Import 2.3.13pre4

Makefile

@@ -110,7 +110,7 @@ CORE_FILES	=kernel/kernel.o mm/mm.o fs/fs.o ipc/ipc.o
 FILESYSTEMS	=fs/filesystems.a
 NETWORKS	=net/network.a
 DRIVERS		=drivers/block/block.a \
-		 drivers/char/char.a \
+		 drivers/char/char.o \
 	         drivers/parport/parport.a
 LIBS		=$(TOPDIR)/lib/lib.a
 SUBDIRS		=kernel drivers mm fs net ipc lib

arch/i386/config.in

@@ -94,8 +94,8 @@ tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
 
 source drivers/parport/Config.in
 
-bool 'Advanced Power Management BIOS support' CONFIG_APM
-if [ "$CONFIG_APM" = "y" ]; then
+tristate 'Advanced Power Management BIOS support' CONFIG_APM
+if [ "$CONFIG_APM" != "n" ]; then
   bool '   Ignore USER SUSPEND' CONFIG_APM_IGNORE_USER_SUSPEND
   bool '   Enable PM at boot time' CONFIG_APM_DO_ENABLE
   bool '   Make CPU Idle calls when idle' CONFIG_APM_CPU_IDLE

arch/i386/kernel/Makefile

@@ -34,8 +34,12 @@ else
   endif
 endif
 
-ifdef CONFIG_APM
+ifeq ($(CONFIG_APM),y)
 OX_OBJS += apm.o
+else
+  ifeq ($(CONFIG_APM),m)
+  MX_OBJS += apm.o
+  endif
 endif
 
 ifdef CONFIG_SMP

arch/i386/kernel/apm.c

@@ -1428,7 +1428,7 @@ static int apm(void *unused)
  * In short, if something bad happens, at least we have a choice
  * of just killing the apm thread..
  */
-void __init apm_init(void)
+static int __init apm_init(void)
 {
 	static struct proc_dir_entry *ent;
 
@@ -1533,3 +1533,5 @@ void __init apm_init(void)
 
 	kernel_thread(apm, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGHAND | SIGCHLD);
 }
+
+module_init(apm_init)

arch/i386/kernel/init_task.c

 #include <linux/mm.h>
 #include <linux/sched.h>
+#include <linux/init.h>
 
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/desc.h>
-#include <asm/init.h>
 
 static struct vm_area_struct init_mmap = INIT_MMAP;
 static struct fs_struct init_fs = INIT_FS;

arch/i386/kernel/io_apic.c

@@ -242,7 +242,7 @@ static void clear_IO_APIC (void)
 int pirq_entries [MAX_PIRQS];
 int pirqs_enabled;
 
-static void __init ioapic_setup(char *str, int *ints)
+static int __init ioapic_setup(char *str)
 {
 	extern int skip_ioapic_setup;	/* defined in arch/i386/kernel/smp.c */
 
@@ -252,7 +252,7 @@ static void __init ioapic_setup(char *str, int *ints)
 
 __setup("noapic", ioapic_setup);
 
-static void __init ioapic_pirq_setup(char *str)
+static int __init ioapic_pirq_setup(char *str)
 {
 	int i, max;
 	int ints[11];
@@ -275,6 +275,7 @@ static void __init ioapic_pirq_setup(char *str)
 		 */
 		pirq_entries[MAX_PIRQS-i-1] = ints[i+1];
 	}
+	return 1;
 }
 
 __setup("pirq=", ioapic_pirq_setup);

arch/i386/kernel/ldt.c

@@ -98,8 +98,9 @@ static int write_ldt(void * ptr, unsigned long bytecount, int oldmode)
 			printk(KERN_WARNING "LDT allocated for cloned task!\n");
 		/*
 		 * Possibly do an SMP cross-call to other CPUs to reload
-		 * their LDTs
+		 * their LDTs?
 		 */
+		load_LDT(mm);
 	}
 
 	lp = (__u32 *) ((ldt_info.entry_number << 3) + (char *) mm->segments);

arch/i386/kernel/smp.c

@@ -1634,7 +1634,10 @@ static void flush_tlb_others(unsigned int cpumask)
 			 * Take care of "crossing" invalidates
 			 */
 			if (test_bit(cpu, &smp_invalidate_needed)) {
+				struct mm_struct *mm = current->mm;
 				clear_bit(cpu, &smp_invalidate_needed);
+				if (mm)
+					atomic_set_mask(1 << cpu, &mm->cpu_vm_mask);
 				local_flush_tlb();
 			}
 			--stuck;

arch/sparc/mm/asyncd.c

@@ -271,3 +271,14 @@ int asyncd(void *unused)
 	}
 }
 
+#if CONFIG_AP1000
+
+static int __init init_ap1000(void)
+{
+	kernel_thread(asyncd, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGHAND);
+	return 0;
+}
+
+module_init(init_ap1000)
+
+#endif

drivers/char/msbusmouse.c

@@ -151,16 +151,11 @@ __initfunc(int ms_bus_mouse_init(void))
 	return msedev < 0 ? msedev : 0;
 }
 
-#ifdef MODULE
-int init_module(void)
-{
-	return ms_bus_mouse_init();
-}
-
-void cleanup_module(void)
+void ms_bus_mouse_exit(void)
 {
 	unregister_busmouse(msedev);
 	release_region(MS_MSE_CONTROL_PORT, 0x04);
 }
-#endif
 
+module_init(ms_bus_mouse_init)
+module_exit(ms_bus_mouse_exit)

drivers/sound/es1370.c

@@ -101,6 +101,8 @@
  *    15.06.99   0.23  Fix bad allocation bug.
  *                     Thanks to Deti Fliegl <fliegl@in.tum.de>
  *    28.06.99   0.24  Add pci_set_master
+ *    02.08.99   0.25  Added workaround for the "phantom write" bug first
+ *                     documented by Dave Sharpless from Anchor Games
  *
  * some important things missing in Ensoniq documentation:
  *
@@ -175,12 +177,14 @@
 #define ES1370_REG_DAC2_SCOUNT    0x28
 #define ES1370_REG_ADC_SCOUNT     0x2c
 
-#define ES1370_REG_DAC1_FRAMEADR  0xc30
-#define ES1370_REG_DAC1_FRAMECNT  0xc34
-#define ES1370_REG_DAC2_FRAMEADR  0xc38
-#define ES1370_REG_DAC2_FRAMECNT  0xc3c
-#define ES1370_REG_ADC_FRAMEADR   0xd30
-#define ES1370_REG_ADC_FRAMECNT   0xd34
+#define ES1370_REG_DAC1_FRAMEADR    0xc30
+#define ES1370_REG_DAC1_FRAMECNT    0xc34
+#define ES1370_REG_DAC2_FRAMEADR    0xc38
+#define ES1370_REG_DAC2_FRAMECNT    0xc3c
+#define ES1370_REG_ADC_FRAMEADR     0xd30
+#define ES1370_REG_ADC_FRAMECNT     0xd34
+#define ES1370_REG_PHANTOM_FRAMEADR 0xd38
+#define ES1370_REG_PHANTOM_FRAMECNT 0xd3c
 
 #define ES1370_FMT_U8_MONO     0
 #define ES1370_FMT_U8_STEREO   1
@@ -360,6 +364,13 @@ struct es1370_state {
 
 static struct es1370_state *devs = NULL;
 
