mwifiex: recover from skb allocation failures during RX

This patch adds recovery mechanism for SDIO RX during SKB allocation
failures.
For allocation failures during multiport aggregation, we skip and drop RX
packets.
For single port read case, we will use preallocated card->mpa_rx.buf to
complete cmd53 read.
Now we terminate SDIO operations only upon cmd53 failures.

CC: James Cameron <quozl@laptop.org>
Signed-off-by: Zhaoyang Liu <liuzy@marvell.com>
Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

drivers/net/wireless/mwifiex/sdio.c

@@ -1317,10 +1317,14 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
 			skb_deaggr = mwifiex_alloc_dma_align_buf(len_arr[pind],
 								 GFP_KERNEL |
 								 GFP_DMA);
-			if (!skb_deaggr)
-				goto error;
+			if (!skb_deaggr) {
+				dev_err(adapter->dev, "skb allocation failure drop pkt len=%d type=%d\n",
+					pkt_len, pkt_type);
+				curr_ptr += len_arr[pind];
+				continue;
+			}
+
 			skb_put(skb_deaggr, len_arr[pind]);
-			card->mpa_rx.skb_arr[pind] = skb_deaggr;
 
 			if ((pkt_type == MWIFIEX_TYPE_DATA ||
 			     (pkt_type == MWIFIEX_TYPE_AGGR_DATA &&
@@ -1335,7 +1339,7 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
 				mwifiex_decode_rx_packet(adapter, skb_deaggr,
 							 pkt_type);
 			} else {
-				dev_err(adapter->dev, "wrong aggr pkt:\t"
+				dev_err(adapter->dev, " drop wrong aggr pkt:\t"
 					"sdio_single_port_rx_aggr=%d\t"
 					"type=%d len=%d max_len=%d\n",
 					adapter->sdio_rx_aggr_enable,
@@ -1352,9 +1356,18 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
 	if (f_do_rx_cur) {
 		dev_dbg(adapter->dev, "info: RX: port: %d, rx_len: %d\n",
 			port, rx_len);
+
 		skb = mwifiex_alloc_dma_align_buf(rx_len, GFP_KERNEL | GFP_DMA);
-		if (!skb)
-			goto error;
+		if (!skb) {
+			dev_err(adapter->dev, "single skb allocated fail,\t"
+				"drop pkt port=%d len=%d\n", port, rx_len);
+			if (mwifiex_sdio_card_to_host(adapter, &pkt_type,
+						      card->mpa_rx.buf, rx_len,
+						      adapter->ioport + port))
+				goto error;
+			return 0;
+		}
+
 		skb_put(skb, rx_len);
 
 		if (mwifiex_sdio_card_to_host(adapter, &pkt_type,
@@ -1363,10 +1376,11 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
 			goto error;
 		if (!adapter->sdio_rx_aggr_enable &&
 		    pkt_type == MWIFIEX_TYPE_AGGR_DATA) {
-			dev_err(adapter->dev, "Wrong pkt type %d\t"
-				"Current SDIO RX Aggr not enabled\n",
+			dev_err(adapter->dev, "drop wrong pkt type %d\t"
+				"current SDIO RX Aggr not enabled\n",
 				pkt_type);
-			goto error;
+			dev_kfree_skb_any(skb);
+			return 0;
 		}
 
 		mwifiex_decode_rx_packet(adapter, skb, pkt_type);
@@ -1379,16 +1393,8 @@ static int mwifiex_sdio_card_to_host_mp_aggr(struct mwifiex_adapter *adapter,
 
 	return 0;
 error:
-	if (MP_RX_AGGR_IN_PROGRESS(card)) {
-		/* Multiport-aggregation transfer failed - cleanup */
-		for (pind = 0; pind < card->mpa_rx.pkt_cnt; pind++) {
-			/* copy pkt to deaggr buf */
-			skb_deaggr = card->mpa_rx.skb_arr[pind];
-			if (skb_deaggr)
-				dev_kfree_skb_any(skb_deaggr);
-		}
+	if (MP_RX_AGGR_IN_PROGRESS(card))
 		MP_RX_AGGR_BUF_RESET(card);
-	}
 
 	if (f_do_rx_cur && skb)
 		/* Single transfer pending. Free curr buff also */