Merge branches 'x86/early-printk', 'x86/microcode' and 'core/objtool' into...

Merge branches 'x86/early-printk', 'x86/microcode' and 'core/objtool' into x86/urgent, to pick up simple topic branches
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Documentation/admin-guide/kernel-parameters.txt

@@ -1068,7 +1068,7 @@
 			earlyprintk=serial[,0x...[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
 			earlyprintk=dbgp[debugController#]
-			earlyprintk=pciserial,bus:device.function[,baudrate]
+			earlyprintk=pciserial[,force],bus:device.function[,baudrate]
 			earlyprintk=xdbc[xhciController#]
 
 			earlyprintk is useful when the kernel crashes before
@@ -1100,6 +1100,10 @@
 
 			The sclp output can only be used on s390.
 
+			The optional "force" to "pciserial" enables use of a
+			PCI device even when its classcode is not of the
+			UART class.
+
 	edac_report=	[HW,EDAC] Control how to report EDAC event
 			Format: {"on" | "off" | "force"}
 			on: enable EDAC to report H/W event. May be overridden

arch/x86/kernel/cpu/microcode/core.c

@@ -666,8 +666,8 @@ static ssize_t pf_show(struct device *dev,
 }
 
 static DEVICE_ATTR_WO(reload);
-static DEVICE_ATTR(version, 0400, version_show, NULL);
-static DEVICE_ATTR(processor_flags, 0400, pf_show, NULL);
+static DEVICE_ATTR(version, 0444, version_show, NULL);
+static DEVICE_ATTR(processor_flags, 0444, pf_show, NULL);
 
 static struct attribute *mc_default_attrs[] = {
 	&dev_attr_version.attr,

arch/x86/kernel/early_printk.c

@@ -213,8 +213,9 @@ static unsigned int mem32_serial_in(unsigned long addr, int offset)
  * early_pci_serial_init()
  *
  * This function is invoked when the early_printk param starts with "pciserial"
- * The rest of the param should be ",B:D.F,baud" where B, D & F describe the
- * location of a PCI device that must be a UART device.
+ * The rest of the param should be "[force],B:D.F,baud", where B, D & F describe
+ * the location of a PCI device that must be a UART device. "force" is optional
+ * and overrides the use of an UART device with a wrong PCI class code.
  */
 static __init void early_pci_serial_init(char *s)
 {
@@ -224,17 +225,23 @@ static __init void early_pci_serial_init(char *s)
 	u32 classcode, bar0;
 	u16 cmdreg;
 	char *e;
+	int force = 0;
 
-
-	/*
-	 * First, part the param to get the BDF values
-	 */
 	if (*s == ',')
 		++s;
 
 	if (*s == 0)
 		return;
 
+	/* Force the use of an UART device with wrong class code */
+	if (!strncmp(s, "force,", 6)) {
+		force = 1;
+		s += 6;
+	}
+
+	/*
+	 * Part the param to get the BDF values
+	 */
 	bus = (u8)simple_strtoul(s, &e, 16);
 	s = e;
 	if (*s != ':')
@@ -253,7 +260,7 @@ static __init void early_pci_serial_init(char *s)
 		s++;
 
 	/*
-	 * Second, find the device from the BDF
+	 * Find the device from the BDF
 	 */
 	cmdreg = read_pci_config(bus, slot, func, PCI_COMMAND);
 	classcode = read_pci_config(bus, slot, func, PCI_CLASS_REVISION);
@@ -264,8 +271,10 @@ static __init void early_pci_serial_init(char *s)
 	 */
 	if (((classcode >> 16 != PCI_CLASS_COMMUNICATION_MODEM) &&
 	     (classcode >> 16 != PCI_CLASS_COMMUNICATION_SERIAL)) ||
-	   (((classcode >> 8) & 0xff) != 0x02)) /* 16550 I/F at BAR0 */
-		return;
+	   (((classcode >> 8) & 0xff) != 0x02)) /* 16550 I/F at BAR0 */ {
+		if (!force)
+			return;
+	}
 
 	/*
 	 * Determine if it is IO or memory mapped
@@ -289,7 +298,7 @@ static __init void early_pci_serial_init(char *s)
 	}
 
 	/*
-	 * Lastly, initialize the hardware
+	 * Initialize the hardware
 	 */
 	if (*s) {
 		if (strcmp(s, "nocfg") == 0)

tools/objtool/check.c

@@ -836,7 +836,7 @@ static int add_switch_table(struct objtool_file *file, struct instruction *insn,
 	struct symbol *pfunc = insn->func->pfunc;
 	unsigned int prev_offset = 0;
 
-	list_for_each_entry_from(rela, &file->rodata->rela->rela_list, list) {
+	list_for_each_entry_from(rela, &table->rela_sec->rela_list, list) {
 		if (rela == next_table)
 			break;
 
@@ -926,6 +926,7 @@ static struct rela *find_switch_table(struct objtool_file *file,
 {
 	struct rela *text_rela, *rodata_rela;
 	struct instruction *orig_insn = insn;
+	struct section *rodata_sec;
 	unsigned long table_offset;
 
 	/*
@@ -953,10 +954,13 @@ static struct rela *find_switch_table(struct objtool_file *file,
 		/* look for a relocation which references .rodata */
 		text_rela = find_rela_by_dest_range(insn->sec, insn->offset,
 						    insn->len);
-		if (!text_rela || text_rela->sym != file->rodata->sym)
+		if (!text_rela || text_rela->sym->type != STT_SECTION ||
+		    !text_rela->sym->sec->rodata)
 			continue;
 
 		table_offset = text_rela->addend;
+		rodata_sec = text_rela->sym->sec;
+
 		if (text_rela->type == R_X86_64_PC32)
 			table_offset += 4;
 
@@ -964,10 +968,10 @@ static struct rela *find_switch_table(struct objtool_file *file,
 		 * Make sure the .rodata address isn't associated with a
 		 * symbol.  gcc jump tables are anonymous data.
 		 */
-		if (find_symbol_containing(file->rodata, table_offset))
+		if (find_symbol_containing(rodata_sec, table_offset))
 			continue;
 
-		rodata_rela = find_rela_by_dest(file->rodata, table_offset);
+		rodata_rela = find_rela_by_dest(rodata_sec, table_offset);
 		if (rodata_rela) {
 			/*
 			 * Use of RIP-relative switch jumps is quite rare, and
@@ -1052,7 +1056,7 @@ static int add_switch_table_alts(struct objtool_file *file)
 	struct symbol *func;
 	int ret;
 
-	if (!file->rodata || !file->rodata->rela)
+	if (!file->rodata)
 		return 0;
 
 	for_each_sec(file, sec) {
@@ -1198,10 +1202,33 @@ static int read_retpoline_hints(struct objtool_file *file)
 	return 0;
 }
 
+static void mark_rodata(struct objtool_file *file)
+{
+	struct section *sec;
+	bool found = false;
+
+	/*
+	 * This searches for the .rodata section or multiple .rodata.func_name
+	 * sections if -fdata-sections is being used. The .str.1.1 and .str.1.8
+	 * rodata sections are ignored as they don't contain jump tables.
+	 */
+	for_each_sec(file, sec) {
+		if (!strncmp(sec->name, ".rodata", 7) &&
+		    !strstr(sec->name, ".str1.")) {
+			sec->rodata = true;
+			found = true;
+		}
+	}
+
+	file->rodata = found;
+}
+
 static int decode_sections(struct objtool_file *file)
 {
 	int ret;
 
+	mark_rodata(file);
+
 	ret = decode_instructions(file);
 	if (ret)
 		return ret;
@@ -2171,7 +2198,6 @@ int check(const char *_objname, bool orc)
 	INIT_LIST_HEAD(&file.insn_list);
 	hash_init(file.insn_hash);
 	file.whitelist = find_section_by_name(file.elf, ".discard.func_stack_frame_non_standard");
-	file.rodata = find_section_by_name(file.elf, ".rodata");
 	file.c_file = find_section_by_name(file.elf, ".comment");
 	file.ignore_unreachables = no_unreachable;
 	file.hints = false;

tools/objtool/check.h

@@ -60,8 +60,8 @@ struct objtool_file {
 	struct elf *elf;
 	struct list_head insn_list;
 	DECLARE_HASHTABLE(insn_hash, 16);
-	struct section *rodata, *whitelist;
-	bool ignore_unreachables, c_file, hints;
+	struct section *whitelist;
+	bool ignore_unreachables, c_file, hints, rodata;
 };
 
 int check(const char *objname, bool orc);

tools/objtool/elf.c

@@ -379,6 +379,7 @@ static int read_relas(struct elf *elf)
 			rela->offset = rela->rela.r_offset;
 			symndx = GELF_R_SYM(rela->rela.r_info);
 			rela->sym = find_symbol_by_index(elf, symndx);
+			rela->rela_sec = sec;
 			if (!rela->sym) {
 				WARN("can't find rela entry symbol %d for %s",
 				     symndx, sec->name);

tools/objtool/elf.h

@@ -48,7 +48,7 @@ struct section {
 	char *name;
 	int idx;
 	unsigned int len;
-	bool changed, text;
+	bool changed, text, rodata;
 };
 
 struct symbol {
@@ -68,6 +68,7 @@ struct rela {
 	struct list_head list;
 	struct hlist_node hash;
 	GElf_Rela rela;
+	struct section *rela_sec;
 	struct symbol *sym;
 	unsigned int type;
 	unsigned long offset;