+/*
+ * The following buffer is used to point the phantom write channel to,
+ * so that it cannot wreak havoc. The attribute makes sure it doesn't
+ * cross a page boundary and ensures dword alignment for the DMA engine
+ */
+static unsigned char bugbuf[16] __attribute__ ((aligned (16)));
+
 /* --------------------------------------------------------------------- */
 
 extern inline unsigned ld2(unsigned int x)
@@ -2321,7 +2332,7 @@ int __init init_es1370(void)
 
 	if (!pci_present())   /* No PCI bus in this machine! */
 		return -ENODEV;
-	printk(KERN_INFO "es1370: version v0.24 time " __TIME__ " " __DATE__ "\n");
+	printk(KERN_INFO "es1370: version v0.25 time " __TIME__ " " __DATE__ "\n");
 	while (index < NR_DEVICE && 
 	       (pcidev = pci_find_device(PCI_VENDOR_ID_ENSONIQ, PCI_DEVICE_ID_ENSONIQ_ES1370, pcidev))) {
 		if (pcidev->base_address[0] == 0 || 
@@ -2385,6 +2396,10 @@ int __init init_es1370(void)
 		/* initialize the chips */
 		outl(s->ctrl, s->io+ES1370_REG_CONTROL);
 		outl(s->sctrl, s->io+ES1370_REG_SERIAL_CONTROL);
+		/* point phantom write channel to "bugbuf" */
+		outl((ES1370_REG_PHANTOM_FRAMEADR >> 8) & 15, s->io+ES1370_REG_MEMPAGE);
+		outl(virt_to_bus(bugbuf), s->io+(ES1370_REG_PHANTOM_FRAMEADR & 0xff));
+		outl(0, s->io+(ES1370_REG_PHANTOM_FRAMECNT & 0xff));
 		pci_set_master(pcidev);  /* enable bus mastering */
 		wrcodec(s, 0x16, 3); /* no RST, PD */
 		wrcodec(s, 0x17, 0); /* CODEC ADC and CODEC DAC use {LR,B}CLK2 and run off the LRCLK2 PLL; program DAC_SYNC=0!!  */

fs/binfmt_aout.c

@@ -36,13 +36,7 @@ static int aout_core_dump(long signr, struct pt_regs * regs, struct file *file);
 extern void dump_thread(struct pt_regs *, struct user *);
 
 static struct linux_binfmt aout_format = {
-	NULL,
-#ifndef MODULE
-	NULL,
-#else
-	&__this_module,
-#endif
-	load_aout_binary, load_aout_library, aout_core_dump, PAGE_SIZE
+	NULL, THIS_MODULE, load_aout_binary, load_aout_library, aout_core_dump, PAGE_SIZE
 };
 
 static void set_brk(unsigned long start, unsigned long end)
@@ -564,14 +558,10 @@ static int __init init_aout_binfmt(void)
 	return register_binfmt(&aout_format);
 }
 
-__initcall(init_aout_binfmt);
-
-#ifdef MODULE
-int init_module(void) {
-	return init_aout_binfmt();
-}
-
-void cleanup_module( void) {
+static void __exit exit_aout_binfmt(void)
+{
 	unregister_binfmt(&aout_format);
 }
-#endif
+
+module_init(init_aout_binfmt)
+module_exit(exit_aout_binfmt)

fs/binfmt_elf.c

@@ -64,13 +64,7 @@ static int elf_core_dump(long signr, struct pt_regs * regs, struct file * file);
 #define ELF_PAGEALIGN(_v) (((_v) + ELF_EXEC_PAGESIZE - 1) & ~(ELF_EXEC_PAGESIZE - 1))
 
 static struct linux_binfmt elf_format = {
-	NULL,
-#ifndef MODULE
-	NULL,
-#else
-	&__this_module,
-#endif
-	load_elf_binary, load_elf_library, elf_core_dump, ELF_EXEC_PAGESIZE
+	NULL, THIS_MODULE, load_elf_binary, load_elf_library, elf_core_dump, ELF_EXEC_PAGESIZE
 };
 
 static void set_brk(unsigned long start, unsigned long end)
@@ -1301,23 +1295,11 @@ static int __init init_elf_binfmt(void)
 	return register_binfmt(&elf_format);
 }
 
-__initcall(init_elf_binfmt);
-
-#ifdef MODULE
-
-int init_module(void)
-{
-	/* Install the COFF, ELF and XOUT loaders.
-	 * N.B. We *rely* on the table being the right size with the
-	 * right number of free slots...
-	 */
-	return init_elf_binfmt();
-}
-
-
-void cleanup_module( void)
+static void __exit exit_elf_binfmt(void)
 {
 	/* Remove the COFF and ELF loaders. */
 	unregister_binfmt(&elf_format);
 }
-#endif
+
+module_init(init_elf_binfmt)
+module_exit(exit_elf_binfmt)

fs/binfmt_em86.c

@@ -105,13 +105,7 @@ static int load_em86(struct linux_binprm *bprm,struct pt_regs *regs)
 }
 
 struct linux_binfmt em86_format = {
-	NULL,
-#ifndef MODULE
-	NULL,
-#else
-	&__this_module,
-#endif
-	load_em86, NULL, NULL, 0
+	NULL, THIS_MODULE, load_em86, NULL, NULL, 0
 };
 
 static int __init init_em86_binfmt(void)
@@ -119,15 +113,10 @@ static int __init init_em86_binfmt(void)
 	return register_binfmt(&em86_format);
 }
 
-__initcall(init_em86_binfmt);
-
-#ifdef MODULE
-int init_module(void)
+static void __exit exit_em86_binfmt(void)
 {
-	return init_em86_binfmt();
-}
-
-void cleanup_module( void) {
 	unregister_binfmt(&em86_format);
 }
-#endif
+
+module_init(init_em86_binfmt)
+module_exit(exit_em86_binfmt)

fs/binfmt_misc.c

@@ -64,13 +64,7 @@ static void entry_proc_cleanup(struct binfmt_entry *e);
 static int entry_proc_setup(struct binfmt_entry *e);
 
 static struct linux_binfmt misc_format = {
-	NULL,
-#ifndef MODULE
-	NULL,
-#else
-	&__this_module,
-#endif
-	load_misc_binary, NULL, NULL, 0
+	NULL, THIS_MODULE, load_misc_binary, NULL, NULL, 0
 };
 
 static struct proc_dir_entry *bm_dir = NULL;
@@ -530,16 +524,7 @@ static int __init init_misc_binfmt(void)
 	goto out;
 }
 
-__initcall(init_misc_binfmt);
-
-#ifdef MODULE
-EXPORT_NO_SYMBOLS;
-int init_module(void)
-{
-	return init_misc_binfmt();
-}
-
-void cleanup_module(void)
+static void __exit exit_misc_binfmt(void)
 {
 	unregister_binfmt(&misc_format);
 	remove_proc_entry("register", bm_dir);
@@ -547,5 +532,8 @@ void cleanup_module(void)
 	clear_entries();
 	remove_proc_entry("sys/fs/binfmt_misc", NULL);
 }
-#endif
-#undef VERBOSE_STATUS
+
+EXPORT_NO_SYMBOLS;
+
+module_init(init_misc_binfmt)
+module_exit(exit_misc_binfmt)

fs/binfmt_script.c

@@ -101,13 +101,7 @@ static int load_script(struct linux_binprm *bprm,struct pt_regs *regs)
 }
 
 struct linux_binfmt script_format = {
-	NULL,
-#ifndef MODULE
-	NULL,
-#else
-	&__this_module,
-#endif
-	load_script, NULL, NULL, 0
+	NULL, THIS_MODULE, load_script, NULL, NULL, 0
 };
 
 static int __init init_script_binfmt(void)
@@ -115,15 +109,10 @@ static int __init init_script_binfmt(void)
 	return register_binfmt(&script_format);
 }
 
