Commit 4bd5d827 authored by Ryan Bradetich's avatar Ryan Bradetich Committed by Kyle McMartin

[PARISC] [MUX] Mux driver bug fix

This patch addresses the problems identified by Russell King in the
following email:

http://lists.parisc-linux.org/pipermail/parisc-linux/2005-December/027912.htmlSigned-off-by: default avatarRyan Bradetich <rbrad@parisc-linux.org>
Signed-off-by: default avatarKyle McMartin <kyle@parisc-linux.org>
parent 075b8783
......@@ -51,7 +51,11 @@
#define MUX_NR 256
static unsigned int port_cnt __read_mostly;
static struct uart_port mux_ports[MUX_NR];
struct mux_port {
struct uart_port port;
int enabled;
};
static struct mux_port mux_ports[MUX_NR];
static struct uart_driver mux_driver = {
.owner = THIS_MODULE,
......@@ -250,7 +254,7 @@ static void mux_read(struct uart_port *port)
*/
static int mux_startup(struct uart_port *port)
{
mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
mux_ports[port->line].enabled = 1;
return 0;
}
......@@ -262,6 +266,7 @@ static int mux_startup(struct uart_port *port)
*/
static void mux_shutdown(struct uart_port *port)
{
mux_ports[port->line].enabled = 0;
}
/**
......@@ -319,7 +324,7 @@ static int mux_request_port(struct uart_port *port)
* @port: Ptr to the uart_port.
* @type: Bitmask of required configurations.
*
* Perform any autoconfiguration steps for the port. This functino is
* Perform any autoconfiguration steps for the port. This function is
* called if the UPF_BOOT_AUTOCONF flag is specified for the port.
* [Note: This is required for now because of a bug in the Serial core.
* rmk has already submitted a patch to linus, should be available for
......@@ -357,11 +362,11 @@ static void mux_poll(unsigned long unused)
int i;
for(i = 0; i < port_cnt; ++i) {
if(!mux_ports[i].info)
if(!mux_ports[i].enabled)
continue;
mux_read(&mux_ports[i]);
mux_write(&mux_ports[i]);
mux_read(&mux_ports[i].port);
mux_write(&mux_ports[i].port);
}
mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
......@@ -456,7 +461,7 @@ static int __init mux_probe(struct parisc_device *dev)
}
for(i = 0; i < ports; ++i, ++port_cnt) {
port = &mux_ports[port_cnt];
port = &mux_ports[port_cnt].port;
port->iobase = 0;
port->mapbase = dev->hpa.start + MUX_OFFSET +
(i * MUX_LINE_OFFSET);
......@@ -484,6 +489,8 @@ static int __init mux_probe(struct parisc_device *dev)
#ifdef CONFIG_SERIAL_MUX_CONSOLE
register_console(&mux_console);
#endif
mod_timer(&mux_timer, jiffies + MUX_POLL_DELAY);
return 0;
}
......@@ -520,9 +527,9 @@ static void __exit mux_exit(void)
int i;
for (i = 0; i < port_cnt; i++) {
uart_remove_one_port(&mux_driver, &mux_ports[i]);
if (mux_ports[i].membase)
iounmap(mux_ports[i].membase);
uart_remove_one_port(&mux_driver, &mux_ports[i].port);
if (mux_ports[i].port.membase)
iounmap(mux_ports[i].port.membase);
}
uart_unregister_driver(&mux_driver);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment