Skip to content

L
linux
Commit 4a8fda69 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

fbdev: omapfb: remove unused board support 

A number of omap1 based board files got removed, so the corresponding
framebuffer drivers are no longer used. The remaining ones are for
ams_delta, osk and palmTE, which are still part of the mainline kernel.

Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Cc: linux-omap@vger.kernel.org
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Angelo Arrifano <miknix@gmail.com>
Cc: Imre Deak <imre.deak@intel.com>
Acked-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent ab5043ef
Hide whitespace changes
Inline Side-by-side
Showing with 0 additions and 448 deletions
drivers/video/fbdev/omap/Kconfig
View file @ 4a8fda69
......@@ -40,15 +40,6 @@ config FB_OMAP_LCD_MIPID
the Mobile Industry Processor Interface DBI-C/DCS
specification. (Supported LCDs: Philips LPH8923, Sharp LS041Y3)
config FB_OMAP_LCD_H3
bool "TPS65010 LCD controller on OMAP-H3"
depends on MACH_OMAP_H3 || COMPILE_TEST
depends on TPS65010=y
default y
help
Say Y here if you want to have support for the LCD on the
H3 board.
config FB_OMAP_DMA_TUNE
bool "Set DMA SDRAM access priority high"
depends on FB_OMAP
......
drivers/video/fbdev/omap/Makefile
View file @ 4a8fda69
......@@ -17,16 +17,10 @@ objs-y$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
lcds-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
lcds-y$(CONFIG_FB_OMAP_LCD_H3) += lcd_h3.o
lcds-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o
lcds-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o
lcds-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
lcds-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
lcds-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
lcds-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
lcds-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
lcds-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
omapfb-objs := $(objs-yy)
......
drivers/video/fbdev/omap/lcd_h3.c deleted 100644 → 0
View file @ ab5043ef
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* LCD panel support for the TI OMAP H3 board
*
* Copyright (C) 2004 Nokia Corporation
* Author: Imre Deak <imre.deak@nokia.com>
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/mfd/tps65010.h>
#include <linux/gpio.h>
#include "omapfb.h"
#define MODULE_NAME "omapfb-lcd_h3"
static int h3_panel_enable(struct lcd_panel *panel)
{
int r = 0;
/* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */
r = tps65010_set_gpio_out_value(GPIO1, HIGH);
if (!r)
r = tps65010_set_gpio_out_value(GPIO2, HIGH);
if (r)
pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
return r;
}
static void h3_panel_disable(struct lcd_panel *panel)
{
int r = 0;
/* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */
r = tps65010_set_gpio_out_value(GPIO1, LOW);
if (!r)
tps65010_set_gpio_out_value(GPIO2, LOW);
if (r)
pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
}
static struct lcd_panel h3_panel = {
.name = "h3",
.config = OMAP_LCDC_PANEL_TFT,
.data_lines = 16,
.bpp = 16,
.x_res = 240,
.y_res = 320,
.pixel_clock = 12000,
.hsw = 12,
.hfp = 14,
.hbp = 72 - 12,
.vsw = 1,
.vfp = 1,
.vbp = 0,
.pcd = 0,
.enable = h3_panel_enable,
.disable = h3_panel_disable,
};
static int h3_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&h3_panel);
return 0;
}
static struct platform_driver h3_panel_driver = {
.probe = h3_panel_probe,
.driver = {
.name = "lcd_h3",
},
};
module_platform_driver(h3_panel_driver);
MODULE_AUTHOR("Imre Deak");
MODULE_DESCRIPTION("LCD panel support for the TI OMAP H3 board");
MODULE_LICENSE("GPL");
drivers/video/fbdev/omap/lcd_htcherald.c deleted 100644 → 0
View file @ ab5043ef
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* File: drivers/video/omap/lcd-htcherald.c
*
* LCD panel support for the HTC Herald
*
* Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
* Copyright (C) 2009 Wing Linux
*
* Based on the lcd_htcwizard.c file from the linwizard project:
* Copyright (C) linwizard.sourceforge.net
* Author: Angelo Arrifano <miknix@gmail.com>
* Based on lcd_h4 by Imre Deak <imre.deak@nokia.com>
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include "omapfb.h"
/* Found on WIZ200 (miknix) and some HERA110 models (darkstar62) */
static struct lcd_panel htcherald_panel_1 = {
.name = "lcd_herald",
.config = OMAP_LCDC_PANEL_TFT |
OMAP_LCDC_INV_HSYNC |
OMAP_LCDC_INV_VSYNC |
OMAP_LCDC_INV_PIX_CLOCK,
.bpp = 16,
.data_lines = 16,
.x_res = 240,
.y_res = 320,
.pixel_clock = 6093,
.pcd = 0, /* 15 */
.hsw = 10,
.hfp = 10,
.hbp = 20,
.vsw = 3,
.vfp = 2,
.vbp = 2,
};
static int htcherald_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&htcherald_panel_1);
return 0;
}
static struct platform_driver htcherald_panel_driver = {
.probe = htcherald_panel_probe,
.driver = {
.name = "lcd_htcherald",
},
};
module_platform_driver(htcherald_panel_driver);
MODULE_AUTHOR("Cory Maccarrone");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("LCD panel support for the HTC Herald");
drivers/video/fbdev/omap/lcd_inn1510.c deleted 100644 → 0
View file @ ab5043ef
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* LCD panel support for the TI OMAP1510 Innovator board
*
* Copyright (C) 2004 Nokia Corporation
* Author: Imre Deak <imre.deak@nokia.com>
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/soc/ti/omap1-soc.h>
#include "omapfb.h"
static void __iomem *omap1510_fpga_lcd_panel_control;
static int innovator1510_panel_enable(struct lcd_panel *panel)
{
__raw_writeb(0x7, omap1510_fpga_lcd_panel_control);
return 0;
}
static void innovator1510_panel_disable(struct lcd_panel *panel)
{
__raw_writeb(0x0, omap1510_fpga_lcd_panel_control);
}
static struct lcd_panel innovator1510_panel = {
.name = "inn1510",
.config = OMAP_LCDC_PANEL_TFT,
.bpp = 16,
.data_lines = 16,
.x_res = 240,
.y_res = 320,
.pixel_clock = 12500,
.hsw = 40,
.hfp = 40,
.hbp = 72,
.vsw = 1,
.vfp = 1,
.vbp = 0,
.pcd = 12,
.enable = innovator1510_panel_enable,
.disable = innovator1510_panel_disable,
};
static int innovator1510_panel_probe(struct platform_device *pdev)
{
omap1510_fpga_lcd_panel_control = (void __iomem *)pdev->dev.platform_data;
omapfb_register_panel(&innovator1510_panel);
return 0;
}
static struct platform_driver innovator1510_panel_driver = {
.probe = innovator1510_panel_probe,
.driver = {
.name = "lcd_inn1510",
},
};
module_platform_driver(innovator1510_panel_driver);
MODULE_AUTHOR("Imre Deak");
MODULE_DESCRIPTION("LCD panel support for the TI OMAP1510 Innovator board");
MODULE_LICENSE("GPL");
drivers/video/fbdev/omap/lcd_inn1610.c deleted 100644 → 0
View file @ ab5043ef
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* LCD panel support for the TI OMAP1610 Innovator board
*
* Copyright (C) 2004 Nokia Corporation
* Author: Imre Deak <imre.deak@nokia.com>
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include "omapfb.h"
#define MODULE_NAME "omapfb-lcd_h3"
static int innovator1610_panel_init(struct lcd_panel *panel,
struct omapfb_device *fbdev)
{
int r = 0;
/* configure GPIO(14, 15) as outputs */
if (gpio_request_one(14, GPIOF_OUT_INIT_LOW, "lcd_en0")) {
pr_err(MODULE_NAME ": can't request GPIO 14\n");
r = -1;
goto exit;
}
if (gpio_request_one(15, GPIOF_OUT_INIT_LOW, "lcd_en1")) {
pr_err(MODULE_NAME ": can't request GPIO 15\n");
gpio_free(14);
r = -1;
goto exit;
}
exit:
return r;
}
static void innovator1610_panel_cleanup(struct lcd_panel *panel)
{
gpio_free(15);
gpio_free(14);
}
static int innovator1610_panel_enable(struct lcd_panel *panel)
{
/* set GPIO14 and GPIO15 high */
gpio_set_value(14, 1);
gpio_set_value(15, 1);
return 0;
}
static void innovator1610_panel_disable(struct lcd_panel *panel)
{
/* set GPIO13, GPIO14 and GPIO15 low */
gpio_set_value(14, 0);
gpio_set_value(15, 0);
}
static struct lcd_panel innovator1610_panel = {
.name = "inn1610",
.config = OMAP_LCDC_PANEL_TFT,
.bpp = 16,
.data_lines = 16,
.x_res = 320,
.y_res = 240,
.pixel_clock = 12500,
.hsw = 40,
.hfp = 40,
.hbp = 72,
.vsw = 1,
.vfp = 1,
.vbp = 0,
.pcd = 12,
.init = innovator1610_panel_init,
.cleanup = innovator1610_panel_cleanup,
.enable = innovator1610_panel_enable,
.disable = innovator1610_panel_disable,
};
static int innovator1610_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&innovator1610_panel);
return 0;
}
static struct platform_driver innovator1610_panel_driver = {
.probe = innovator1610_panel_probe,
.driver = {
.name = "lcd_inn1610",
},
};
module_platform_driver(innovator1610_panel_driver);
MODULE_AUTHOR("Imre Deak");
MODULE_DESCRIPTION("LCD panel support for the TI OMAP1610 Innovator board");
MODULE_LICENSE("GPL");
drivers/video/fbdev/omap/lcd_palmtt.c deleted 100644 → 0
View file @ ab5043ef
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* LCD panel support for Palm Tungsten|T
* Current version : Marek Vasut <marek.vasut@gmail.com>
*
* Modified from lcd_inn1510.c
*/
/*
GPIO11 - backlight
GPIO12 - screen blanking
GPIO13 - screen blanking
*/
#include <linux/platform_device.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/gpio.h>
#include "omapfb.h"
static unsigned long palmtt_panel_get_caps(struct lcd_panel *panel)
{
return OMAPFB_CAPS_SET_BACKLIGHT;
}
static struct lcd_panel palmtt_panel = {
.name = "palmtt",
.config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE |
OMAP_LCDC_HSVS_OPPOSITE,
.bpp = 16,
.data_lines = 16,
.x_res = 320,
.y_res = 320,
.pixel_clock = 10000,
.hsw = 4,
.hfp = 8,
.hbp = 28,
.vsw = 1,
.vfp = 8,
.vbp = 7,
.pcd = 0,
.get_caps = palmtt_panel_get_caps,
};
static int palmtt_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&palmtt_panel);
return 0;
}
static struct platform_driver palmtt_panel_driver = {
.probe = palmtt_panel_probe,
.driver = {
.name = "lcd_palmtt",
},
};
module_platform_driver(palmtt_panel_driver);
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
MODULE_DESCRIPTION("LCD panel support for Palm Tungsten|T");
MODULE_LICENSE("GPL");
drivers/video/fbdev/omap/lcd_palmz71.c deleted 100644 → 0
View file @ ab5043ef
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* LCD panel support for the Palm Zire71
*
* Original version : Romain Goyet
* Current version : Laurent Gonzalez
* Modified for zire71 : Marek Vasut
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include "omapfb.h"
static unsigned long palmz71_panel_get_caps(struct lcd_panel *panel)
{
return OMAPFB_CAPS_SET_BACKLIGHT;
}
static struct lcd_panel palmz71_panel = {
.name = "palmz71",
.config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE |
OMAP_LCDC_HSVS_OPPOSITE,
.data_lines = 16,
.bpp = 16,
.pixel_clock = 24000,
.x_res = 320,
.y_res = 320,
.hsw = 4,
.hfp = 8,
.hbp = 28,
.vsw = 1,
.vfp = 8,
.vbp = 7,
.pcd = 0,
.get_caps = palmz71_panel_get_caps,
};
static int palmz71_panel_probe(struct platform_device *pdev)
{
omapfb_register_panel(&palmz71_panel);
return 0;
}
static struct platform_driver palmz71_panel_driver = {
.probe = palmz71_panel_probe,
.driver = {
.name = "lcd_palmz71",
},
};
module_platform_driver(palmz71_panel_driver);
MODULE_AUTHOR("Romain Goyet, Laurent Gonzalez, Marek Vasut");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("LCD panel support for the Palm Zire71");
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7