[PATCH] m68knommu: remove unused include/asm-m68knommu/nap.h

Remove unused header file from include/asm-m68knommu.
Signed-off-by: Greg Ungerer <gerg@snapgear.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

include/asm-m68knommu/nap.h

-/****************************************************************************/
-
-/*
- *	nap.h -- Marconi/NAP support.
- *
- * 	(C) Copyright 2001, SnapGear (www.snapgear.com) 
- */
-
-/****************************************************************************/
-#ifndef	nap_h
-#define	nap_h
-/****************************************************************************/
-
-#include <linux/config.h>
-
-/****************************************************************************/
-#ifdef CONFIG_MARCONINAP
-/****************************************************************************/
-
-#ifdef CONFIG_COLDFIRE
-#include <asm/coldfire.h>
-#include <asm/mcfsim.h>
-#endif
-
-/*
- *	Command to support selecting RS232 or RS422 mode on the
- *	second COM port.
- */
-#define	TIOCSET422	0x4d01		/* Set port mode 232 or 422 */
-#define	TIOCGET422	0x4d02		/* Get current port mode */
-
-/*
- *	Low level control of the RS232/422 enable.
- */
-#define	MCFPP_PA11	0x0800
-
-#ifndef __ASSEMBLY__
-/*
- *	RS232/422 control is via the single PA11 line. Low is the RS422
- *	enable, high is RS232 mode.
- */
-static __inline__ unsigned int mcf_getpa(void)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
-	return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setpa(unsigned int mask, unsigned int bits)
-{
-	volatile unsigned short *pp;
-	unsigned long		flags;
-
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT);
-	save_flags(flags); cli();
-	*pp = (*pp & ~mask) | bits;
-	restore_flags(flags);
-}
-#endif /* __ASSEMBLY__ */
-
-/****************************************************************************/
-
-#if defined(CONFIG_M5272)
-/*
- *	Marconi/NAP based hardware. DTR/DCD lines are wired to GPB lines.
- */
-#define	MCFPP_DCD0	0x0080
-#define	MCFPP_DCD1	0x0020
-#define	MCFPP_DTR0	0x0040
-#define	MCFPP_DTR1	0x0010
-
-#ifndef __ASSEMBLY__
-/*
- *	These functions defined to give quasi generic access to the
- *	PPIO bits used for DTR/DCD.
- */
-static __inline__ unsigned int mcf_getppdata(void)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
-	return((unsigned int) *pp);
-}
-
-static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits)
-{
-	volatile unsigned short *pp;
-	pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT);
-	*pp = (*pp & ~mask) | bits;
-}
-#endif /* __ASSEMBLY__ */
-#endif /* CONFIG_M5272 */
-
-/****************************************************************************/
-#endif /* CONFIG_MARCONINAP */
-/****************************************************************************/
-#endif	/* nap_h */