Commit 4b11cb7f authored by Paul Cercueil's avatar Paul Cercueil

drm/ingenic: Move register definitions to ingenic-drm.h

Move the register definitions to ingenic-drm.h, to keep
ingenic-drm-drv.c tidy.

v2: Fix SPDX license tag
v3: No change
Signed-off-by: default avatarPaul Cercueil <paul@crapouillou.net>
Reviewed-by: default avatarSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20200716163846.174790-7-paul@crapouillou.net
parent e5507d2c
......@@ -4,6 +4,8 @@
//
// Copyright (C) 2019, Paul Cercueil <paul@crapouillou.net>
#include "ingenic-drm.h"
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/module.h>
......@@ -32,120 +34,6 @@
#include <drm/drm_simple_kms_helper.h>
#include <drm/drm_vblank.h>
#define JZ_REG_LCD_CFG 0x00
#define JZ_REG_LCD_VSYNC 0x04
#define JZ_REG_LCD_HSYNC 0x08
#define JZ_REG_LCD_VAT 0x0C
#define JZ_REG_LCD_DAH 0x10
#define JZ_REG_LCD_DAV 0x14
#define JZ_REG_LCD_PS 0x18
#define JZ_REG_LCD_CLS 0x1C
#define JZ_REG_LCD_SPL 0x20
#define JZ_REG_LCD_REV 0x24
#define JZ_REG_LCD_CTRL 0x30
#define JZ_REG_LCD_STATE 0x34
#define JZ_REG_LCD_IID 0x38
#define JZ_REG_LCD_DA0 0x40
#define JZ_REG_LCD_SA0 0x44
#define JZ_REG_LCD_FID0 0x48
#define JZ_REG_LCD_CMD0 0x4C
#define JZ_REG_LCD_DA1 0x50
#define JZ_REG_LCD_SA1 0x54
#define JZ_REG_LCD_FID1 0x58
#define JZ_REG_LCD_CMD1 0x5C
#define JZ_LCD_CFG_SLCD BIT(31)
#define JZ_LCD_CFG_PS_DISABLE BIT(23)
#define JZ_LCD_CFG_CLS_DISABLE BIT(22)
#define JZ_LCD_CFG_SPL_DISABLE BIT(21)
#define JZ_LCD_CFG_REV_DISABLE BIT(20)
#define JZ_LCD_CFG_HSYNCM BIT(19)
#define JZ_LCD_CFG_PCLKM BIT(18)
#define JZ_LCD_CFG_INV BIT(17)
#define JZ_LCD_CFG_SYNC_DIR BIT(16)
#define JZ_LCD_CFG_PS_POLARITY BIT(15)
#define JZ_LCD_CFG_CLS_POLARITY BIT(14)
#define JZ_LCD_CFG_SPL_POLARITY BIT(13)
#define JZ_LCD_CFG_REV_POLARITY BIT(12)
#define JZ_LCD_CFG_HSYNC_ACTIVE_LOW BIT(11)
#define JZ_LCD_CFG_PCLK_FALLING_EDGE BIT(10)
#define JZ_LCD_CFG_DE_ACTIVE_LOW BIT(9)
#define JZ_LCD_CFG_VSYNC_ACTIVE_LOW BIT(8)
#define JZ_LCD_CFG_18_BIT BIT(7)
#define JZ_LCD_CFG_PDW (BIT(5) | BIT(4))
#define JZ_LCD_CFG_MODE_GENERIC_16BIT 0
#define JZ_LCD_CFG_MODE_GENERIC_18BIT BIT(7)
#define JZ_LCD_CFG_MODE_GENERIC_24BIT BIT(6)
#define JZ_LCD_CFG_MODE_SPECIAL_TFT_1 1
#define JZ_LCD_CFG_MODE_SPECIAL_TFT_2 2
#define JZ_LCD_CFG_MODE_SPECIAL_TFT_3 3
#define JZ_LCD_CFG_MODE_TV_OUT_P 4
#define JZ_LCD_CFG_MODE_TV_OUT_I 6
#define JZ_LCD_CFG_MODE_SINGLE_COLOR_STN 8
#define JZ_LCD_CFG_MODE_SINGLE_MONOCHROME_STN 9
#define JZ_LCD_CFG_MODE_DUAL_COLOR_STN 10
#define JZ_LCD_CFG_MODE_DUAL_MONOCHROME_STN 11
#define JZ_LCD_CFG_MODE_8BIT_SERIAL 12
#define JZ_LCD_CFG_MODE_LCM 13
#define JZ_LCD_VSYNC_VPS_OFFSET 16
#define JZ_LCD_VSYNC_VPE_OFFSET 0
#define JZ_LCD_HSYNC_HPS_OFFSET 16
#define JZ_LCD_HSYNC_HPE_OFFSET 0
#define JZ_LCD_VAT_HT_OFFSET 16
#define JZ_LCD_VAT_VT_OFFSET 0
#define JZ_LCD_DAH_HDS_OFFSET 16
#define JZ_LCD_DAH_HDE_OFFSET 0
#define JZ_LCD_DAV_VDS_OFFSET 16
#define JZ_LCD_DAV_VDE_OFFSET 0
#define JZ_LCD_CTRL_BURST_4 (0x0 << 28)
#define JZ_LCD_CTRL_BURST_8 (0x1 << 28)
#define JZ_LCD_CTRL_BURST_16 (0x2 << 28)
#define JZ_LCD_CTRL_RGB555 BIT(27)
#define JZ_LCD_CTRL_OFUP BIT(26)
#define JZ_LCD_CTRL_FRC_GRAYSCALE_16 (0x0 << 24)
#define JZ_LCD_CTRL_FRC_GRAYSCALE_4 (0x1 << 24)
#define JZ_LCD_CTRL_FRC_GRAYSCALE_2 (0x2 << 24)
#define JZ_LCD_CTRL_PDD_MASK (0xff << 16)
#define JZ_LCD_CTRL_EOF_IRQ BIT(13)
#define JZ_LCD_CTRL_SOF_IRQ BIT(12)
#define JZ_LCD_CTRL_OFU_IRQ BIT(11)
#define JZ_LCD_CTRL_IFU0_IRQ BIT(10)
#define JZ_LCD_CTRL_IFU1_IRQ BIT(9)
#define JZ_LCD_CTRL_DD_IRQ BIT(8)
#define JZ_LCD_CTRL_QDD_IRQ BIT(7)
#define JZ_LCD_CTRL_REVERSE_ENDIAN BIT(6)
#define JZ_LCD_CTRL_LSB_FISRT BIT(5)
#define JZ_LCD_CTRL_DISABLE BIT(4)
#define JZ_LCD_CTRL_ENABLE BIT(3)
#define JZ_LCD_CTRL_BPP_1 0x0
#define JZ_LCD_CTRL_BPP_2 0x1
#define JZ_LCD_CTRL_BPP_4 0x2
#define JZ_LCD_CTRL_BPP_8 0x3
#define JZ_LCD_CTRL_BPP_15_16 0x4
#define JZ_LCD_CTRL_BPP_18_24 0x5
#define JZ_LCD_CTRL_BPP_MASK (JZ_LCD_CTRL_RGB555 | (0x7 << 0))
#define JZ_LCD_CMD_SOF_IRQ BIT(31)
#define JZ_LCD_CMD_EOF_IRQ BIT(30)
#define JZ_LCD_CMD_ENABLE_PAL BIT(28)
#define JZ_LCD_SYNC_MASK 0x3ff
#define JZ_LCD_STATE_EOF_IRQ BIT(5)
#define JZ_LCD_STATE_SOF_IRQ BIT(4)
#define JZ_LCD_STATE_DISABLED BIT(0)
struct ingenic_dma_hwdesc {
u32 next;
u32 addr;
......
/* SPDX-License-Identifier: GPL-2.0 */
//
// Ingenic JZ47xx KMS driver - Register definitions and private API
//
// Copyright (C) 2020, Paul Cercueil <paul@crapouillou.net>
#ifndef DRIVERS_GPU_DRM_INGENIC_INGENIC_DRM_H
#define DRIVERS_GPU_DRM_INGENIC_INGENIC_DRM_H
#include <linux/bitops.h>
#define JZ_REG_LCD_CFG 0x00
#define JZ_REG_LCD_VSYNC 0x04
#define JZ_REG_LCD_HSYNC 0x08
#define JZ_REG_LCD_VAT 0x0C
#define JZ_REG_LCD_DAH 0x10
#define JZ_REG_LCD_DAV 0x14
#define JZ_REG_LCD_PS 0x18
#define JZ_REG_LCD_CLS 0x1C
#define JZ_REG_LCD_SPL 0x20
#define JZ_REG_LCD_REV 0x24
#define JZ_REG_LCD_CTRL 0x30
#define JZ_REG_LCD_STATE 0x34
#define JZ_REG_LCD_IID 0x38
#define JZ_REG_LCD_DA0 0x40
#define JZ_REG_LCD_SA0 0x44
#define JZ_REG_LCD_FID0 0x48
#define JZ_REG_LCD_CMD0 0x4C
#define JZ_REG_LCD_DA1 0x50
#define JZ_REG_LCD_SA1 0x54
#define JZ_REG_LCD_FID1 0x58
#define JZ_REG_LCD_CMD1 0x5C
#define JZ_LCD_CFG_SLCD BIT(31)
#define JZ_LCD_CFG_PS_DISABLE BIT(23)
#define JZ_LCD_CFG_CLS_DISABLE BIT(22)
#define JZ_LCD_CFG_SPL_DISABLE BIT(21)
#define JZ_LCD_CFG_REV_DISABLE BIT(20)
#define JZ_LCD_CFG_HSYNCM BIT(19)
#define JZ_LCD_CFG_PCLKM BIT(18)
#define JZ_LCD_CFG_INV BIT(17)
#define JZ_LCD_CFG_SYNC_DIR BIT(16)
#define JZ_LCD_CFG_PS_POLARITY BIT(15)
#define JZ_LCD_CFG_CLS_POLARITY BIT(14)
#define JZ_LCD_CFG_SPL_POLARITY BIT(13)
#define JZ_LCD_CFG_REV_POLARITY BIT(12)
#define JZ_LCD_CFG_HSYNC_ACTIVE_LOW BIT(11)
#define JZ_LCD_CFG_PCLK_FALLING_EDGE BIT(10)
#define JZ_LCD_CFG_DE_ACTIVE_LOW BIT(9)
#define JZ_LCD_CFG_VSYNC_ACTIVE_LOW BIT(8)
#define JZ_LCD_CFG_18_BIT BIT(7)
#define JZ_LCD_CFG_PDW (BIT(5) | BIT(4))
#define JZ_LCD_CFG_MODE_GENERIC_16BIT 0
#define JZ_LCD_CFG_MODE_GENERIC_18BIT BIT(7)
#define JZ_LCD_CFG_MODE_GENERIC_24BIT BIT(6)
#define JZ_LCD_CFG_MODE_SPECIAL_TFT_1 1
#define JZ_LCD_CFG_MODE_SPECIAL_TFT_2 2
#define JZ_LCD_CFG_MODE_SPECIAL_TFT_3 3
#define JZ_LCD_CFG_MODE_TV_OUT_P 4
#define JZ_LCD_CFG_MODE_TV_OUT_I 6
#define JZ_LCD_CFG_MODE_SINGLE_COLOR_STN 8
#define JZ_LCD_CFG_MODE_SINGLE_MONOCHROME_STN 9
#define JZ_LCD_CFG_MODE_DUAL_COLOR_STN 10
#define JZ_LCD_CFG_MODE_DUAL_MONOCHROME_STN 11
#define JZ_LCD_CFG_MODE_8BIT_SERIAL 12
#define JZ_LCD_CFG_MODE_LCM 13
#define JZ_LCD_VSYNC_VPS_OFFSET 16
#define JZ_LCD_VSYNC_VPE_OFFSET 0
#define JZ_LCD_HSYNC_HPS_OFFSET 16
#define JZ_LCD_HSYNC_HPE_OFFSET 0
#define JZ_LCD_VAT_HT_OFFSET 16
#define JZ_LCD_VAT_VT_OFFSET 0
#define JZ_LCD_DAH_HDS_OFFSET 16
#define JZ_LCD_DAH_HDE_OFFSET 0
#define JZ_LCD_DAV_VDS_OFFSET 16
#define JZ_LCD_DAV_VDE_OFFSET 0
#define JZ_LCD_CTRL_BURST_4 (0x0 << 28)
#define JZ_LCD_CTRL_BURST_8 (0x1 << 28)
#define JZ_LCD_CTRL_BURST_16 (0x2 << 28)
#define JZ_LCD_CTRL_RGB555 BIT(27)
#define JZ_LCD_CTRL_OFUP BIT(26)
#define JZ_LCD_CTRL_FRC_GRAYSCALE_16 (0x0 << 24)
#define JZ_LCD_CTRL_FRC_GRAYSCALE_4 (0x1 << 24)
#define JZ_LCD_CTRL_FRC_GRAYSCALE_2 (0x2 << 24)
#define JZ_LCD_CTRL_PDD_MASK (0xff << 16)
#define JZ_LCD_CTRL_EOF_IRQ BIT(13)
#define JZ_LCD_CTRL_SOF_IRQ BIT(12)
#define JZ_LCD_CTRL_OFU_IRQ BIT(11)
#define JZ_LCD_CTRL_IFU0_IRQ BIT(10)
#define JZ_LCD_CTRL_IFU1_IRQ BIT(9)
#define JZ_LCD_CTRL_DD_IRQ BIT(8)
#define JZ_LCD_CTRL_QDD_IRQ BIT(7)
#define JZ_LCD_CTRL_REVERSE_ENDIAN BIT(6)
#define JZ_LCD_CTRL_LSB_FISRT BIT(5)
#define JZ_LCD_CTRL_DISABLE BIT(4)
#define JZ_LCD_CTRL_ENABLE BIT(3)
#define JZ_LCD_CTRL_BPP_1 0x0
#define JZ_LCD_CTRL_BPP_2 0x1
#define JZ_LCD_CTRL_BPP_4 0x2
#define JZ_LCD_CTRL_BPP_8 0x3
#define JZ_LCD_CTRL_BPP_15_16 0x4
#define JZ_LCD_CTRL_BPP_18_24 0x5
#define JZ_LCD_CTRL_BPP_MASK (JZ_LCD_CTRL_RGB555 | 0x7)
#define JZ_LCD_CMD_SOF_IRQ BIT(31)
#define JZ_LCD_CMD_EOF_IRQ BIT(30)
#define JZ_LCD_CMD_ENABLE_PAL BIT(28)
#define JZ_LCD_SYNC_MASK 0x3ff
#define JZ_LCD_STATE_EOF_IRQ BIT(5)
#define JZ_LCD_STATE_SOF_IRQ BIT(4)
#define JZ_LCD_STATE_DISABLED BIT(0)
#endif /* DRIVERS_GPU_DRM_INGENIC_INGENIC_DRM_H */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment