Commit 4c1dd3e5 authored by Michael Opdenacker's avatar Michael Opdenacker Committed by Shawn Guo

ARM: imx: remove IRQF_DISABLED

This flag is a NOOP since 2.6.35 and can be removed.

This is an update for 3.11 of a patch already sent for 3.10
Signed-off-by: default avatarMichael Opdenacker <michael.opdenacker@free-electrons.com>
Acked-by: default avatarSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: default avatarShawn Guo <shawn.guo@linaro.org>
parent a9aec30d
......@@ -24,7 +24,7 @@ config MXC_IRQ_PRIOR
help
Select this if you want to use prioritized IRQ handling.
This feature prevents higher priority ISR to be interrupted
by lower priority IRQ even IRQF_DISABLED flag is not set.
by lower priority IRQ.
This may be useful in embedded applications, where are strong
requirements for timing.
Say N here, unless you have a specialized requirement.
......
......@@ -171,7 +171,7 @@ static irqreturn_t epit_timer_interrupt(int irq, void *dev_id)
static struct irqaction epit_timer_irq = {
.name = "i.MX EPIT Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = epit_timer_interrupt,
};
......
......@@ -404,8 +404,7 @@ static int armadillo5x0_sdhc1_init(struct device *dev,
/* When supported the trigger type have to be BOTH */
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)),
detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
detect_irq, IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
if (ret)
......
......@@ -311,7 +311,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev,
}
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)),
detect_irq, IRQF_DISABLED |
detect_irq,
IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
"sdhc1-detect", data);
if (ret) {
......
......@@ -371,8 +371,7 @@ static int pcm970_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
#endif
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SCK6)), detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
"sdhc-detect", data);
IRQF_TRIGGER_FALLING, "sdhc-detect", data);
if (ret)
goto err_gpio_free_2;
......
......@@ -130,8 +130,7 @@ static int mxc_mmc1_init(struct device *dev,
gpio_direction_input(gpio_wp);
ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)),
detect_irq,
IRQF_DISABLED | IRQF_TRIGGER_FALLING,
detect_irq, IRQF_TRIGGER_FALLING,
"MMC detect", data);
if (ret)
goto exit_free_wp;
......
......@@ -250,7 +250,7 @@ static irqreturn_t mxc_timer_interrupt(int irq, void *dev_id)
static struct irqaction mxc_timer_irq = {
.name = "i.MX Timer Tick",
.flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = mxc_timer_interrupt,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment