media: move CEC platform drivers to a separate directory

As CEC support doesn't depend on MEDIA_SUPPORT, let's
place the platform drivers outside the media menu.

As a side effect, instead of depends on PCI, seco driver
can select it (and DMI).
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>

drivers/media/cec/Kconfig

@@ -21,7 +21,7 @@ config CEC_PIN_ERROR_INJ
 	help
 	  This option enables CEC error injection using debugfs.
 
-config MEDIA_CEC_SUPPORT
+menuconfig MEDIA_CEC_SUPPORT
 	bool
 	prompt "HDMI CEC drivers"
 	default y if !MEDIA_SUPPORT_FILTER
@@ -31,3 +31,7 @@ config MEDIA_CEC_SUPPORT
 
 	  Say Y when you have an HDMI receiver, transmitter or a USB CEC
 	  adapter that supports HDMI CEC.
+
+if MEDIA_CEC_SUPPORT
+source "drivers/media/cec/platform/Kconfig"
+endif

drivers/media/cec/Makefile

 # SPDX-License-Identifier: GPL-2.0
-obj-y += core/
+obj-y += core/ platform/

drivers/media/cec/platform/Kconfig

+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Platform drivers
+
+config VIDEO_CROS_EC_CEC
+	tristate "ChromeOS EC CEC driver"
+	depends on CROS_EC
+	select CEC_CORE
+	select CEC_NOTIFIER
+	select CROS_EC_PROTO
+	help
+	  If you say yes here you will get support for the
+	  ChromeOS Embedded Controller's CEC.
+	  The CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config VIDEO_MESON_AO_CEC
+	tristate "Amlogic Meson AO CEC driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for Amlogic Meson SoCs AO CEC interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+
+config VIDEO_MESON_G12A_AO_CEC
+	tristate "Amlogic Meson G12A AO CEC driver"
+	depends on ARCH_MESON || COMPILE_TEST
+	depends on COMMON_CLK && OF
+	select REGMAP
+	select REGMAP_MMIO
+	select CEC_CORE
+	select CEC_NOTIFIER
+	---help---
+	  This is a driver for Amlogic Meson G12A SoCs AO CEC interface.
+	  This driver if for the new AO-CEC module found in G12A SoCs,
+	  usually named AO_CEC_B in documentation.
+	  It uses the generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config CEC_GPIO
+	tristate "Generic GPIO-based CEC driver"
+	depends on PREEMPTION || COMPILE_TEST
+	select CEC_CORE
+	select CEC_PIN
+	select CEC_NOTIFIER
+	select GPIOLIB
+	help
+	  This is a generic GPIO-based CEC driver.
+	  The CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config VIDEO_SAMSUNG_S5P_CEC
+	tristate "Samsung S5P CEC driver"
+	depends on ARCH_EXYNOS || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for Samsung S5P HDMI CEC interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config VIDEO_STI_HDMI_CEC
+	tristate "STMicroelectronics STiH4xx HDMI CEC driver"
+	depends on ARCH_STI || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for STIH4xx HDMI CEC interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config VIDEO_STM32_HDMI_CEC
+	tristate "STMicroelectronics STM32 HDMI CEC driver"
+	depends on ARCH_STM32 || COMPILE_TEST
+	select REGMAP
+	select REGMAP_MMIO
+	select CEC_CORE
+	help
+	  This is a driver for STM32 interface. It uses the
+	  generic CEC framework interface.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config VIDEO_TEGRA_HDMI_CEC
+	tristate "Tegra HDMI CEC driver"
+	depends on ARCH_TEGRA || COMPILE_TEST
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for the Tegra HDMI CEC interface. It uses the
+	  generic CEC framework interface.
+	  The CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config VIDEO_SECO_CEC
+	tristate "SECO Boards HDMI CEC driver"
+	depends on (X86 || IA64) || COMPILE_TEST
+	select PCI
+	select DMI
+	select CEC_CORE
+	select CEC_NOTIFIER
+	help
+	  This is a driver for SECO Boards integrated CEC interface.
+	  Selecting it will enable support for this device.
+	  CEC bus is present in the HDMI connector and enables communication
+	  between compatible devices.
+
+config VIDEO_SECO_RC
+	bool "SECO Boards IR RC5 support"
+	depends on VIDEO_SECO_CEC
+	depends on RC_CORE=y || RC_CORE = VIDEO_SECO_CEC
+	help
+	  If you say yes here you will get support for the
+	  SECO Boards Consumer-IR in seco-cec driver.
+	  The embedded controller supports RC5 protocol only, default mapping
+	  is set to rc-hauppauge.

drivers/media/cec/platform/Makefile

+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the CEC platform device drivers.
+#
+
+obj-$(CONFIG_CEC_GPIO)			+= cec-gpio/
+
+obj-$(CONFIG_VIDEO_CROS_EC_CEC)		+= cros-ec/
+obj-$(CONFIG_VIDEO_MESON_AO_CEC)	+= meson/
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC)	+= s5p/
+obj-$(CONFIG_VIDEO_SECO_CEC)		+= seco/
+obj-$(CONFIG_VIDEO_STI_HDMI_CEC)	+= sti/
+obj-$(CONFIG_VIDEO_TEGRA_HDMI_CEC)	+= tegra/
+

drivers/media/cec/platform/stm32/Makefile

+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_VIDEO_STM32_HDMI_CEC) += stm32-cec.o

drivers/media/platform/Kconfig

@@ -552,131 +552,6 @@ if DVB_PLATFORM_DRIVERS
 source "drivers/media/platform/sti/c8sectpfe/Kconfig"
 endif #DVB_PLATFORM_DRIVERS
 
-menuconfig CEC_PLATFORM_DRIVERS
-	bool "CEC platform devices"
-	depends on MEDIA_CEC_SUPPORT
-
-if CEC_PLATFORM_DRIVERS
-
-config VIDEO_CROS_EC_CEC
-	tristate "ChromeOS EC CEC driver"
-	depends on CROS_EC
-	select CEC_CORE
-	select CEC_NOTIFIER
-	select CROS_EC_PROTO
-	help
-	  If you say yes here you will get support for the
-	  ChromeOS Embedded Controller's CEC.
-	  The CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_MESON_AO_CEC
-	tristate "Amlogic Meson AO CEC driver"
-	depends on ARCH_MESON || COMPILE_TEST
-	select CEC_CORE
-	select CEC_NOTIFIER
-	help
-	  This is a driver for Amlogic Meson SoCs AO CEC interface. It uses the
-	  generic CEC framework interface.
-	  CEC bus is present in the HDMI connector and enables communication
-
-config VIDEO_MESON_G12A_AO_CEC
-	tristate "Amlogic Meson G12A AO CEC driver"
-	depends on ARCH_MESON || COMPILE_TEST
-	depends on COMMON_CLK && OF
-	select REGMAP
-	select REGMAP_MMIO
-	select CEC_CORE
-	select CEC_NOTIFIER
-	---help---
-	  This is a driver for Amlogic Meson G12A SoCs AO CEC interface.
-	  This driver if for the new AO-CEC module found in G12A SoCs,
-	  usually named AO_CEC_B in documentation.
-	  It uses the generic CEC framework interface.
-	  CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config CEC_GPIO
-	tristate "Generic GPIO-based CEC driver"
-	depends on PREEMPTION || COMPILE_TEST
-	select CEC_CORE
-	select CEC_PIN
-	select CEC_NOTIFIER
-	select GPIOLIB
-	help
-	  This is a generic GPIO-based CEC driver.
-	  The CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_SAMSUNG_S5P_CEC
-	tristate "Samsung S5P CEC driver"
-	depends on ARCH_EXYNOS || COMPILE_TEST
-	select CEC_CORE
-	select CEC_NOTIFIER
-	help
-	  This is a driver for Samsung S5P HDMI CEC interface. It uses the
-	  generic CEC framework interface.
-	  CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_STI_HDMI_CEC
-	tristate "STMicroelectronics STiH4xx HDMI CEC driver"
-	depends on ARCH_STI || COMPILE_TEST
-	select CEC_CORE
-	select CEC_NOTIFIER
-	help
-	  This is a driver for STIH4xx HDMI CEC interface. It uses the
-	  generic CEC framework interface.
-	  CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_STM32_HDMI_CEC
-	tristate "STMicroelectronics STM32 HDMI CEC driver"
-	depends on ARCH_STM32 || COMPILE_TEST
-	select REGMAP
-	select REGMAP_MMIO
-	select CEC_CORE
-	help
-	  This is a driver for STM32 interface. It uses the
-	  generic CEC framework interface.
-	  CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_TEGRA_HDMI_CEC
-	tristate "Tegra HDMI CEC driver"
-	depends on ARCH_TEGRA || COMPILE_TEST
-	select CEC_CORE
-	select CEC_NOTIFIER
-	help
-	  This is a driver for the Tegra HDMI CEC interface. It uses the
-	  generic CEC framework interface.
-	  The CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_SECO_CEC
-	tristate "SECO Boards HDMI CEC driver"
-	depends on (X86 || IA64) || COMPILE_TEST
-	depends on PCI && DMI
-	select CEC_CORE
-	select CEC_NOTIFIER
-	help
-	  This is a driver for SECO Boards integrated CEC interface.
-	  Selecting it will enable support for this device.
-	  CEC bus is present in the HDMI connector and enables communication
-	  between compatible devices.
-
-config VIDEO_SECO_RC
-	bool "SECO Boards IR RC5 support"
-	depends on VIDEO_SECO_CEC
-	depends on RC_CORE=y || RC_CORE = VIDEO_SECO_CEC
-	help
-	  If you say yes here you will get support for the
-	  SECO Boards Consumer-IR in seco-cec driver.
-	  The embedded controller supports RC5 protocol only, default mapping
-	  is set to rc-hauppauge.
-
-endif #CEC_PLATFORM_DRIVERS
-
 menuconfig SDR_PLATFORM_DRIVERS
 	bool "SDR platform devices"
 	depends on MEDIA_SDR_SUPPORT

drivers/media/platform/Makefile

@@ -23,8 +23,6 @@ obj-$(CONFIG_VIDEO_IMX_PXP)		+= imx-pxp.o
 
 obj-$(CONFIG_VIDEO_SH_VEU)		+= sh_veu.o
 
-obj-$(CONFIG_CEC_GPIO)			+= cec-gpio/
-
 obj-$(CONFIG_VIDEO_MEM2MEM_DEINTERLACE)	+= m2m-deinterlace.o
 
 obj-$(CONFIG_VIDEO_MUX)			+= video-mux.o
@@ -35,22 +33,16 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG)	+= s5p-jpeg/
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC)	+= s5p-mfc/
 
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D)	+= s5p-g2d/
-obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC)	+= s5p-cec/
 obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC)	+= exynos-gsc/
 
 obj-$(CONFIG_VIDEO_STI_BDISP)		+= sti/bdisp/
 obj-$(CONFIG_VIDEO_STI_HVA)		+= sti/hva/
 obj-$(CONFIG_DVB_C8SECTPFE)		+= sti/c8sectpfe/
-obj-$(CONFIG_VIDEO_STI_HDMI_CEC)	+= sti/cec/
 
 obj-$(CONFIG_VIDEO_STI_DELTA)		+= sti/delta/
 
-obj-$(CONFIG_VIDEO_TEGRA_HDMI_CEC)	+= tegra-cec/
-
 obj-y					+= stm32/
 
-obj-$(CONFIG_VIDEO_SECO_CEC)		+= seco-cec/
-
 obj-y					+= davinci/
 
 obj-$(CONFIG_VIDEO_SH_VOU)		+= sh_vou.o
@@ -89,8 +81,4 @@ obj-$(CONFIG_VIDEO_QCOM_CAMSS)		+= qcom/camss/
 
 obj-$(CONFIG_VIDEO_QCOM_VENUS)		+= qcom/venus/
 
-obj-y					+= meson/
-
-obj-y					+= cros-ec-cec/
-
 obj-y					+= sunxi/

drivers/media/platform/stm32/Makefile

 # SPDX-License-Identifier: GPL-2.0-only
 obj-$(CONFIG_VIDEO_STM32_DCMI) += stm32-dcmi.o
-obj-$(CONFIG_VIDEO_STM32_HDMI_CEC) += stm32-cec.o