Merge tag 'for-linus' of git://github.com/openrisc/linux

Pull OpenRISC updates from Stafford Horne:
 "One change to simplify Litex CSR (MMIO register) access by limiting
  them to 32-bit offsets.

  Now that this is agreed on among Litex hardware and kernel developers
  it will allow us to start upstreaming other Litex peripheral drivers"

* tag 'for-linus' of git://github.com/openrisc/linux:
  drivers/soc/litex: remove 8-bit subregister option

drivers/soc/litex/Kconfig

@@ -17,16 +17,4 @@ config LITEX_SOC_CONTROLLER
 	  All drivers that use functions from litex.h must depend on
 	  LITEX.
 
-config LITEX_SUBREG_SIZE
-	int "Size of a LiteX CSR subregister, in bytes"
-	depends on LITEX
-	range 1 4
-	default 4
-	help
-	LiteX MMIO registers (referred to as Configuration and Status
-	registers, or CSRs) are spread across adjacent 8- or 32-bit
-	subregisters, located at 32-bit aligned MMIO addresses. Use
-	this to select the appropriate size (1 or 4 bytes) matching
-	your particular LiteX build.
-
 endmenu

drivers/soc/litex/litex_soc_ctrl.c

@@ -62,8 +62,7 @@ static int litex_check_csr_access(void __iomem *reg_addr)
 	/* restore original value of the SCRATCH register */
 	litex_write32(reg_addr + SCRATCH_REG_OFF, SCRATCH_REG_VALUE);
 
-	pr_info("LiteX SoC Controller driver initialized: subreg:%d, align:%d",
-		LITEX_SUBREG_SIZE, LITEX_SUBREG_ALIGN);
+	pr_info("LiteX SoC Controller driver initialized");
 
 	return 0;
 }

include/linux/litex.h

@@ -11,18 +11,6 @@
 
 #include <linux/io.h>
 
-/* LiteX SoCs support 8- or 32-bit CSR Bus data width (i.e., subreg. size) */
-#if defined(CONFIG_LITEX_SUBREG_SIZE) && \
-	(CONFIG_LITEX_SUBREG_SIZE == 1 || CONFIG_LITEX_SUBREG_SIZE == 4)
-#define LITEX_SUBREG_SIZE      CONFIG_LITEX_SUBREG_SIZE
-#else
-#error LiteX subregister size (LITEX_SUBREG_SIZE) must be 4 or 1!
-#endif
-#define LITEX_SUBREG_SIZE_BIT	 (LITEX_SUBREG_SIZE * 8)
-
-/* LiteX subregisters of any width are always aligned on a 4-byte boundary */
-#define LITEX_SUBREG_ALIGN	  0x4
-
 static inline void _write_litex_subregister(u32 val, void __iomem *addr)
 {
 	writel((u32 __force)cpu_to_le32(val), addr);
@@ -42,115 +30,54 @@ static inline u32 _read_litex_subregister(void __iomem *addr)
  * 32-bit wide logical CSR will be laid out as four 32-bit physical
  * subregisters, each one containing one byte of meaningful data.
  *
- * For details see: https://github.com/enjoy-digital/litex/wiki/CSR-Bus
- */
-
-/* number of LiteX subregisters needed to store a register of given reg_size */
-#define _litex_num_subregs(reg_size) \
-	(((reg_size) - 1) / LITEX_SUBREG_SIZE + 1)
-
-/*
- * since the number of 4-byte aligned subregisters required to store a single
- * LiteX CSR (MMIO) register varies with LITEX_SUBREG_SIZE, the offset of the
- * next adjacent LiteX CSR register w.r.t. the offset of the current one also
- * depends on how many subregisters the latter is spread across
- */
-#define _next_reg_off(off, size) \
-	((off) + _litex_num_subregs(size) * LITEX_SUBREG_ALIGN)
-
-/*
- * The purpose of `_litex_[set|get]_reg()` is to implement the logic of
- * writing to/reading from the LiteX CSR in a single place that can be then
- * reused by all LiteX drivers via the `litex_[write|read][8|16|32|64]()`
- * accessors for the appropriate data width.
- * NOTE: direct use of `_litex_[set|get]_reg()` by LiteX drivers is strongly
- * discouraged, as they perform no error checking on the requested data width!
- */
-
-/**
- * _litex_set_reg() - Writes a value to the LiteX CSR (Control&Status Register)
- * @reg: Address of the CSR
- * @reg_size: The width of the CSR expressed in the number of bytes
- * @val: Value to be written to the CSR
+ * For Linux support, upstream LiteX enforces a 32-bit wide CSR bus, which
+ * means that only larger-than-32-bit CSRs will be split across multiple
+ * subregisters (e.g., a 64-bit CSR will be spread across two consecutive
+ * 32-bit subregisters).
  *
- * This function splits a single (possibly multi-byte) LiteX CSR write into
- * a series of subregister writes with a proper offset.
- * NOTE: caller is responsible for ensuring (0 < reg_size <= sizeof(u64)).
- */
-static inline void _litex_set_reg(void __iomem *reg, size_t reg_size, u64 val)
-{
-	u8 shift = _litex_num_subregs(reg_size) * LITEX_SUBREG_SIZE_BIT;
-
-	while (shift > 0) {
-		shift -= LITEX_SUBREG_SIZE_BIT;
-		_write_litex_subregister(val >> shift, reg);
-		reg += LITEX_SUBREG_ALIGN;
-	}
-}
-
-/**
- * _litex_get_reg() - Reads a value of the LiteX CSR (Control&Status Register)
- * @reg: Address of the CSR
- * @reg_size: The width of the CSR expressed in the number of bytes
- *
- * Return: Value read from the CSR
- *
- * This function generates a series of subregister reads with a proper offset
- * and joins their results into a single (possibly multi-byte) LiteX CSR value.
- * NOTE: caller is responsible for ensuring (0 < reg_size <= sizeof(u64)).
+ * For details see: https://github.com/enjoy-digital/litex/wiki/CSR-Bus
  */
-static inline u64 _litex_get_reg(void __iomem *reg, size_t reg_size)
-{
-	u64 r;
-	u8 i;
-
-	r = _read_litex_subregister(reg);
-	for (i = 1; i < _litex_num_subregs(reg_size); i++) {
-		r <<= LITEX_SUBREG_SIZE_BIT;
-		reg += LITEX_SUBREG_ALIGN;
-		r |= _read_litex_subregister(reg);
-	}
-	return r;
-}
 
 static inline void litex_write8(void __iomem *reg, u8 val)
 {
-	_litex_set_reg(reg, sizeof(u8), val);
+	_write_litex_subregister(val, reg);
 }
 
 static inline void litex_write16(void __iomem *reg, u16 val)
 {
-	_litex_set_reg(reg, sizeof(u16), val);
+	_write_litex_subregister(val, reg);
 }
 
 static inline void litex_write32(void __iomem *reg, u32 val)
 {
-	_litex_set_reg(reg, sizeof(u32), val);
+	_write_litex_subregister(val, reg);
 }
 
 static inline void litex_write64(void __iomem *reg, u64 val)
 {
-	_litex_set_reg(reg, sizeof(u64), val);
+	_write_litex_subregister(val >> 32, reg);
+	_write_litex_subregister(val, reg + 4);
 }
 
 static inline u8 litex_read8(void __iomem *reg)
 {
-	return _litex_get_reg(reg, sizeof(u8));
+	return _read_litex_subregister(reg);
 }
 
 static inline u16 litex_read16(void __iomem *reg)
 {
-	return _litex_get_reg(reg, sizeof(u16));
+	return _read_litex_subregister(reg);
 }
 
 static inline u32 litex_read32(void __iomem *reg)
 {
-	return _litex_get_reg(reg, sizeof(u32));
+	return _read_litex_subregister(reg);
 }
 
 static inline u64 litex_read64(void __iomem *reg)
 {
-	return _litex_get_reg(reg, sizeof(u64));
+	return ((u64)_read_litex_subregister(reg) << 32) |
+		_read_litex_subregister(reg + 4);
 }
 
 #endif /* _LINUX_LITEX_H */