Skip to content

L
linux
Commit 4dbe55c9 authored by Krishna Manikandan's avatar Krishna Manikandan Committed by Rob Clark
Browse files
Options

dt-bindings: msm: dsi: add yaml schemas for DSI bindings 

Add YAML schema for the device tree bindings for DSI
Signed-off-by: default avatarKrishna Manikandan <mkrishn@codeaurora.org>
Reviewed-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: default avatarStephen Boyd <swboyd@chromium.org>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1621856653-10649-2-git-send-email-mkrishn@codeaurora.orgSigned-off-by: default avatarRob Clark <robdclark@chromium.org>
parent 3d7a0dd8
Hide whitespace changes
Inline Side-by-side
Showing with 185 additions and 249 deletions
Documentation/devicetree/bindings/display/msm/dsi-controller-main.yaml 0 → 100644
View file @ 4dbe55c9
# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: Qualcomm Display DSI controller
maintainers:
- Krishna Manikandan <mkrishn@codeaurora.org>
allOf:
- $ref: "../dsi-controller.yaml#"
properties:
compatible:
items:
- const: qcom,mdss-dsi-ctrl
reg:
maxItems: 1
reg-names:
const: dsi_ctrl
interrupts:
maxItems: 1
clocks:
items:
- description: Display byte clock
- description: Display byte interface clock
- description: Display pixel clock
- description: Display escape clock
- description: Display AHB clock
- description: Display AXI clock
clock-names:
items:
- const: byte
- const: byte_intf
- const: pixel
- const: core
- const: iface
- const: bus
phys:
maxItems: 1
phy-names:
const: dsi
"#address-cells": true
"#size-cells": true
syscon-sfpb:
description: A phandle to mmss_sfpb syscon node (only for DSIv2).
$ref: "/schemas/types.yaml#/definitions/phandle"
qcom,dual-dsi-mode:
type: boolean
description: |
Indicates if the DSI controller is driving a panel which needs
2 DSI links.
power-domains:
maxItems: 1
operating-points-v2: true
ports:
$ref: "/schemas/graph.yaml#/properties/ports"
description: |
Contains DSI controller input and output ports as children, each
containing one endpoint subnode.
properties:
port@0:
$ref: "/schemas/graph.yaml#/properties/port"
description: |
Input endpoints of the controller.
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
maxItems: 4
minItems: 4
items:
enum: [ 0, 1, 2, 3 ]
port@1:
$ref: "/schemas/graph.yaml#/properties/port"
description: |
Output endpoints of the controller.
properties:
endpoint:
$ref: /schemas/media/video-interfaces.yaml#
unevaluatedProperties: false
properties:
data-lanes:
maxItems: 4
minItems: 4
items:
enum: [ 0, 1, 2, 3 ]
required:
- port@0
- port@1
required:
- compatible
- reg
- reg-names
- interrupts
- clocks
- clock-names
- phys
- phy-names
- power-domains
- operating-points-v2
- ports
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,dispcc-sdm845.h>
#include <dt-bindings/clock/qcom,gcc-sdm845.h>
#include <dt-bindings/power/qcom-rpmpd.h>
dsi@ae94000 {
compatible = "qcom,mdss-dsi-ctrl";
reg = <0x0ae94000 0x400>;
reg-names = "dsi_ctrl";
#address-cells = <1>;
#size-cells = <0>;
interrupt-parent = <&mdss>;
interrupts = <4>;
clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK>,
<&dispcc DISP_CC_MDSS_BYTE0_INTF_CLK>,
<&dispcc DISP_CC_MDSS_PCLK0_CLK>,
<&dispcc DISP_CC_MDSS_ESC0_CLK>,
<&dispcc DISP_CC_MDSS_AHB_CLK>,
<&dispcc DISP_CC_MDSS_AXI_CLK>;
clock-names = "byte",
"byte_intf",
"pixel",
"core",
"iface",
"bus";
phys = <&dsi0_phy>;
phy-names = "dsi";
power-domains = <&rpmhpd SC7180_CX>;
operating-points-v2 = <&dsi_opp_table>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&dpu_intf1_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&sn65dsi86_in>;
data-lanes = <0 1 2 3>;
};
};
};
};
...
Documentation/devicetree/bindings/display/msm/dsi.txt deleted 100644 → 0
View file @ 3d7a0dd8
Qualcomm Technologies Inc. adreno/snapdragon DSI output
DSI Controller:
Required properties:
- compatible:
* "qcom,mdss-dsi-ctrl"
- reg: Physical base address and length of the registers of controller
- reg-names: The names of register regions. The following regions are required:
* "dsi_ctrl"
- interrupts: The interrupt signal from the DSI block.
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks.
- clock-names: the following clocks are required:
* "mdp_core"
* "iface"
* "bus"
* "core_mmss"
* "byte"
* "pixel"
* "core"
For DSIv2, we need an additional clock:
* "src"
For DSI6G v2.0 onwards, we need also need the clock:
* "byte_intf"
- assigned-clocks: Parents of "byte" and "pixel" for the given platform.
- assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided
by a DSI PHY block. See [1] for details on clock bindings.
- vdd-supply: phandle to vdd regulator device node
- vddio-supply: phandle to vdd-io regulator device node
- vdda-supply: phandle to vdda regulator device node
- phys: phandle to DSI PHY device node
- phy-names: the name of the corresponding PHY device
- syscon-sfpb: A phandle to mmss_sfpb syscon node (only for DSIv2)
- ports: Contains 2 DSI controller ports as child nodes. Each port contains
an endpoint subnode as defined in [2] and [3].
Optional properties:
- panel@0: Node of panel connected to this DSI controller.
See files in [4] for each supported panel.
- qcom,dual-dsi-mode: Boolean value indicating if the DSI controller is
driving a panel which needs 2 DSI links.
- qcom,master-dsi: Boolean value indicating if the DSI controller is driving
the master link of the 2-DSI panel.
- qcom,sync-dual-dsi: Boolean value indicating if the DSI controller is
driving a 2-DSI panel whose 2 links need receive command simultaneously.
- pinctrl-names: the pin control state names; should contain "default"
- pinctrl-0: the default pinctrl state (active)
- pinctrl-n: the "sleep" pinctrl state
- ports: contains DSI controller input and output ports as children, each
containing one endpoint subnode.
DSI Endpoint properties:
- remote-endpoint: For port@0, set to phandle of the connected panel/bridge's
input endpoint. For port@1, set to the MDP interface output. See [2] for
device graph info.
- data-lanes: this describes how the physical DSI data lanes are mapped
to the logical lanes on the given platform. The value contained in
index n describes what physical lane is mapped to the logical lane n
(DATAn, where n lies between 0 and 3). The clock lane position is fixed
and can't be changed. Hence, they aren't a part of the DT bindings. See
[3] for more info on the data-lanes property.
For example:
data-lanes = <3 0 1 2>;
The above mapping describes that the logical data lane DATA0 is mapped to
the physical data lane DATA3, logical DATA1 to physical DATA0, logic DATA2
to phys DATA1 and logic DATA3 to phys DATA2.
There are only a limited number of physical to logical mappings possible:
<0 1 2 3>
<1 2 3 0>
<2 3 0 1>
<3 0 1 2>
<0 3 2 1>
<1 0 3 2>
<2 1 0 3>
<3 2 1 0>
DSI PHY:
Required properties:
- compatible: Could be the following
* "qcom,dsi-phy-28nm-hpm"
* "qcom,dsi-phy-28nm-lp"
* "qcom,dsi-phy-20nm"
* "qcom,dsi-phy-28nm-8960"
* "qcom,dsi-phy-14nm"
* "qcom,dsi-phy-14nm-660"
* "qcom,dsi-phy-10nm"
* "qcom,dsi-phy-10nm-8998"
* "qcom,dsi-phy-7nm"
* "qcom,dsi-phy-7nm-8150"
- reg: Physical base address and length of the registers of PLL, PHY. Some
revisions require the PHY regulator base address, whereas others require the
PHY lane base address. See below for each PHY revision.
- reg-names: The names of register regions. The following regions are required:
For DSI 28nm HPM/LP/8960 PHYs and 20nm PHY:
* "dsi_pll"
* "dsi_phy"
* "dsi_phy_regulator"
For DSI 14nm, 10nm and 7nm PHYs:
* "dsi_pll"
* "dsi_phy"
* "dsi_phy_lane"
- clock-cells: Must be 1. The DSI PHY block acts as a clock provider, creating
2 clocks: A byte clock (index 0), and a pixel clock (index 1).
- power-domains: Should be <&mmcc MDSS_GDSC>.
- clocks: Phandles to device clocks. See [1] for details on clock bindings.
- clock-names: the following clocks are required:
* "iface"
* "ref" (only required for new DTS files/entries)
For 28nm HPM/LP, 28nm 8960 PHYs:
- vddio-supply: phandle to vdd-io regulator device node
For 20nm PHY:
- vddio-supply: phandle to vdd-io regulator device node
- vcca-supply: phandle to vcca regulator device node
For 14nm PHY:
- vcca-supply: phandle to vcca regulator device node
For 10nm and 7nm PHY:
- vdds-supply: phandle to vdds regulator device node
Optional properties:
- qcom,dsi-phy-regulator-ldo-mode: Boolean value indicating if the LDO mode PHY
regulator is wanted.
- qcom,mdss-mdp-transfer-time-us: Specifies the dsi transfer time for command mode
panels in microseconds. Driver uses this number to adjust
the clock rate according to the expected transfer time.
Increasing this value would slow down the mdp processing
and can result in slower performance.
Decreasing this value can speed up the mdp processing,
but this can also impact power consumption.
As a rule this time should not be higher than the time
that would be expected with the processing at the
dsi link rate since anyways this would be the maximum
transfer time that could be achieved.
If ping pong split is enabled, this time should not be higher
than two times the dsi link rate time.
If the property is not specified, then the default value is 14000 us.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/graph.txt
[3] Documentation/devicetree/bindings/media/video-interfaces.txt
[4] Documentation/devicetree/bindings/display/panel/
Example:
dsi0: dsi@fd922800 {
compatible = "qcom,mdss-dsi-ctrl";
qcom,dsi-host-index = <0>;
interrupt-parent = <&mdp>;
interrupts = <4 0>;
reg-names = "dsi_ctrl";
reg = <0xfd922800 0x200>;
power-domains = <&mmcc MDSS_GDSC>;
clock-names =
"bus",
"byte",
"core",
"core_mmss",
"iface",
"mdp_core",
"pixel";
clocks =
<&mmcc MDSS_AXI_CLK>,
<&mmcc MDSS_BYTE0_CLK>,
<&mmcc MDSS_ESC0_CLK>,
<&mmcc MMSS_MISC_AHB_CLK>,
<&mmcc MDSS_AHB_CLK>,
<&mmcc MDSS_MDP_CLK>,
<&mmcc MDSS_PCLK0_CLK>;
assigned-clocks =
<&mmcc BYTE0_CLK_SRC>,
<&mmcc PCLK0_CLK_SRC>;
assigned-clock-parents =
<&dsi_phy0 0>,
<&dsi_phy0 1>;
vdda-supply = <&pma8084_l2>;
vdd-supply = <&pma8084_l22>;
vddio-supply = <&pma8084_l12>;
phys = <&dsi_phy0>;
phy-names ="dsi-phy";
qcom,dual-dsi-mode;
qcom,master-dsi;
qcom,sync-dual-dsi;
qcom,mdss-mdp-transfer-time-us = <12000>;
pinctrl-names = "default", "sleep";
pinctrl-0 = <&dsi_active>;
pinctrl-1 = <&dsi_suspend>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
dsi0_in: endpoint {
remote-endpoint = <&mdp_intf1_out>;
};
};
port@1 {
reg = <1>;
dsi0_out: endpoint {
remote-endpoint = <&panel_in>;
data-lanes = <0 1 2 3>;
};
};
};
panel: panel@0 {
compatible = "sharp,lq101r1sx01";
reg = <0>;
link2 = <&secondary>;
power-supply = <...>;
backlight = <...>;
port {
panel_in: endpoint {
remote-endpoint = <&dsi0_out>;
};
};
};
};
dsi_phy0: dsi-phy@fd922a00 {
compatible = "qcom,dsi-phy-28nm-hpm";
qcom,dsi-phy-index = <0>;
reg-names =
"dsi_pll",
"dsi_phy",
"dsi_phy_regulator";
reg = <0xfd922a00 0xd4>,
<0xfd922b00 0x2b0>,
<0xfd922d80 0x7b>;
clock-names = "iface";
clocks = <&mmcc MDSS_AHB_CLK>;
#clock-cells = <1>;
vddio-supply = <&pma8084_l12>;
qcom,dsi-phy-regulator-ldo-mode;
};
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7