Merge tag 'mmc-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fixup VDD/VMMC voltage-range negotiation

  MMC host:
   - sdhci-pci: Fix memory leak by adding a missing pci_dev_put()
   - sdhci-pci-o2micro: Fix card detect by tuning the debounce timeout"

* tag 'mmc-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-pci: Fix possible memory leak caused by missing pci_dev_put()
  mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout
  mmc: core: properly select voltage range without power cycle

drivers/mmc/core/core.c

@@ -1134,7 +1134,13 @@ u32 mmc_select_voltage(struct mmc_host *host, u32 ocr)
 		mmc_power_cycle(host, ocr);
 	} else {
 		bit = fls(ocr) - 1;
-		ocr &= 3 << bit;
+		/*
+		 * The bit variable represents the highest voltage bit set in
+		 * the OCR register.
+		 * To keep a range of 2 values (e.g. 3.2V/3.3V and 3.3V/3.4V),
+		 * we must shift the mask '3' with (bit - 1).
+		 */
+		ocr &= 3 << (bit - 1);
 		if (bit != host->ios.vdd)
 			dev_warn(mmc_dev(host), "exceeding card's volts\n");
 	}

drivers/mmc/host/sdhci-pci-core.c

@@ -1749,6 +1749,8 @@ static int amd_probe(struct sdhci_pci_chip *chip)
 		}
 	}
 
+	pci_dev_put(smbus_dev);
+
 	if (gen == AMD_CHIPSET_BEFORE_ML || gen == AMD_CHIPSET_CZ)
 		chip->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD;
 

drivers/mmc/host/sdhci-pci-o2micro.c

@@ -32,6 +32,7 @@
 #define O2_SD_CAPS		0xE0
 #define O2_SD_ADMA1		0xE2
 #define O2_SD_ADMA2		0xE7
+#define O2_SD_MISC_CTRL2	0xF0
 #define O2_SD_INF_MOD		0xF1
 #define O2_SD_MISC_CTRL4	0xFC
 #define O2_SD_MISC_CTRL		0x1C0
@@ -877,6 +878,12 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
 		/* Set Tuning Windows to 5 */
 		pci_write_config_byte(chip->pdev,
 				O2_SD_TUNING_CTRL, 0x55);
+		//Adjust 1st and 2nd CD debounce time
+		pci_read_config_dword(chip->pdev, O2_SD_MISC_CTRL2, &scratch_32);
+		scratch_32 &= 0xFFE7FFFF;
+		scratch_32 |= 0x00180000;
+		pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL2, scratch_32);
+		pci_write_config_dword(chip->pdev, O2_SD_DETECT_SETTING, 1);
 		/* Lock WP */
 		ret = pci_read_config_byte(chip->pdev,
 					   O2_SD_LOCK_WP, &scratch);