spi: add power control when set_cs_timing

As to set_cs_timing takes effect immediately, power spi
is needed when call spi_set_cs_timing.
Signed-off-by: leilk.liu <leilk.liu@mediatek.com>
Link: https://lore.kernel.org/r/20210207030953.9297-2-leilk.liu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

drivers/spi/spi.c

@@ -3460,11 +3460,30 @@ EXPORT_SYMBOL_GPL(spi_setup);
 int spi_set_cs_timing(struct spi_device *spi, struct spi_delay *setup,
 		      struct spi_delay *hold, struct spi_delay *inactive)
 {
+	struct device *parent = spi->controller->dev.parent;
 	size_t len;
+	int status;
+
+	if (spi->controller->set_cs_timing) {
+		if (spi->controller->auto_runtime_pm) {
+			status = pm_runtime_get_sync(parent);
+			if (status < 0) {
+				pm_runtime_put_noidle(parent);
+				dev_err(&spi->controller->dev, "Failed to power device: %d\n",
+					status);
+				return status;
+			}
 
-	if (spi->controller->set_cs_timing)
-		return spi->controller->set_cs_timing(spi, setup, hold,
-						      inactive);
+			status = spi->controller->set_cs_timing(spi, setup,
+								hold, inactive);
+			pm_runtime_mark_last_busy(parent);
+			pm_runtime_put_autosuspend(parent);
+			return status;
+		} else {
+			return spi->controller->set_cs_timing(spi, setup, hold,
+							      inactive);
+		}
+	}
 
 	if ((setup && setup->unit == SPI_DELAY_UNIT_SCK) ||
 	    (hold && hold->unit == SPI_DELAY_UNIT_SCK) ||