-__initcall(init_script_binfmt);
-
-#ifdef MODULE
-int init_module(void)
+static void __exit exit_script_binfmt(void)
 {
-	return init_script_binfmt();
-}
-
-void cleanup_module( void) {
 	unregister_binfmt(&script_format);
 }
-#endif
+
+module_init(init_script_binfmt)
+module_exit(exit_script_binfmt)

fs/buffer.c

@@ -2319,3 +2319,12 @@ int bdflush(void * unused)
 		}
 	}
 }
+
+static int __init bdflush_init(void)
+{
+	kernel_thread(bdflush, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGHAND);
+	return 0;
+}
+
+module_init(bdflush_init)
+

include/asm-i386/init.h

-#ifndef _I386_INIT_H
-#define _I386_INIT_H
-
-typedef int (*initcall_t)(void);
-
-extern initcall_t __initcall_start, __initcall_end;
-
-struct kernel_param {
-	const char *str;
-	int (*setup_func)(char *);
-};
-
-extern struct kernel_param __setup_start, __setup_end;
-
-/* Used for initialization calls.. */
-#define __initcall(fn)	\
-	static __attribute__ ((unused,__section__ (".initcall.init"))) initcall_t __initcall_##fn = fn
-
-/* Used for kernel command line parameter setup */
-#define __setup(str, fn) \
-	static __attribute__ ((unused,__section__ (".setup.init"))) struct kernel_param __setup_##fn = { str, fn }
-
-
-#define __init __attribute__ ((__section__ (".text.init")))
-#define __initdata __attribute__ ((__section__ (".data.init")))
-#define __initfunc(__arginit) \
-	__arginit __init; \
-	__arginit
-/* For assembly routines */
-#define __INIT		.section	".text.init",#alloc,#execinstr
-#define __FINIT	.previous
-#define __INITDATA	.section	".data.init",#alloc,#write
-
-#define __cacheline_aligned __attribute__ \
-			 ((__section__ (".data.cacheline_aligned")))
-
-#endif
+#error "<asm/init.h> should never be used - use <linux/init.h> instead"

include/linux/init.h

@@ -48,15 +48,74 @@
  */
 
 #ifndef MODULE
-#include <asm/init.h>
+
+/*
+ * Used for initialization calls..
+ */
+typedef int (*initcall_t)(void);
+
+extern initcall_t __initcall_start, __initcall_end;
+
+#define __initcall(fn)								\
+	static __attribute__ ((unused,__section__ (".initcall.init")))		\
+		initcall_t __initcall_##fn = fn
+
+/*
+ * Used for kernel command line parameter setup
+ */
+struct kernel_param {
+	const char *str;
+	int (*setup_func)(char *);
+};
+
+extern struct kernel_param __setup_start, __setup_end;
+
+#define __setup(str, fn)							\
+	static __attribute__ ((__section__ (".data.init")))			\
+		char __setup_str_##fn[] = str;					\
+	static __attribute__ ((unused,__section__ (".setup.init")))		\
+		struct kernel_param __setup_##fn = { __setup_str_##fn, fn }
+
+/*
+ * Mark functions and data as being only used at initialization
+ * or exit time.
+ */
+#define __init __attribute__ ((__section__ (".text.init")))
+#define __exit __attribute__ ((unused, __section__(".text.init")))
+#define __initdata __attribute__ ((__section__ (".data.init")))
+#define __exitdata __attribute__ ((unused, __section__ (".data.init")))
+
+#define __initfunc(__arginit) \
+	__arginit __init; \
+	__arginit
+
+/* For assembly routines */
+#define __INIT		.section	".text.init","ax"
+#define __FINIT		.previous
+#define __INITDATA	.section	".data.init","aw"
+
+#define __cacheline_aligned __attribute__ \
+			 ((__section__ (".data.cacheline_aligned")))
+
+#define module_init(x)	__initcall(x);
+#define module_exit(x)	/* nothing */
+
 #else
+
 #define __init
+#define __exit
 #define __initdata
+#define __exitdata
 #define __initfunc(__arginit) __arginit
+#defint __initcall
 /* For assembly routines */
 #define __INIT
 #define __FINIT
 #define __INITDATA
+
+#define module_init(x)	int init_module(void) { return x(); }
+#define module_exit(x)	void cleanup_module(void) { x(); }
+
 #endif
 
