Merge branch 'brcm-omega'

Arun Parameswaran says:

====================
Add Broadcom Omega SoC internal switch and phy

The patchset is based on David Miller's "net-next" repo.

The patches add support for the Broadcom Omega SoC's internal ethernet
switch and the internal gphy.

The internal ethernet switch in the Omega is a b53 srab based switch.
The support for the switch is added to the b53 driver in the dsa
framework.

The gphy support is added to the bcm7xxx driver.
====================
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation/devicetree/bindings/net/dsa/b53.txt

@@ -24,6 +24,14 @@ Required properties:
       "brcm,bcm53018-srab"
       "brcm,bcm53019-srab" and the mandatory "brcm,bcm5301x-srab" string
 
+  For the BCM5831X/BCM1140x SoCs with an integrated switch, must be one of:
+      "brcm,bcm11404-srab"
+      "brcm,bcm11407-srab"
+      "brcm,bcm11409-srab"
+      "brcm,bcm58310-srab"
+      "brcm,bcm58311-srab"
+      "brcm,bcm58313-srab" and the mandatory "brcm,omega-srab" string
+
   For the BCM585xx/586XX/88312 SoCs with an integrated switch, must be one of:
       "brcm,bcm58522-srab"
       "brcm,bcm58523-srab"

drivers/net/dsa/b53/b53_srab.c

@@ -374,6 +374,7 @@ static const struct of_device_id b53_srab_of_match[] = {
 	{ .compatible = "brcm,bcm88312-srab", .data = (void *)BCM58XX_DEVICE_ID },
 	{ .compatible = "brcm,cygnus-srab", .data = (void *)BCM583XX_DEVICE_ID },
 	{ .compatible = "brcm,nsp-srab", .data = (void *)BCM58XX_DEVICE_ID },
+	{ .compatible = "brcm,omega-srab", .data = (void *)BCM583XX_DEVICE_ID },
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, b53_srab_of_match);

drivers/net/phy/bcm7xxx.c

@@ -229,6 +229,7 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
 	phy_read(phydev, MII_BMSR);
 
 	switch (rev) {
+	case 0xa0:
 	case 0xb0:
 		ret = bcm7xxx_28nm_b0_afe_config_init(phydev);
 		break;
@@ -659,6 +660,7 @@ static struct phy_driver bcm7xxx_driver[] = {
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439, "Broadcom BCM7439"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7439_2, "Broadcom BCM7439 (2)"),
 	BCM7XXX_28NM_GPHY(PHY_ID_BCM7445, "Broadcom BCM7445"),
+	BCM7XXX_28NM_GPHY(PHY_ID_BCM_OMEGA, "Broadcom Omega Combo GPHY"),
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7346, "Broadcom BCM7346"),
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7362, "Broadcom BCM7362"),
 	BCM7XXX_40NM_EPHY(PHY_ID_BCM7425, "Broadcom BCM7425"),

include/linux/brcmphy.h

@@ -45,6 +45,7 @@
 #define PHY_ID_BCM7445			0x600d8510
 
 #define PHY_ID_BCM_CYGNUS		0xae025200
+#define PHY_ID_BCM_OMEGA		0xae025100
 
 #define PHY_BCM_OUI_MASK		0xfffffc00
 #define PHY_BCM_OUI_1			0x00206000