Commit 4e3fe1cb authored by Zheng Yang's avatar Zheng Yang Committed by Kishon Vijay Abraham I

dt-bindings: add binding for Rockchip hdmi phy using an Innosilicon IP

The phy is used so far in two Rockchip socs the rk3228 and the rk3328.
Signed-off-by: default avatarZheng Yang <zhengyang@rock-chips.com>
Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
parent 9be08a27
ROCKCHIP HDMI PHY WITH INNO IP BLOCK
Required properties:
- compatible : should be one of the listed compatibles:
* "rockchip,rk3228-hdmi-phy",
* "rockchip,rk3328-hdmi-phy";
- reg : Address and length of the hdmi phy control register set
- clocks : phandle + clock specifier for the phy clocks
- clock-names : string, clock name, must contain "sysclk" for system
control and register configuration, "refoclk" for crystal-
oscillator reference PLL clock input and "refpclk" for pclk-
based refeference PLL clock input.
- #clock-cells: should be 0.
- clock-output-names : shall be the name for the output clock.
- interrupts : phandle + interrupt specified for the hdmiphy interrupt
- #phy-cells : must be 0. See ./phy-bindings.txt for details.
Optional properties for rk3328-hdmi-phy:
- nvmem-cells = phandle + nvmem specifier for the cpu-version efuse
- nvmem-cell-names : "cpu-version" to read the chip version, required
for adjustment to some frequency settings
Example:
hdmi_phy: hdmi-phy@12030000 {
compatible = "rockchip,rk3228-hdmi-phy";
reg = <0x12030000 0x10000>;
#phy-cells = <0>;
clocks = <&cru PCLK_HDMI_PHY>, <&xin24m>, <&cru DCLK_HDMIPHY>;
clock-names = "sysclk", "refoclk", "refpclk";
#clock-cells = <0>;
clock-output-names = "hdmi_phy";
status = "disabled";
};
Then the PHY can be used in other nodes such as:
hdmi: hdmi@200a0000 {
compatible = "rockchip,rk3228-dw-hdmi";
...
phys = <&hdmi_phy>;
phy-names = "hdmi";
...
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment