scsi: be2iscsi: Fix POST check and reset sequence

SLIPORT FUNCTION_RESET does not reset the chip.
So POST status needs to be checked before issuing FUNCTION_RESET.
The completion of FUNCTION_RESET is indicated in BMBX Rdy bit.

be_cmd_fw_initialize too needs to be done before issuing any cmd to FW.
be_cmd_fw_initialize is renamed as beiscsi_cmd_special_wrb.
Rearrange and rename few functions in init and cleanup path.
Signed-off-by: Jitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/be2iscsi/be_cmds.c

@@ -21,35 +21,6 @@
 #include "be.h"
 #include "be_mgmt.h"
 
-int be_chk_reset_complete(struct beiscsi_hba *phba)
-{
-	unsigned int num_loop;
-	u8 *mpu_sem = 0;
-	u32 status;
-
-	num_loop = 1000;
-	mpu_sem = (u8 *)phba->csr_va + MPU_EP_SEMAPHORE;
-	msleep(5000);
-
-	while (num_loop) {
-		status = readl((void *)mpu_sem);
-
-		if ((status & 0x80000000) || (status & 0x0000FFFF) == 0xC000)
-			break;
-		msleep(60);
-		num_loop--;
-	}
-
-	if ((status & 0x80000000) || (!num_loop)) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BC_%d : Failed in be_chk_reset_complete"
-			    "status = 0x%x\n", status);
-		return -EIO;
-	}
-
-	return 0;
-}
-
 struct be_mcc_wrb *alloc_mcc_wrb(struct beiscsi_hba *phba,
 				 unsigned int *ref_tag)
 {
@@ -769,87 +740,6 @@ int beiscsi_cmd_eq_create(struct be_ctrl_info *ctrl,
 	return status;
 }
 
-/**
- * be_cmd_fw_initialize()- Initialize FW
- * @ctrl: Pointer to function control structure
- *
- * Send FW initialize pattern for the function.
- *
- * return
- * Success: 0
- * Failure: Non-Zero value
- **/
-int be_cmd_fw_initialize(struct be_ctrl_info *ctrl)
-{
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
-	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
-	int status;
-	u8 *endian_check;
-
-	mutex_lock(&ctrl->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
-
-	endian_check = (u8 *) wrb;
-	*endian_check++ = 0xFF;
-	*endian_check++ = 0x12;
-	*endian_check++ = 0x34;
-	*endian_check++ = 0xFF;
-	*endian_check++ = 0xFF;
-	*endian_check++ = 0x56;
-	*endian_check++ = 0x78;
-	*endian_check++ = 0xFF;
-	be_dws_cpu_to_le(wrb, sizeof(*wrb));
-
-	status = be_mbox_notify(ctrl);
-	if (status)
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BC_%d : be_cmd_fw_initialize Failed\n");
-
-	mutex_unlock(&ctrl->mbox_lock);
-	return status;
-}
-
-/**
- * be_cmd_fw_uninit()- Uinitialize FW
- * @ctrl: Pointer to function control structure
- *
- * Send FW uninitialize pattern for the function
- *
- * return
- * Success: 0
- * Failure: Non-Zero value
- **/
-int be_cmd_fw_uninit(struct be_ctrl_info *ctrl)
-{
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
-	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
-	int status;
-	u8 *endian_check;
-
-	mutex_lock(&ctrl->mbox_lock);
-	memset(wrb, 0, sizeof(*wrb));
-
-	endian_check = (u8 *) wrb;
-	*endian_check++ = 0xFF;
-	*endian_check++ = 0xAA;
-	*endian_check++ = 0xBB;
-	*endian_check++ = 0xFF;
-	*endian_check++ = 0xFF;
-	*endian_check++ = 0xCC;
-	*endian_check++ = 0xDD;
-	*endian_check = 0xFF;
-
-	be_dws_cpu_to_le(wrb, sizeof(*wrb));
-
-	status = be_mbox_notify(ctrl);
-	if (status)
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BC_%d : be_cmd_fw_uninit Failed\n");
-
-	mutex_unlock(&ctrl->mbox_lock);
-	return status;
-}
-
 int beiscsi_cmd_cq_create(struct be_ctrl_info *ctrl,
 			  struct be_queue_info *cq, struct be_queue_info *eq,
 			  bool sol_evts, bool no_delay, int coalesce_wm)
@@ -1293,25 +1183,6 @@ int be_cmd_iscsi_post_sgl_pages(struct be_ctrl_info *ctrl,
 	return status;
 }
 
-int beiscsi_cmd_reset_function(struct beiscsi_hba  *phba)
-{
-	struct be_ctrl_info *ctrl = &phba->ctrl;
-	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
-	struct be_post_sgl_pages_req *req = embedded_payload(wrb);
-	int status;
-
-	mutex_lock(&ctrl->mbox_lock);
-
-	req = embedded_payload(wrb);
-	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
-	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
-			   OPCODE_COMMON_FUNCTION_RESET, sizeof(*req));
-	status = be_mbox_notify(ctrl);
-
-	mutex_unlock(&ctrl->mbox_lock);
-	return status;
-}
-
 /**
  * be_cmd_set_vlan()- Configure VLAN paramters on the adapter
  * @phba: device priv structure instance
@@ -1653,3 +1524,124 @@ int beiscsi_set_uer_feature(struct beiscsi_hba *phba)
 	mutex_unlock(&ctrl->mbox_lock);
 	return ret;
 }
+
+static u32 beiscsi_get_post_stage(struct beiscsi_hba *phba)
+{
+	u32 sem;
+
+	if (is_chip_be2_be3r(phba))
+		sem = ioread32(phba->csr_va + SLIPORT_SEMAPHORE_OFFSET_BEx);
+	else
+		pci_read_config_dword(phba->pcidev,
+				      SLIPORT_SEMAPHORE_OFFSET_SH, &sem);
+	return sem;
+}
+
+int beiscsi_check_fw_rdy(struct beiscsi_hba *phba)
+{
+	u32 loop, post, rdy = 0;
+
+	loop = 1000;
+	while (loop--) {
+		post = beiscsi_get_post_stage(phba);
+		if (post & POST_ERROR_BIT)
+			break;
+		if ((post & POST_STAGE_MASK) == POST_STAGE_ARMFW_RDY) {
+			rdy = 1;
+			break;
+		}
+		msleep(60);
+	}
+
+	if (!rdy) {
+		__beiscsi_log(phba, KERN_ERR,
+			      "BC_%d : FW not ready 0x%x\n", post);
+	}
+
+	return rdy;
+}
+
+static int beiscsi_cmd_function_reset(struct beiscsi_hba  *phba)
+{
+	struct be_ctrl_info *ctrl = &phba->ctrl;
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct be_post_sgl_pages_req *req = embedded_payload(wrb);
+	int status;
+
+	mutex_lock(&ctrl->mbox_lock);
+
+	req = embedded_payload(wrb);
+	be_wrb_hdr_prepare(wrb, sizeof(*req), true, 0);
+	be_cmd_hdr_prepare(&req->hdr, CMD_SUBSYSTEM_COMMON,
+			   OPCODE_COMMON_FUNCTION_RESET, sizeof(*req));
+	status = be_mbox_notify(ctrl);
+
+	mutex_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+int beiscsi_cmd_special_wrb(struct be_ctrl_info *ctrl, u32 load)
+{
+	struct be_mcc_wrb *wrb = wrb_from_mbox(&ctrl->mbox_mem);
+	struct beiscsi_hba *phba = pci_get_drvdata(ctrl->pdev);
+	u8 *endian_check;
+	int status;
+
+	mutex_lock(&ctrl->mbox_lock);
+	memset(wrb, 0, sizeof(*wrb));
+
+	endian_check = (u8 *) wrb;
+	if (load) {
+		/* to start communicating */
+		*endian_check++ = 0xFF;
+		*endian_check++ = 0x12;
+		*endian_check++ = 0x34;
+		*endian_check++ = 0xFF;
+		*endian_check++ = 0xFF;
+		*endian_check++ = 0x56;
+		*endian_check++ = 0x78;
+		*endian_check++ = 0xFF;
+	} else {
+		/* to stop communicating */
+		*endian_check++ = 0xFF;
+		*endian_check++ = 0xAA;
+		*endian_check++ = 0xBB;
+		*endian_check++ = 0xFF;
+		*endian_check++ = 0xFF;
+		*endian_check++ = 0xCC;
+		*endian_check++ = 0xDD;
+		*endian_check = 0xFF;
+	}
+	be_dws_cpu_to_le(wrb, sizeof(*wrb));
+
+	status = be_mbox_notify(ctrl);
+	if (status)
+		beiscsi_log(phba, KERN_INFO, BEISCSI_LOG_INIT,
+			    "BC_%d : special WRB message failed\n");
+	mutex_unlock(&ctrl->mbox_lock);
+	return status;
+}
+
+int beiscsi_init_sliport(struct beiscsi_hba *phba)
+{
+	int status;
+
+	/* check POST stage before talking to FW */
+	status = beiscsi_check_fw_rdy(phba);
+	if (!status)
+		return -EIO;
+
+	/*
+	 * SLI COMMON_FUNCTION_RESET completion is indicated by BMBX RDY bit.
+	 * It should clean up any stale info in FW for this fn.
+	 */
+	status = beiscsi_cmd_function_reset(phba);
+	if (status) {
+		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
+			    "BC_%d : SLI Function Reset failed\n");
+		return status;
+	}
+
+	/* indicate driver is loading */
+	return beiscsi_cmd_special_wrb(&phba->ctrl, 1);
+}

drivers/scsi/be2iscsi/be_cmds.h

@@ -98,11 +98,23 @@ struct be_mcc_compl {
 #define MPU_MAILBOX_DB_RDY_MASK	0x1	/* bit 0 */
 #define MPU_MAILBOX_DB_HI_MASK	0x2	/* bit 1 */
 
-/********** MPU semphore ******************/
-#define MPU_EP_SEMAPHORE_OFFSET 0xac
-#define EP_SEMAPHORE_POST_STAGE_MASK 0x0000FFFF
-#define EP_SEMAPHORE_POST_ERR_MASK 0x1
-#define EP_SEMAPHORE_POST_ERR_SHIFT 31
+/********** MPU semphore: used for SH & BE ******************/
+#define SLIPORT_SOFTRESET_OFFSET		0x5c	/* CSR BAR offset */
+#define SLIPORT_SEMAPHORE_OFFSET_BEx		0xac	/* CSR BAR offset */
+#define SLIPORT_SEMAPHORE_OFFSET_SH		0x94	/* PCI-CFG offset */
+#define POST_STAGE_MASK				0x0000FFFF
+#define POST_ERROR_BIT				0x80000000
+#define POST_ERR_RECOVERY_CODE_MASK		0xF000
+
+/* Soft Reset register masks */
+#define SLIPORT_SOFTRESET_SR_MASK		0x00000080	/* SR bit */
+
+/* MPU semphore POST stage values */
+#define POST_STAGE_AWAITING_HOST_RDY	0x1 /* FW awaiting goahead from host */
+#define POST_STAGE_HOST_RDY		0x2 /* Host has given go-ahed to FW */
+#define POST_STAGE_BE_RESET		0x3 /* Host wants to reset chip */
+#define POST_STAGE_ARMFW_RDY		0xC000 /* FW is done with POST */
+#define POST_STAGE_RECOVERABLE_ERR	0xE000 /* Recoverable err detected */
 
 /********** MCC door bell ************/
 #define DB_MCCQ_OFFSET 0x140
@@ -110,9 +122,6 @@ struct be_mcc_compl {
 /* Number of entries posted */
 #define DB_MCCQ_NUM_POSTED_SHIFT 16		/* bits 16 - 29 */
 
-/* MPU semphore POST stage values */
-#define POST_STAGE_ARMFW_RDY		0xc000	/* FW is done with POST */
-
 /**
  * When the async bit of mcc_compl is set, the last 4 bytes of
  * mcc_compl is interpreted as follows:
@@ -753,6 +762,12 @@ struct be_cmd_set_features {
 	} param;
 } __packed;
 
+int beiscsi_cmd_special_wrb(struct be_ctrl_info *ctrl, u32 load);
+
+int beiscsi_check_fw_rdy(struct beiscsi_hba *phba);
+
+int beiscsi_init_sliport(struct beiscsi_hba *phba);
+
 int beiscsi_cmd_eq_create(struct be_ctrl_info *ctrl,
 			  struct be_queue_info *eq, int eq_delay);
 
@@ -784,9 +799,6 @@ int __beiscsi_mcc_compl_status(struct beiscsi_hba *phba,
 			       struct be_mcc_wrb **wrb,
 			       struct be_dma_mem *mbx_cmd_mem);
 /*ISCSI Functuions */
-int be_cmd_fw_initialize(struct be_ctrl_info *ctrl);
-int be_cmd_fw_uninit(struct be_ctrl_info *ctrl);
-
 struct be_mcc_wrb *wrb_from_mbox(struct be_dma_mem *mbox_mem);
 int be_mcc_compl_poll(struct beiscsi_hba *phba, unsigned int tag);
 void be_mcc_notify(struct beiscsi_hba *phba, unsigned int tag);
@@ -812,8 +824,6 @@ int be_cmd_iscsi_post_sgl_pages(struct be_ctrl_info *ctrl,
 				struct be_dma_mem *q_mem, u32 page_offset,
 				u32 num_pages);
 
-int beiscsi_cmd_reset_function(struct beiscsi_hba *phba);
-
 int be_cmd_wrbq_create(struct be_ctrl_info *ctrl, struct be_dma_mem *q_mem,
 		       struct be_queue_info *wrbq,
 		       struct hwi_wrb_context *pwrb_context,
@@ -1422,8 +1432,6 @@ struct be_cmd_get_port_name {
 						 * the cxn
 						 */
 
-int be_chk_reset_complete(struct beiscsi_hba *phba);
-
 void be_wrb_hdr_prepare(struct be_mcc_wrb *wrb, int payload_len,
 			bool embedded, u8 sge_cnt);
 

drivers/scsi/be2iscsi/be_main.c

@@ -3544,7 +3544,7 @@ static void be_mcc_queues_destroy(struct beiscsi_hba *phba)
 	}
 }
 
-static void hwi_cleanup(struct beiscsi_hba *phba)
+static void hwi_cleanup_port(struct beiscsi_hba *phba)
 {
 	struct be_queue_info *q;
 	struct be_ctrl_info *ctrl = &phba->ctrl;
@@ -3603,7 +3603,8 @@ static void hwi_cleanup(struct beiscsi_hba *phba)
 			beiscsi_cmd_q_destroy(ctrl, q, QTYPE_EQ);
 		}
 	}
-	be_cmd_fw_uninit(ctrl);
+	/* last communication, indicate driver is unloading */
+	beiscsi_cmd_special_wrb(&phba->ctrl, 0);
 }
 
 static int be_mcc_queues_create(struct beiscsi_hba *phba,
@@ -3700,8 +3701,7 @@ static int hwi_init_port(struct beiscsi_hba *phba)
 	phwi_context->max_eqd = 128;
 	phwi_context->min_eqd = 0;
 	phwi_context->cur_eqd = 0;
-	be_cmd_fw_initialize(&phba->ctrl);
-	/* set optic state to unknown */
+	/* set port optic state to unknown */
 	phba->optic_state = 0xff;
 
 	status = beiscsi_create_eqs(phba, phwi_context);
@@ -3807,7 +3807,7 @@ static int hwi_init_port(struct beiscsi_hba *phba)
 error:
 	beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
 		    "BM_%d : hwi_init_port failed");
-	hwi_cleanup(phba);
+	hwi_cleanup_port(phba);
 	return status;
 }
 
@@ -4196,7 +4196,7 @@ static int beiscsi_init_port(struct beiscsi_hba *phba)
 	return ret;
 
 do_cleanup_ctrlr:
-	hwi_cleanup(phba);
+	hwi_cleanup_port(phba);
 	return ret;
 }
 
@@ -4233,7 +4233,7 @@ static void hwi_purge_eq(struct beiscsi_hba *phba)
 	}
 }
 
-static void beiscsi_clean_port(struct beiscsi_hba *phba)
+static void beiscsi_cleanup_port(struct beiscsi_hba *phba)
 {
 	int mgmt_status, ulp_num;
 	struct ulp_cid_info *ptr_cid_info = NULL;
@@ -4250,7 +4250,7 @@ static void beiscsi_clean_port(struct beiscsi_hba *phba)
 	}
 
 	hwi_purge_eq(phba);
-	hwi_cleanup(phba);
+	hwi_cleanup_port(phba);
 	kfree(phba->io_sgl_hndl_base);
 	kfree(phba->eh_sgl_hndl_base);
 	kfree(phba->ep_array);
@@ -5011,12 +5011,12 @@ static void beiscsi_quiesce(struct beiscsi_hba *phba)
 	/* PCI_ERR is set then check if driver is not unloading */
 	if (test_bit(BEISCSI_HBA_RUNNING, &phba->state) &&
 	    test_bit(BEISCSI_HBA_PCI_ERR, &phba->state)) {
-		hwi_cleanup(phba);
+		hwi_cleanup_port(phba);
 		return;
 	}
 
 	destroy_workqueue(phba->wq);
-	beiscsi_clean_port(phba);
+	beiscsi_cleanup_port(phba);
 	beiscsi_free_mem(phba);
 
 	beiscsi_unmap_pci_function(phba);
@@ -5461,9 +5461,8 @@ static pci_ers_result_t beiscsi_eeh_reset(struct pci_dev *pdev)
 	pci_set_power_state(pdev, PCI_D0);
 	pci_restore_state(pdev);
 
-	/* Wait for the CHIP Reset to complete */
-	status = be_chk_reset_complete(phba);
-	if (!status) {
+	status = beiscsi_check_fw_rdy(phba);
+	if (status) {
 		beiscsi_log(phba, KERN_WARNING, BEISCSI_LOG_INIT,
 			    "BM_%d : EEH Reset Completed\n");
 	} else {
@@ -5478,7 +5477,7 @@ static pci_ers_result_t beiscsi_eeh_reset(struct pci_dev *pdev)
 
 static void beiscsi_eeh_resume(struct pci_dev *pdev)
 {
-	int ret = 0, i;
+	int ret, i;
 	struct be_eq_obj *pbe_eq;
 	struct beiscsi_hba *phba = NULL;
 	struct hwi_controller *phwi_ctrlr;
@@ -5498,19 +5497,9 @@ static void beiscsi_eeh_resume(struct pci_dev *pdev)
 			phba->num_cpus = 1;
 	}
 
-	ret = beiscsi_cmd_reset_function(phba);
-	if (ret) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BM_%d : Reset Failed\n");
-		goto ret_err;
-	}
-
-	ret = be_chk_reset_complete(phba);
-	if (ret) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BM_%d : Failed to get out of reset.\n");
+	ret = beiscsi_init_sliport(phba);
+	if (ret)
 		goto ret_err;
-	}
 
 	beiscsi_get_params(phba);
 	phba->shost->max_id = phba->params.cxns_per_ctrl;
@@ -5627,28 +5616,15 @@ static int beiscsi_dev_probe(struct pci_dev *pcidev,
 	ret = be_ctrl_init(phba, pcidev);
 	if (ret) {
 		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BM_%d : beiscsi_dev_probe-"
-			    "Failed in be_ctrl_init\n");
+			    "BM_%d : be_ctrl_init failed\n");
 		goto hba_free;
 	}
 
-	set_bit(BEISCSI_HBA_RUNNING, &phba->state);
-	/*
-	 * FUNCTION_RESET should clean up any stale info in FW for this fn
-	 */
-	ret = beiscsi_cmd_reset_function(phba);
-	if (ret) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BM_%d : Reset Failed\n");
-		goto hba_free;
-	}
-	ret = be_chk_reset_complete(phba);
-	if (ret) {
-		beiscsi_log(phba, KERN_ERR, BEISCSI_LOG_INIT,
-			    "BM_%d : Failed to get out of reset.\n");
+	ret = beiscsi_init_sliport(phba);
+	if (ret)
 		goto hba_free;
-	}
 
+	set_bit(BEISCSI_HBA_RUNNING, &phba->state);
 	spin_lock_init(&phba->io_sgl_lock);
 	spin_lock_init(&phba->mgmt_sgl_lock);
 	spin_lock_init(&phba->async_pdu_lock);
@@ -5772,7 +5748,7 @@ static int beiscsi_dev_probe(struct pci_dev *pcidev,
 		irq_poll_disable(&pbe_eq->iopoll);
 	}
 free_twq:
-	beiscsi_clean_port(phba);
+	beiscsi_cleanup_port(phba);
 	beiscsi_free_mem(phba);
 free_port:
 	pci_free_consistent(phba->pcidev,

drivers/scsi/be2iscsi/be_main.h

@@ -82,14 +82,6 @@
 #define BEISCSI_MAX_FRAGS_INIT	192
 #define BE_NUM_MSIX_ENTRIES	1
 
-#define MPU_EP_CONTROL          0
-#define MPU_EP_SEMAPHORE        0xac
-#define BE2_SOFT_RESET          0x5c
-#define BE2_PCI_ONLINE0         0xb0
-#define BE2_PCI_ONLINE1         0xb4
-#define BE2_SET_RESET           0x80
-#define BE2_MPU_IRAM_ONLINE     0x00000080
-
 #define BE_SENSE_INFO_SIZE		258
 #define BE_ISCSI_PDU_HEADER_SIZE	64
 #define BE_MIN_MEM_SIZE			16384