Commit 4e6cfefc authored by Chris Wilson's avatar Chris Wilson

drm/i915: Re-use set_base_atomic to share setting of the display registers

Lets try to avoid repeating old bugs.
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
parent 52e68630
......@@ -1502,7 +1502,7 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
dspcntr &= ~DISPPLANE_TILED;
}
if (IS_IRONLAKE(dev))
if (HAS_PCH_SPLIT(dev))
/* must disable */
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
......@@ -1511,20 +1511,19 @@ intel_pipe_set_base_atomic(struct drm_crtc *crtc, struct drm_framebuffer *fb,
Start = obj_priv->gtt_offset;
Offset = y * fb->pitch + x * (fb->bits_per_pixel / 8);
DRM_DEBUG("Writing base %08lX %08lX %d %d\n", Start, Offset, x, y);
DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
Start, Offset, x, y, fb->pitch);
I915_WRITE(dspstride, fb->pitch);
if (IS_I965G(dev)) {
I915_WRITE(dspbase, Offset);
I915_READ(dspbase);
I915_WRITE(dspsurf, Start);
I915_READ(dspsurf);
I915_WRITE(dsptileoff, (y << 16) | x);
I915_WRITE(dspbase, Offset);
} else {
I915_WRITE(dspbase, Start + Offset);
I915_READ(dspbase);
}
POSTING_READ(dspbase);
if ((IS_I965G(dev) || plane == 0))
if (IS_I965G(dev) || plane == 0)
intel_update_fbc(crtc, &crtc->mode);
intel_wait_for_vblank(dev, intel_crtc->pipe);
......@@ -1538,7 +1537,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_framebuffer *old_fb)
{
struct drm_device *dev = crtc->dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct drm_i915_master_private *master_priv;
struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
struct intel_framebuffer *intel_fb;
......@@ -1546,13 +1544,6 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
struct drm_gem_object *obj;
int pipe = intel_crtc->pipe;
int plane = intel_crtc->plane;
unsigned long Start, Offset;
int dspbase = (plane == 0 ? DSPAADDR : DSPBADDR);
int dspsurf = (plane == 0 ? DSPASURF : DSPBSURF);
int dspstride = (plane == 0) ? DSPASTRIDE : DSPBSTRIDE;
int dsptileoff = (plane == 0 ? DSPATILEOFF : DSPBTILEOFF);
int dspcntr_reg = (plane == 0) ? DSPACNTR : DSPBCNTR;
u32 dspcntr;
int ret;
/* no fb bound */
......@@ -1588,71 +1579,18 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y,
return ret;
}
dspcntr = I915_READ(dspcntr_reg);
/* Mask out pixel format bits in case we change it */
dspcntr &= ~DISPPLANE_PIXFORMAT_MASK;
switch (crtc->fb->bits_per_pixel) {
case 8:
dspcntr |= DISPPLANE_8BPP;
break;
case 16:
if (crtc->fb->depth == 15)
dspcntr |= DISPPLANE_15_16BPP;
else
dspcntr |= DISPPLANE_16BPP;
break;
case 24:
case 32:
if (crtc->fb->depth == 30)
dspcntr |= DISPPLANE_32BPP_30BIT_NO_ALPHA;
else
dspcntr |= DISPPLANE_32BPP_NO_ALPHA;
break;
default:
DRM_ERROR("Unknown color depth\n");
ret = intel_pipe_set_base_atomic(crtc, crtc->fb, x, y);
if (ret) {
i915_gem_object_unpin(obj);
mutex_unlock(&dev->struct_mutex);
return -EINVAL;
}
if (IS_I965G(dev)) {
if (obj_priv->tiling_mode != I915_TILING_NONE)
dspcntr |= DISPPLANE_TILED;
else
dspcntr &= ~DISPPLANE_TILED;
}
if (HAS_PCH_SPLIT(dev))
/* must disable */
dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE;
I915_WRITE(dspcntr_reg, dspcntr);
Start = obj_priv->gtt_offset;
Offset = y * crtc->fb->pitch + x * (crtc->fb->bits_per_pixel / 8);
DRM_DEBUG_KMS("Writing base %08lX %08lX %d %d %d\n",
Start, Offset, x, y, crtc->fb->pitch);
I915_WRITE(dspstride, crtc->fb->pitch);
if (IS_I965G(dev)) {
I915_WRITE(dspsurf, Start);
I915_WRITE(dsptileoff, (y << 16) | x);
I915_WRITE(dspbase, Offset);
} else {
I915_WRITE(dspbase, Start + Offset);
return ret;
}
POSTING_READ(dspbase);
if ((IS_I965G(dev) || plane == 0))
intel_update_fbc(crtc, &crtc->mode);
intel_wait_for_vblank(dev, pipe);
if (old_fb) {
intel_fb = to_intel_framebuffer(old_fb);
obj_priv = to_intel_bo(intel_fb->obj);
i915_gem_object_unpin(intel_fb->obj);
}
intel_increase_pllclock(crtc, true);
mutex_unlock(&dev->struct_mutex);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment