Commit 4d0fa79e authored by Andrzej Pietrasiewicz's avatar Andrzej Pietrasiewicz Committed by Felipe Balbi

Documentation: usb: NCM function testing

Summary of how to test NCM function of USB gadget.
Signed-off-by: default avatarAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Signed-off-by: default avatarFelipe Balbi <balbi@ti.com>
parent 0d6be59a
......@@ -10,6 +10,7 @@ provided by gadgets.
7. LOOPBACK function
8. MASS STORAGE function
9. MIDI function
10. NCM function
1. ACM function
......@@ -366,3 +367,36 @@ $ aconnect 24:0 128:0 # try it on the host
After the gadget's MIDI port is connected to timidity's MIDI port,
whatever is played at the gadget side with aplaymidi -l is audible
in host's speakers/headphones.
10. NCM function
================
The function is provided by usb_f_ncm.ko module.
Function-specific configfs interface
------------------------------------
The function name to use when creating the function directory is "ncm".
The NCM function provides these attributes in its function directory:
ifname - network device interface name associated with this
function instance
qmult - queue length multiplier for high and super speed
host_addr - MAC address of host's end of this
Ethernet over USB link
dev_addr - MAC address of device's end of this
Ethernet over USB link
and after creating the functions/ncm.<instance name> they contain default
values: qmult is 5, dev_addr and host_addr are randomly selected.
Except for ifname they can be written to until the function is linked to a
configuration. The ifname is read-only and contains the name of the interface
which was assigned by the net core, e. g. usb0.
Testing the NCM function
------------------------
Configure IP addresses of the device and the host. Then:
On the device: ping <host's IP>
On the host: ping <device's IP>
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment