Commit 4bcdea86 authored by Daniel Mack's avatar Daniel Mack Committed by Greg Kroah-Hartman

drivers/misc/lis3lv02d/lis3lv02d_spi.c: add DT matching table passthru code

If probed from a device tree, this driver now passes the node information
to the generic part, so the runtime information can be derived.

Successfully tested on a PXA3xx board.

[akpm@linux-foundation.org: fix lis302dl_spi_dt_ids unused warning when CONFIG_OF=n]
Signed-off-by: default avatarDaniel Mack <zonque@gmail.com>
Cc: Rob Herring <robherring2@gmail.com>
Cc: "AnilKumar, Chimata" <anilkumar@ti.com>
Reviewed-by: default avatarÉric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent cbac1a8b
......@@ -17,6 +17,8 @@
#include <linux/workqueue.h>
#include <linux/spi/spi.h>
#include <linux/pm.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include "lis3lv02d.h"
......@@ -58,6 +60,14 @@ static int lis3_spi_init(struct lis3lv02d *lis3)
static union axis_conversion lis3lv02d_axis_normal =
{ .as_array = { 1, 2, 3 } };
#ifdef CONFIG_OF
static struct of_device_id lis302dl_spi_dt_ids[] = {
{ .compatible = "st,lis302dl-spi" },
{}
};
MODULE_DEVICE_TABLE(of, lis302dl_spi_dt_ids);
#endif
static int __devinit lis302dl_spi_probe(struct spi_device *spi)
{
int ret;
......@@ -75,6 +85,12 @@ static int __devinit lis302dl_spi_probe(struct spi_device *spi)
lis3_dev.irq = spi->irq;
lis3_dev.ac = lis3lv02d_axis_normal;
lis3_dev.pdata = spi->dev.platform_data;
#ifdef CONFIG_OF
if (of_match_device(lis302dl_spi_dt_ids, &spi->dev))
lis3_dev.of_node = spi->dev.of_node;
#endif
spi_set_drvdata(spi, &lis3_dev);
return lis3lv02d_init_device(&lis3_dev);
......@@ -121,6 +137,7 @@ static struct spi_driver lis302dl_spi_driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
.pm = &lis3lv02d_spi_pm,
.of_match_table = of_match_ptr(lis302dl_spi_dt_ids),
},
.probe = lis302dl_spi_probe,
.remove = __devexit_p(lis302dl_spi_remove),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment