drm/bridge: ti-sn65dsi83: Fix delay after reset deassert to match spec

The datasheet specifies a delay of 10 milliseconds, but the current
driver only waits for 1 ms. Fix this to make sure the initialization
sequence meets the spec.

Fixes: ceb515ba ("drm/bridge: ti-sn65dsi83: Add TI SN65DSI83 and SN65DSI84 driver")
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221122081219.20143-1-frieder@fris.de

drivers/gpu/drm/bridge/ti-sn65dsi83.c

@@ -346,7 +346,7 @@ static void sn65dsi83_atomic_enable(struct drm_bridge *bridge,
 
 	/* Deassert reset */
 	gpiod_set_value_cansleep(ctx->enable_gpio, 1);
-	usleep_range(1000, 1100);
+	usleep_range(10000, 11000);
 
 	/* Get the LVDS format from the bridge state. */
 	bridge_state = drm_atomic_get_new_bridge_state(state, bridge);