 #if __GNUC__ >= 2 && __GNUC_MINOR__ >= 8

include/linux/module.h

@@ -191,9 +191,10 @@ __asm__(".section .modinfo\n\t.previous");
 /* Define the module variable, and usage macros.  */
 extern struct module __this_module;
 
-#define MOD_INC_USE_COUNT	__MOD_INC_USE_COUNT(&__this_module)
-#define MOD_DEC_USE_COUNT	__MOD_DEC_USE_COUNT(&__this_module)
-#define MOD_IN_USE		__MOD_IN_USE(&__this_module)
+#define THIS_MODULE		(&__this_module)
+#define MOD_INC_USE_COUNT	__MOD_INC_USE_COUNT(THIS_MODULE)
+#define MOD_DEC_USE_COUNT	__MOD_DEC_USE_COUNT(THIS_MODULE)
+#define MOD_IN_USE		__MOD_IN_USE(THIS_MODULE)
 
 #ifndef __NO_VERSION__
 #include <linux/version.h>
@@ -215,6 +216,7 @@ const char __module_using_checksums[] __attribute__((section(".modinfo"))) =
 
 #ifndef __GENKSYMS__
 
+#define THIS_MODULE		NULL
 #define MOD_INC_USE_COUNT	do { } while (0)
 #define MOD_DEC_USE_COUNT	do { } while (0)
 #define MOD_IN_USE		1

init/main.c

@@ -68,9 +68,6 @@ extern char *linux_banner;
 extern int console_loglevel;
 
 static int init(void *);
-extern int bdflush(void *);
-extern int kswapd(void *);
-extern void kswapd_setup(void);
 
 extern void init_IRQ(void);
 extern void init_modules(void);
@@ -606,29 +603,12 @@ static void __init do_basic_setup(void)
 #ifdef CONFIG_MAC
 	nubus_init();
 #endif
-#ifdef CONFIG_APM
-	apm_init();
-#endif
 
 	/* Networking initialization needs a process context */ 
 	sock_init();
 
 	do_initcalls();
 
-	/* Launch bdflush from here, instead of the old syscall way. */
-	kernel_thread(bdflush, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGHAND);
-	/* Start the background pageout daemon. */
-	kswapd_setup();
-	kernel_thread(kswapd, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGHAND);
-
-#if CONFIG_AP1000
-	/* Start the async paging daemon. */
-	{
-	  extern int asyncd(void *);	 
-	  kernel_thread(asyncd, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGHAND);
-	}
-#endif
-
 #ifdef CONFIG_BLK_DEV_INITRD
 
 	real_root_dev = ROOT_DEV;

mm/vmscan.c

@@ -437,27 +437,6 @@ static int do_try_to_free_pages(unsigned int gfp_mask)
 	return priority >= 0;
 }
 
-/*
- * Before we start the kernel thread, print out the 
- * kswapd initialization message (otherwise the init message 
- * may be printed in the middle of another driver's init 
- * message).  It looks very bad when that happens.
- */
-void __init kswapd_setup(void)
-{
-       int i;
-       char *revision="$Revision: 1.5 $", *s, *e;
-
-       swap_setup();
-       
-       if ((s = strchr(revision, ':')) &&
-           (e = strchr(s, '$')))
-               s++, i = e - s;
-       else
-               s = revision, i = -1;
-       printk ("Starting kswapd v%.*s\n", i, s);
-}
-
 static struct task_struct *kswapd_process;
 
 /*
@@ -544,4 +523,13 @@ int try_to_free_pages(unsigned int gfp_mask)
 		retval = do_try_to_free_pages(gfp_mask);
 	return retval;
 }
-	
+
+static int __init kswapd_init(void)
+{
+	printk("Starting kswapd v1.6\n");
+	swap_setup();
+	kernel_thread(kswapd, NULL, CLONE_FS | CLONE_FILES | CLONE_SIGHAND);
+	return 0;
+}
+
+module_init(kswapd_init)