Commit 4db0ba22 authored by Alexandre Belloni's avatar Alexandre Belloni Committed by Nicolas Ferre

ARM: at91: pm: prepare for multiplatform

Split at91_pm_init() in three variants that are called by the respective SoCs
.init_machine. This allows to remove the of_machine_is_compatible() calls and
move at91_pm_init() out of arch_initcall() which is required for multiplatform.
Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: default avatarNicolas Ferre <nicolas.ferre@atmel.com>
parent a63ba411
......@@ -14,6 +14,7 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <asm/setup.h>
......@@ -30,6 +31,15 @@ static void __init at91rm9200_dt_timer_init(void)
at91rm9200_timer_init();
}
static void __init rm9200_dt_device_init(void)
{
at91_rm9200_pm_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *at91rm9200_dt_board_compat[] __initdata = {
"atmel,at91rm9200",
NULL
......@@ -39,5 +49,6 @@ DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200 (Device Tree)")
.init_time = at91rm9200_dt_timer_init,
.map_io = at91_map_io,
.init_early = at91_dt_initialize,
.init_machine = rm9200_dt_device_init,
.dt_compat = at91rm9200_dt_board_compat,
MACHINE_END
......@@ -13,6 +13,7 @@
#include <linux/gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/clk-provider.h>
#include <asm/setup.h>
......@@ -23,6 +24,12 @@
#include "generic.h"
static void __init sam9_dt_device_init(void)
{
at91_sam9260_pm_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *at91_dt_board_compat[] __initdata = {
"atmel,at91sam9",
NULL
......@@ -32,5 +39,25 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_early = at91_dt_initialize,
.init_machine = sam9_dt_device_init,
.dt_compat = at91_dt_board_compat,
MACHINE_END
static void __init sam9g45_dt_device_init(void)
{
at91_sam9g45_pm_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char *at91_9g45_board_compat[] __initconst = {
"atmel,at91sam9g45",
NULL
};
DT_MACHINE_START(at91sam9g45_dt, "Atmel AT91SAM9G45")
/* Maintainer: Atmel */
.map_io = at91_map_io,
.init_early = at91_dt_initialize,
.init_machine = sam9g45_dt_device_init,
.dt_compat = at91_9g45_board_compat,
MACHINE_END
......@@ -28,6 +28,7 @@
static void __init sama5_dt_device_init(void)
{
at91_sam9260_pm_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
......
......@@ -31,4 +31,16 @@ extern void at91sam9_idle(void);
/* Matrix */
extern void at91_ioremap_matrix(u32 base_addr);
#ifdef CONFIG_PM
extern void __init at91_rm9200_pm_init(void);
extern void __init at91_sam9260_pm_init(void);
extern void __init at91_sam9g45_pm_init(void);
#else
void __init at91_rm9200_pm_init(void) { }
void __init at91_sam9260_pm_init(void) { }
void __init at91_sam9g45_pm_init(void) { }
#endif
#endif /* _AT91_GENERIC_H */
......@@ -266,7 +266,7 @@ static void __init at91_pm_sram_init(void)
#endif
static int __init at91_pm_init(void)
static void __init at91_pm_init(void)
{
#ifdef CONFIG_AT91_SLOW_CLOCK
at91_pm_sram_init();
......@@ -274,29 +274,35 @@ static int __init at91_pm_init(void)
pr_info("AT91: Power Management%s\n", (slow_clock ? " (with slow clock mode)" : ""));
at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
if (of_machine_is_compatible("atmel,at91rm9200")) {
/*
* AT91RM9200 SDRAM low-power mode cannot be used with
* self-refresh.
*/
at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP |
AT91RM9200_PMC_UDP;
at91_pm_data.memctrl = AT91_MEMCTRL_MC;
} else if (of_machine_is_compatible("atmel,at91sam9g45")) {
at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP;
at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
}
if (at91_cpuidle_device.dev.platform_data)
platform_device_register(&at91_cpuidle_device);
suspend_set_ops(&at91_pm_ops);
}
return 0;
void __init at91_rm9200_pm_init(void)
{
/*
* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
*/
at91_ramc_write(0, AT91RM9200_SDRAMC_LPR, 0);
at91_pm_data.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP;
at91_pm_data.memctrl = AT91_MEMCTRL_MC;
at91_pm_init();
}
void __init at91_sam9260_pm_init(void)
{
at91_pm_data.memctrl = AT91_MEMCTRL_SDRAMC;
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP;
return at91_pm_init();
}
void __init at91_sam9g45_pm_init(void)
{
at91_pm_data.uhp_udp_mask = AT91SAM926x_PMC_UHP;
at91_pm_data.memctrl = AT91_MEMCTRL_DDRSDR;
return at91_pm_init();
}
arch_initcall(at91_pm_init);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment