Commit 4cdf8dbe authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

Pull uaccess.h prepwork from Al Viro:
 "Preparations to tree-wide switch to use of linux/uaccess.h (which,
  obviously, will allow to start unifying stuff for real). The last step
  there, ie

    PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
    sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
            `git grep -l "$PATT"|grep -v ^include/linux/uaccess.h`

  is not taken here - I would prefer to do it once just before or just
  after -rc1.  However, everything should be ready for it"

* 'work.uaccess2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  remove a stray reference to asm/uaccess.h in docs
  sparc64: separate extable_64.h, switch elf_64.h to it
  score: separate extable.h, switch module.h to it
  mips: separate extable.h, switch module.h to it
  x86: separate extable.h, switch sections.h to it
  remove stray include of asm/uaccess.h from cacheflush.h
  mn10300: remove a bogus processor.h->uaccess.h include
  xtensa: split uaccess.h into C and asm sides
  bonding: quit messing with IOCTL
  kill __kernel_ds_p off
  mn10300: finish verify_area() off
  frv: move HAVE_ARCH_UNMAPPED_AREA to pgtable.h
  exceptions: detritus removal
parents 6b25e21f aa7eb9ad
......@@ -483,7 +483,7 @@ printk(KERN_INFO "my ip: %pI4\n", &amp;ipaddress);
<function>get_user()</function>
/
<function>put_user()</function>
<filename class="headerfile">include/asm/uaccess.h</filename>
<filename class="headerfile">include/linux/uaccess.h</filename>
</title>
<para>
......
......@@ -23,7 +23,6 @@ static inline int fsr_fs(unsigned int fsr)
#endif
void do_bad_area(unsigned long addr, unsigned int fsr, struct pt_regs *regs);
unsigned long search_exception_table(unsigned long addr);
void early_abt_enable(void);
#endif /* __ARCH_ARM_FAULT_H */
......@@ -522,5 +522,6 @@ extern void __init pgtable_cache_init(void);
#ifndef __ASSEMBLY__
extern void __init paging_init(void);
#endif /* !__ASSEMBLY__ */
#define HAVE_ARCH_UNMAPPED_AREA
#endif /* _ASM_PGTABLE_H */
......@@ -32,7 +32,6 @@ typedef struct {
#define get_ds() (KERNEL_DS)
#define get_fs() (__current_thread_info->addr_limit)
#define segment_eq(a, b) ((a).seg == (b).seg)
#define __kernel_ds_p() segment_eq(get_fs(), KERNEL_DS)
#define get_addr_limit() (get_fs().seg)
#define set_fs(_x) \
......
......@@ -20,8 +20,6 @@
#include <asm/segment.h>
#include <asm/sections.h>
#define HAVE_ARCH_UNMAPPED_AREA /* we decide where to put mmaps */
#define __ptr(x) ((unsigned long __force *)(x))
#define VERIFY_READ 0
......
......@@ -44,9 +44,6 @@ struct exception_table_entry
unsigned long insn, fixup;
};
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
/*
* These are the main single-value transfer routines. They automatically
......
......@@ -71,9 +71,6 @@ struct exception_table_entry {
unsigned long insn, fixup;
};
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
#ifndef CONFIG_MMU
/* Check against bounds of physical memory */
......
#ifndef _ASM_EXTABLE_H
#define _ASM_EXTABLE_H
struct exception_table_entry
{
unsigned long insn;
unsigned long nextinsn;
};
struct pt_regs;
extern int fixup_exception(struct pt_regs *regs);
#endif
......@@ -3,7 +3,7 @@
#include <linux/list.h>
#include <linux/elf.h>
#include <asm/uaccess.h>
#include <asm/extable.h>
struct mod_arch_specific {
/* Data Bus Error exception tables */
......
......@@ -16,6 +16,7 @@
#include <linux/thread_info.h>
#include <linux/string.h>
#include <asm/asm-eva.h>
#include <asm/extable.h>
/*
* The fs value determines whether argument validity checking should be
......@@ -1485,12 +1486,4 @@ static inline long strnlen_user(const char __user *s, long n)
return res;
}
struct exception_table_entry
{
unsigned long insn;
unsigned long nextinsn;
};
extern int fixup_exception(struct pt_regs *regs);
#endif /* _ASM_UACCESS_H */
......@@ -16,6 +16,7 @@
#include <linux/timer.h>
#include <linux/mutex.h>
#include <linux/uaccess.h>
#include "picvue.h"
......
......@@ -18,7 +18,6 @@
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/cpu-regs.h>
#include <asm/uaccess.h>
#include <asm/current.h>
/* Forward declaration, a strange C thing */
......
......@@ -38,7 +38,6 @@
#define get_ds() (KERNEL_DS)
#define get_fs() (current_thread_info()->addr_limit)
#define set_fs(x) (current_thread_info()->addr_limit = (x))
#define __kernel_ds_p() (current_thread_info()->addr_limit.seg == 0x9FFFFFFF)
#define segment_eq(a, b) ((a).seg == (b).seg)
......@@ -72,12 +71,6 @@ static inline int ___range_ok(unsigned long addr, unsigned int size)
#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
#define __access_ok(addr, size) (__range_ok((addr), (size)) == 0)
static inline int verify_area(int type, const void *addr, unsigned long size)
{
return access_ok(type, addr, size) ? 0 : -EFAULT;
}
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
......
......@@ -75,7 +75,7 @@ static int restore_sigcontext(struct pt_regs *regs,
struct fpucontext *buf;
err |= __get_user(buf, &sc->fpucontext);
if (buf) {
if (verify_area(VERIFY_READ, buf, sizeof(*buf)))
if (!access_ok(VERIFY_READ, buf, sizeof(*buf)))
goto badframe;
err |= fpu_restore_sigcontext(buf);
}
......@@ -98,7 +98,7 @@ asmlinkage long sys_sigreturn(void)
long d0;
frame = (struct sigframe __user *) current_frame()->sp;
if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__get_user(set.sig[0], &frame->sc.oldmask))
goto badframe;
......@@ -130,7 +130,7 @@ asmlinkage long sys_rt_sigreturn(void)
long d0;
frame = (struct rt_sigframe __user *) current_frame()->sp;
if (verify_area(VERIFY_READ, frame, sizeof(*frame)))
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
goto badframe;
......
......@@ -82,10 +82,6 @@ struct exception_table_entry {
unsigned long insn, fixup;
};
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
extern void sort_exception_table(void);
/*
* These are the main single-value transfer routines. They automatically
* use the right size if we just have the right pointer type.
......
#ifndef _ASM_SCORE_EXTABLE_H
#define _ASM_SCORE_EXTABLE_H
struct exception_table_entry {
unsigned long insn;
unsigned long fixup;
};
struct pt_regs;
extern int fixup_exception(struct pt_regs *regs);
#endif
......@@ -2,7 +2,7 @@
#define _ASM_SCORE_MODULE_H
#include <linux/list.h>
#include <asm/uaccess.h>
#include <asm/extable.h>
#include <asm-generic/module.h>
struct mod_arch_specific {
......
......@@ -4,6 +4,7 @@
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/thread_info.h>
#include <asm/extable.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
......@@ -420,12 +421,5 @@ static inline long strnlen_user(const char __user *str, long len)
return __strnlen_user(str, len);
}
struct exception_table_entry {
unsigned long insn;
unsigned long fixup;
};
extern int fixup_exception(struct pt_regs *regs);
#endif /* __SCORE_UACCESS_H */
......@@ -192,8 +192,6 @@ struct exception_table_entry {
#endif
int fixup_exception(struct pt_regs *regs);
/* Returns 0 if exception not found and fixup.unit otherwise. */
unsigned long search_exception_table(unsigned long addr);
const struct exception_table_entry *search_exception_tables(unsigned long addr);
extern void *set_exception_table_vec(unsigned int vec, void *handler);
......
......@@ -7,7 +7,7 @@
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/uaccess.h>
#include <asm/extable_64.h>
#include <asm/spitfire.h>
/*
......
#ifndef __ASM_EXTABLE64_H
#define __ASM_EXTABLE64_H
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry {
unsigned int insn, fixup;
};
#endif
......@@ -13,6 +13,7 @@
#include <asm/asi.h>
#include <asm/spitfire.h>
#include <asm-generic/uaccess-unaligned.h>
#include <asm/extable_64.h>
#endif
#ifndef __ASSEMBLY__
......@@ -81,23 +82,6 @@ static inline int access_ok(int type, const void __user * addr, unsigned long si
return 1;
}
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry {
unsigned int insn, fixup;
};
void __ret_efault(void);
void __retl_efault(void);
......
......@@ -4,7 +4,6 @@
/* Caches aren't brain-dead on the intel. */
#include <asm-generic/cacheflush.h>
#include <asm/special_insns.h>
#include <asm/uaccess.h>
/*
* The set_memory_* API can be used to change various attributes of a virtual
......
#ifndef _ASM_X86_EXTABLE_H
#define _ASM_X86_EXTABLE_H
/*
* The exception table consists of triples of addresses relative to the
* exception table entry itself. The first address is of an instruction
* that is allowed to fault, the second is the target at which the program
* should continue. The third is a handler function to deal with the fault
* caused by the instruction in the first field.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry {
int insn, fixup, handler;
};
struct pt_regs;
#define ARCH_HAS_RELATIVE_EXTABLE
#define swap_ex_entry_fixup(a, b, tmp, delta) \
do { \
(a)->fixup = (b)->fixup + (delta); \
(b)->fixup = (tmp).fixup - (delta); \
(a)->handler = (b)->handler + (delta); \
(b)->handler = (tmp).handler - (delta); \
} while (0)
extern int fixup_exception(struct pt_regs *regs, int trapnr);
extern bool ex_has_fault_handler(unsigned long ip);
extern void early_fixup_exception(struct pt_regs *regs, int trapnr);
#endif
......@@ -2,7 +2,7 @@
#define _ASM_X86_SECTIONS_H
#include <asm-generic/sections.h>
#include <asm/uaccess.h>
#include <asm/extable.h>
extern char __brk_base[], __brk_limit[];
extern struct exception_table_entry __stop___ex_table[];
......
......@@ -11,6 +11,7 @@
#include <asm/asm.h>
#include <asm/page.h>
#include <asm/smap.h>
#include <asm/extable.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
......@@ -90,37 +91,6 @@ static inline bool __chk_range_not_ok(unsigned long addr, unsigned long size, un
#define access_ok(type, addr, size) \
likely(!__range_not_ok(addr, size, user_addr_max()))
/*
* The exception table consists of triples of addresses relative to the
* exception table entry itself. The first address is of an instruction
* that is allowed to fault, the second is the target at which the program
* should continue. The third is a handler function to deal with the fault
* caused by the instruction in the first field.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry {
int insn, fixup, handler;
};
#define ARCH_HAS_RELATIVE_EXTABLE
#define swap_ex_entry_fixup(a, b, tmp, delta) \
do { \
(a)->fixup = (b)->fixup + (delta); \
(b)->fixup = (tmp).fixup - (delta); \
(a)->handler = (b)->handler + (delta); \
(b)->handler = (tmp).handler - (delta); \
} while (0)
extern int fixup_exception(struct pt_regs *regs, int trapnr);
extern bool ex_has_fault_handler(unsigned long ip);
extern void early_fixup_exception(struct pt_regs *regs, int trapnr);
/*
* These are the main single-value transfer routines. They automatically
* use the right size if we just have the right pointer type.
......
......@@ -5,7 +5,7 @@
*/
#include <linux/sched.h> /* test_thread_flag(), ... */
#include <linux/kdebug.h> /* oops_begin/end, ... */
#include <linux/extable.h> /* search_exception_table */
#include <linux/extable.h> /* search_exception_tables */
#include <linux/bootmem.h> /* max_low_pfn */
#include <linux/kprobes.h> /* NOKPROBE_SYMBOL, ... */
#include <linux/mmiotrace.h> /* kmmio_handler, ... */
......
/*
* include/asm-xtensa/uaccess.h
*
* User space memory access functions
*
* These routines provide basic accessing functions to the user memory
* space for the kernel. This header file provides functions such as:
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 2001 - 2005 Tensilica Inc.
*/
#ifndef _XTENSA_ASM_UACCESS_H
#define _XTENSA_ASM_UACCESS_H
#include <linux/errno.h>
#include <asm/types.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
#include <asm/current.h>
#include <asm/asm-offsets.h>
#include <asm/processor.h>
/*
* These assembly macros mirror the C macros in asm/uaccess.h. They
* should always have identical functionality. See
* arch/xtensa/kernel/sys.S for usage.
*/
#define KERNEL_DS 0
#define USER_DS 1
#define get_ds (KERNEL_DS)
/*
* get_fs reads current->thread.current_ds into a register.
* On Entry:
* <ad> anything
* <sp> stack
* On Exit:
* <ad> contains current->thread.current_ds
*/
.macro get_fs ad, sp
GET_CURRENT(\ad,\sp)
#if THREAD_CURRENT_DS > 1020
addi \ad, \ad, TASK_THREAD
l32i \ad, \ad, THREAD_CURRENT_DS - TASK_THREAD
#else
l32i \ad, \ad, THREAD_CURRENT_DS
#endif
.endm
/*
* set_fs sets current->thread.current_ds to some value.
* On Entry:
* <at> anything (temp register)
* <av> value to write
* <sp> stack
* On Exit:
* <at> destroyed (actually, current)
* <av> preserved, value to write
*/
.macro set_fs at, av, sp
GET_CURRENT(\at,\sp)
s32i \av, \at, THREAD_CURRENT_DS
.endm
/*
* kernel_ok determines whether we should bypass addr/size checking.
* See the equivalent C-macro version below for clarity.
* On success, kernel_ok branches to a label indicated by parameter
* <success>. This implies that the macro falls through to the next
* insruction on an error.
*
* Note that while this macro can be used independently, we designed
* in for optimal use in the access_ok macro below (i.e., we fall
* through on error).
*
* On Entry:
* <at> anything (temp register)
* <success> label to branch to on success; implies
* fall-through macro on error
* <sp> stack pointer
* On Exit:
* <at> destroyed (actually, current->thread.current_ds)
*/
#if ((KERNEL_DS != 0) || (USER_DS == 0))
# error Assembly macro kernel_ok fails
#endif
.macro kernel_ok at, sp, success
get_fs \at, \sp
beqz \at, \success
.endm
/*
* user_ok determines whether the access to user-space memory is allowed.
* See the equivalent C-macro version below for clarity.
*
* On error, user_ok branches to a label indicated by parameter
* <error>. This implies that the macro falls through to the next
* instruction on success.
*
* Note that while this macro can be used independently, we designed
* in for optimal use in the access_ok macro below (i.e., we fall
* through on success).
*
* On Entry:
* <aa> register containing memory address
* <as> register containing memory size
* <at> temp register
* <error> label to branch to on error; implies fall-through
* macro on success
* On Exit:
* <aa> preserved
* <as> preserved
* <at> destroyed (actually, (TASK_SIZE + 1 - size))
*/
.macro user_ok aa, as, at, error
movi \at, __XTENSA_UL_CONST(TASK_SIZE)
bgeu \as, \at, \error
sub \at, \at, \as
bgeu \aa, \at, \error
.endm
/*
* access_ok determines whether a memory access is allowed. See the
* equivalent C-macro version below for clarity.
*
* On error, access_ok branches to a label indicated by parameter
* <error>. This implies that the macro falls through to the next
* instruction on success.
*
* Note that we assume success is the common case, and we optimize the
* branch fall-through case on success.
*
* On Entry:
* <aa> register containing memory address
* <as> register containing memory size
* <at> temp register
* <sp>
* <error> label to branch to on error; implies fall-through
* macro on success
* On Exit:
* <aa> preserved
* <as> preserved
* <at> destroyed
*/
.macro access_ok aa, as, at, sp, error
kernel_ok \at, \sp, .Laccess_ok_\@
user_ok \aa, \as, \at, \error
.Laccess_ok_\@:
.endm
#endif /* _XTENSA_ASM_UACCESS_H */
......@@ -17,153 +17,12 @@
#define _XTENSA_UACCESS_H
#include <linux/errno.h>
#ifndef __ASSEMBLY__
#include <linux/prefetch.h>
#endif
#include <asm/types.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
#ifdef __ASSEMBLY__
#include <asm/current.h>
#include <asm/asm-offsets.h>
#include <asm/processor.h>
/*
* These assembly macros mirror the C macros that follow below. They
* should always have identical functionality. See
* arch/xtensa/kernel/sys.S for usage.
*/
#define KERNEL_DS 0
#define USER_DS 1
#define get_ds (KERNEL_DS)
/*
* get_fs reads current->thread.current_ds into a register.
* On Entry:
* <ad> anything
* <sp> stack
* On Exit:
* <ad> contains current->thread.current_ds
*/
.macro get_fs ad, sp
GET_CURRENT(\ad,\sp)
#if THREAD_CURRENT_DS > 1020
addi \ad, \ad, TASK_THREAD
l32i \ad, \ad, THREAD_CURRENT_DS - TASK_THREAD
#else
l32i \ad, \ad, THREAD_CURRENT_DS
#endif
.endm
/*
* set_fs sets current->thread.current_ds to some value.
* On Entry:
* <at> anything (temp register)
* <av> value to write
* <sp> stack
* On Exit:
* <at> destroyed (actually, current)
* <av> preserved, value to write
*/
.macro set_fs at, av, sp
GET_CURRENT(\at,\sp)
s32i \av, \at, THREAD_CURRENT_DS
.endm
/*
* kernel_ok determines whether we should bypass addr/size checking.
* See the equivalent C-macro version below for clarity.
* On success, kernel_ok branches to a label indicated by parameter
* <success>. This implies that the macro falls through to the next
* insruction on an error.
*
* Note that while this macro can be used independently, we designed
* in for optimal use in the access_ok macro below (i.e., we fall
* through on error).
*
* On Entry:
* <at> anything (temp register)
* <success> label to branch to on success; implies
* fall-through macro on error
* <sp> stack pointer
* On Exit:
* <at> destroyed (actually, current->thread.current_ds)
*/
#if ((KERNEL_DS != 0) || (USER_DS == 0))
# error Assembly macro kernel_ok fails
#endif
.macro kernel_ok at, sp, success
get_fs \at, \sp
beqz \at, \success
.endm
/*
* user_ok determines whether the access to user-space memory is allowed.
* See the equivalent C-macro version below for clarity.
*
* On error, user_ok branches to a label indicated by parameter
* <error>. This implies that the macro falls through to the next
* instruction on success.
*
* Note that while this macro can be used independently, we designed
* in for optimal use in the access_ok macro below (i.e., we fall
* through on success).
*
* On Entry:
* <aa> register containing memory address
* <as> register containing memory size
* <at> temp register
* <error> label to branch to on error; implies fall-through
* macro on success
* On Exit:
* <aa> preserved
* <as> preserved
* <at> destroyed (actually, (TASK_SIZE + 1 - size))
*/
.macro user_ok aa, as, at, error
movi \at, __XTENSA_UL_CONST(TASK_SIZE)
bgeu \as, \at, \error
sub \at, \at, \as
bgeu \aa, \at, \error
.endm
/*
* access_ok determines whether a memory access is allowed. See the
* equivalent C-macro version below for clarity.
*
* On error, access_ok branches to a label indicated by parameter
* <error>. This implies that the macro falls through to the next
* instruction on success.
*
* Note that we assume success is the common case, and we optimize the
* branch fall-through case on success.
*
* On Entry:
* <aa> register containing memory address
* <as> register containing memory size
* <at> temp register
* <sp>
* <error> label to branch to on error; implies fall-through
* macro on success
* On Exit:
* <aa> preserved
* <as> preserved
* <at> destroyed
*/
.macro access_ok aa, as, at, sp, error
kernel_ok \at, \sp, .Laccess_ok_\@
user_ok \aa, \as, \at, \error
.Laccess_ok_\@:
.endm
#else /* __ASSEMBLY__ not defined */
#include <linux/sched.h>
/*
......@@ -495,16 +354,4 @@ struct exception_table_entry
unsigned long insn, fixup;
};
/* Returns 0 if exception not found and fixup.unit otherwise. */
extern unsigned long search_exception_table(unsigned long addr);
extern void sort_exception_table(void);
/* Returns the new pc */
#define fixup_exception(map_reg, fixup_unit, pc) \
({ \
fixup_unit; \
})
#endif /* __ASSEMBLY__ */
#endif /* _XTENSA_UACCESS_H */
......@@ -17,7 +17,7 @@
#include <asm/processor.h>
#include <asm/coprocessor.h>
#include <asm/thread_info.h>
#include <asm/uaccess.h>
#include <asm/asm-uaccess.h>
#include <asm/unistd.h>
#include <asm/ptrace.h>
#include <asm/current.h>
......
......@@ -17,7 +17,7 @@
#include <asm/processor.h>
#include <asm/coprocessor.h>
#include <asm/thread_info.h>
#include <asm/uaccess.h>
#include <asm/asm-uaccess.h>
#include <asm/unistd.h>
#include <asm/ptrace.h>
#include <asm/current.h>
......
......@@ -21,6 +21,7 @@
#include <linux/fs.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/uaccess.h>
#include <asm/io.h>
#include <asm/reboot.h>
......
......@@ -471,9 +471,9 @@ static int bond_check_dev_link(struct bonding *bond,
/* Yes, the mii is overlaid on the ifreq.ifr_ifru */
strncpy(ifr.ifr_name, slave_dev->name, IFNAMSIZ);
mii = if_mii(&ifr);
if (IOCTL(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
if (ioctl(slave_dev, &ifr, SIOCGMIIPHY) == 0) {
mii->reg_num = MII_BMSR;
if (IOCTL(slave_dev, &ifr, SIOCGMIIREG) == 0)
if (ioctl(slave_dev, &ifr, SIOCGMIIREG) == 0)
return mii->val_out & BMSR_LSTATUS;
}
}
......
......@@ -24,6 +24,7 @@
#include <linux/acpi.h>
#include <linux/interrupt.h>
#include <linux/miscdevice.h>
#include <linux/uaccess.h>
struct smo8800_device {
u32 irq; /* acpi device irq */
......
......@@ -43,6 +43,7 @@
#include <linux/ctype.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/uaccess.h>
#include <asm/mach-au1x00/au1000.h>
#include <asm/mach-au1x00/au1200fb.h> /* platform_data */
......
......@@ -35,6 +35,7 @@
#include <linux/err.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/uaccess.h>
#define DRIVER_NAME "ath79-wdt"
......
......@@ -69,10 +69,6 @@ struct exception_table_entry
unsigned long insn, fixup;
};
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
/*
* architectures with an MMU should override these two
*/
......
......@@ -37,18 +37,6 @@
#ifndef __long_aligned
#define __long_aligned __attribute__((aligned((sizeof(long)))))
#endif
/*
* Less bad way to call ioctl from within the kernel; this needs to be
* done some other way to get the call out of interrupt context.
* Needs "ioctl" variable to be supplied by calling context.
*/
#define IOCTL(dev, arg, cmd) ({ \
int res = 0; \
mm_segment_t fs = get_fs(); \
set_fs(get_ds()); \
res = ioctl(dev, arg, cmd); \
set_fs(fs); \
res; })
#define BOND_MODE(bond) ((bond)->params.mode)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment