ASoC: Intel: Power down links before turning off display audio power

On certain platforms, Display HDMI HDA codec was not going to sleep state
after the use when links are powered down after turning off the display
power. As per the HW recommendation, links are powered down before turning
off the display power to ensure that the codec goes to sleep state.

This patch was updated from an earlier version submitted upstream [1]
which conflicted with the changes merged for HDaudio codec support
with the Intel DSP.

[1] https://patchwork.kernel.org/patch/10540213/Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com>
Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>

sound/soc/codecs/hdac_hdmi.c

@@ -2187,11 +2187,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
 	 */
 	snd_hdac_codec_read(hdev, hdev->afg, 0,	AC_VERB_SET_POWER_STATE,
 							AC_PWRST_D3);
-	err = snd_hdac_display_power(bus, false);
-	if (err < 0) {
-		dev_err(dev, "Cannot turn on display power on i915\n");
-		return err;
-	}
 
 	hlink = snd_hdac_ext_bus_get_link(bus, dev_name(dev));
 	if (!hlink) {
@@ -2201,7 +2196,11 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
 
 	snd_hdac_ext_bus_link_put(bus, hlink);
 
-	return 0;
+	err = snd_hdac_display_power(bus, false);
+	if (err < 0)
+		dev_err(dev, "Cannot turn off display power on i915\n");
+
+	return err;
 }
 
 static int hdac_hdmi_runtime_resume(struct device *dev)

sound/soc/intel/skylake/skl.c

@@ -815,6 +815,12 @@ static void skl_probe_work(struct work_struct *work)
 		}
 	}
 
+	/*
+	 * we are done probing so decrement link counts
+	 */
+	list_for_each_entry(hlink, &bus->hlink_list, list)
+		snd_hdac_ext_bus_link_put(bus, hlink);
+
 	if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) {
 		err = snd_hdac_display_power(bus, false);
 		if (err < 0) {
@@ -824,12 +830,6 @@ static void skl_probe_work(struct work_struct *work)
 		}
 	}
 
-	/*
-	 * we are done probing so decrement link counts
-	 */
-	list_for_each_entry(hlink, &bus->hlink_list, list)
-		snd_hdac_ext_bus_link_put(bus, hlink);
-
 	/* configure PM */
 	pm_runtime_put_noidle(bus->dev);
 	pm_runtime_allow(bus->dev);