BIT(POWER_DOMAIN_PIPE_A) |			\
-	BIT(POWER_DOMAIN_TRANSCODER_EDP) |		\
-	BIT(POWER_DOMAIN_PIPE_A_PANEL_FITTER) |		\
-	BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) |		\
-	BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) |		\
-	BIT(POWER_DOMAIN_AUX_A) |			\
-	BIT(POWER_DOMAIN_INIT))
 #define SKL_DISPLAY_DDI_A_E_POWER_DOMAINS (		\
 	BIT(POWER_DOMAIN_PORT_DDI_A_2_LANES) |		\
 	BIT(POWER_DOMAIN_PORT_DDI_A_4_LANES) |		\
@@ -331,18 +321,13 @@ static void hsw_set_power_well(struct drm_i915_private *dev_priv,
 	BIT(POWER_DOMAIN_PORT_DDI_D_2_LANES) |		\
 	BIT(POWER_DOMAIN_PORT_DDI_D_4_LANES) |		\
 	BIT(POWER_DOMAIN_INIT))
-#define SKL_DISPLAY_MISC_IO_POWER_DOMAINS (		\
-	SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS |		\
-	BIT(POWER_DOMAIN_PLLS) |			\
-	BIT(POWER_DOMAIN_INIT))
 #define SKL_DISPLAY_ALWAYS_ON_POWER_DOMAINS (		\
-	(POWER_DOMAIN_MASK & ~(SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS |	\
+	(POWER_DOMAIN_MASK & ~(				\
 	SKL_DISPLAY_POWERWELL_2_POWER_DOMAINS |		\
 	SKL_DISPLAY_DDI_A_E_POWER_DOMAINS |		\
 	SKL_DISPLAY_DDI_B_POWER_DOMAINS |		\
 	SKL_DISPLAY_DDI_C_POWER_DOMAINS |		\
-	SKL_DISPLAY_DDI_D_POWER_DOMAINS |		\
-	SKL_DISPLAY_MISC_IO_POWER_DOMAINS)) |		\
+	SKL_DISPLAY_DDI_D_POWER_DOMAINS)) |		\
 	BIT(POWER_DOMAIN_INIT))
 
 #define BXT_DISPLAY_POWERWELL_2_POWER_DOMAINS (		\
@@ -661,14 +646,9 @@ static void skl_set_power_well(struct drm_i915_private *dev_priv,
 		}
 	} else {
 		if (enable_requested) {
-			if (IS_SKYLAKE(dev) &&
-				(power_well->data == SKL_DISP_PW_1))
-				DRM_DEBUG_KMS("Not Disabling PW1, dmc will handle\n");
-			else {
-				I915_WRITE(HSW_PWR_WELL_DRIVER,	tmp & ~req_mask);
-				POSTING_READ(HSW_PWR_WELL_DRIVER);
-				DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
-			}
+			I915_WRITE(HSW_PWR_WELL_DRIVER,	tmp & ~req_mask);
+			POSTING_READ(HSW_PWR_WELL_DRIVER);
+			DRM_DEBUG_KMS("Disabling %s\n", power_well->name);
 
 			if (GEN9_ENABLE_DC5(dev) &&
 				power_well->data == SKL_DISP_PW_2)
@@ -1740,13 +1720,15 @@ static struct i915_power_well skl_power_wells[] = {
 	},
 	{
 		.name = "power well 1",
-		.domains = SKL_DISPLAY_POWERWELL_1_POWER_DOMAINS,
+		/* Handled by the DMC firmware */
+		.domains = 0,
 		.ops = &skl_power_well_ops,
 		.data = SKL_DISP_PW_1,
 	},
 	{
 		.name = "MISC IO power well",
-		.domains = SKL_DISPLAY_MISC_IO_POWER_DOMAINS,
+		/* Handled by the DMC firmware */
+		.domains = 0,
 		.ops = &skl_power_well_ops,
 		.data = SKL_DISP_PW_MISC_IO,
 	},