Commit 4cbf4772 authored by Bhaskara Budiredla's avatar Bhaskara Budiredla Committed by Will Deacon

dt-bindings: perf: Add YAML schemas for Marvell CN10K LLC-TAD pmu bindings

Add device tree bindings for Last-level-cache Tag-and-data
(LLC-TAD) unit PMU for Marvell CN10K SoCs.
Signed-off-by: default avatarBhaskara Budiredla <bbudiredla@marvell.com>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211115043506.6679-3-bbudiredla@marvell.comSigned-off-by: default avatarWill Deacon <will@kernel.org>
parent 036a7584
# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
%YAML 1.2
---
$id: http://devicetree.org/schemas/perf/marvell-cn10k-tad.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Marvell CN10K LLC-TAD performance monitor
maintainers:
- Bhaskara Budiredla <bbudiredla@marvell.com>
description: |
The Tag-and-Data units (TADs) maintain coherence and contain CN10K
shared on-chip last level cache (LLC). The tad pmu measures the
performance of last-level cache. Each tad pmu supports up to eight
counters.
The DT setup comprises of number of tad blocks, the sizes of pmu
regions, tad blocks and overall base address of the HW.
properties:
compatible:
const: marvell,cn10k-tad-pmu
reg:
maxItems: 1
marvell,tad-cnt:
description: specifies the number of tads on the soc
$ref: /schemas/types.yaml#/definitions/uint32
marvell,tad-page-size:
description: specifies the size of each tad page
$ref: /schemas/types.yaml#/definitions/uint32
marvell,tad-pmu-page-size:
description: specifies the size of page that the pmu uses
$ref: /schemas/types.yaml#/definitions/uint32
required:
- compatible
- reg
- marvell,tad-cnt
- marvell,tad-page-size
- marvell,tad-pmu-page-size
additionalProperties: false
examples:
- |
tad {
#address-cells = <2>;
#size-cells = <2>;
tad_pmu@80000000 {
compatible = "marvell,cn10k-tad-pmu";
reg = <0x87e2 0x80000000 0x0 0x1000>;
marvell,tad-cnt = <1>;
marvell,tad-page-size = <0x1000>;
marvell,tad-pmu-page-size = <0x1000>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment