Commit 4b1295b0 authored by Sebastian Siewior's avatar Sebastian Siewior Committed by Linus Torvalds

spi: fix the read path in spidev

This got broken by the recent "fix rmmod $spi_driver while spidev-user is
active".  I tested the rmmod & write path but didn't check the read path.
I am sorry.  The read logic changed and spidev_sync_read() +
spidev_sync_write() do not return zero on success anymore but the number
of bytes that has been transfered over the bus.  This patch changes the
logic and copy_to_user() gets called again.

The write path returns the number of bytes which are written to the
underlying device what may be less than the requested size.  This patch
makes the same change to the read path or else we request a read of 20
bytes, get 10, don't call copy to user and report to the user that we read
10 bytes.

[akpm@linux-foundation.org: remove test of known-to-be-zero local]
Signed-off-by: default avatarSebastian Siewior <bigeasy@linutronix.de>
Acked-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent bef67c5a
...@@ -167,14 +167,14 @@ spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) ...@@ -167,14 +167,14 @@ spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos)
mutex_lock(&spidev->buf_lock); mutex_lock(&spidev->buf_lock);
status = spidev_sync_read(spidev, count); status = spidev_sync_read(spidev, count);
if (status == 0) { if (status > 0) {
unsigned long missing; unsigned long missing;
missing = copy_to_user(buf, spidev->buffer, count); missing = copy_to_user(buf, spidev->buffer, status);
if (count && missing == count) if (missing == status)
status = -EFAULT; status = -EFAULT;
else else
status = count - missing; status = status - missing;
} }
mutex_unlock(&spidev->buf_lock); mutex_unlock(&spidev->buf_lock);
...@@ -200,8 +200,6 @@ spidev_write(struct file *filp, const char __user *buf, ...@@ -200,8 +200,6 @@ spidev_write(struct file *filp, const char __user *buf,
missing = copy_from_user(spidev->buffer, buf, count); missing = copy_from_user(spidev->buffer, buf, count);
if (missing == 0) { if (missing == 0) {
status = spidev_sync_write(spidev, count); status = spidev_sync_write(spidev, count);
if (status == 0)
status = count;
} else } else
status = -EFAULT; status = -EFAULT;
mutex_unlock(&spidev->buf_lock); mutex_unlock(&spidev->buf_lock);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment