arm64: dts: qcom: sm8450: Throttle the GPU when overheating

Add an 85C passive trip point to ensure the thermal framework takes
sufficient action to prevent reaching junction temperature and a
110C critical point to help avoid hw damage.

Remove the copypasta-from-downstream userspace governor entries while
at it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240510-topic-gpus_are_cool_now-v1-10-ababc269a438@linaro.orgSigned-off-by: Bjorn Andersson <andersson@kernel.org>

arch/arm64/boot/dts/qcom/sm8450.dtsi

@@ -5031,28 +5031,22 @@ map0 {
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu_top_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-cfg {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu_top_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};
@@ -5070,28 +5064,22 @@ map0 {
 			};
 
 			trips {
-				thermal-engine-config {
-					temperature = <125000>;
+				gpu_bottom_alert0: trip-point0 {
+					temperature = <85000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
 
-				thermal-hal-config {
-					temperature = <125000>;
+				trip-point1 {
+					temperature = <90000>;
 					hysteresis = <1000>;
-					type = "passive";
-				};
-
-				reset-mon-cfg {
-					temperature = <115000>;
-					hysteresis = <5000>;
-					type = "passive";
+					type = "hot";
 				};
 
-				gpu_bottom_alert0: trip-point0 {
-					temperature = <95000>;
-					hysteresis = <5000>;
-					type = "passive";
+				trip-point2 {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "critical";
 				};
 			};
 		};