fpga: Use device_get_match_data()

Use preferred device_get_match_data() instead of of_match_device() to
get the driver match data. With this, adjust the includes to explicitly
include the correct headers.

Also drop of_match_ptr for xlnx_pr_decoupler_of_match, which is not
necessary because DT is always used for this driver.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Xu Yilun <yilun.xu@intel.com>
Link: https://lore.kernel.org/r/20231006224633.445035-1-robh@kernel.org
[yilun.xu@intel.com: merge the fix 20231012192149.1546368-1-robh@kernel.org]
Link: https://lore.kernel.org/r/20231012192149.1546368-1-robh@kernel.orgSigned-off-by: Xu Yilun <yilun.xu@linux.intel.com>

drivers/fpga/altera-hps2fpga.c

@@ -24,7 +24,8 @@
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/of_platform.h>
+#include <linux/of.h>
+#include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
 #include <linux/spinlock.h>
@@ -127,18 +128,11 @@ static int alt_fpga_bridge_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct altera_hps2fpga_data *priv;
-	const struct of_device_id *of_id;
 	struct fpga_bridge *br;
 	u32 enable;
 	int ret;
 
-	of_id = of_match_device(altera_fpga_of_match, dev);
-	if (!of_id) {
-		dev_err(dev, "failed to match device\n");
-		return -ENODEV;
-	}
-
-	priv = (struct altera_hps2fpga_data *)of_id->data;
+	priv = (struct altera_hps2fpga_data *)device_get_match_data(dev);
 
 	priv->bridge_reset = of_reset_control_get_exclusive_by_index(dev->of_node,
 								     0);

drivers/fpga/xilinx-pr-decoupler.c

@@ -10,8 +10,10 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/kernel.h>
-#include <linux/of_device.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
 #include <linux/fpga/fpga-bridge.h>
 
 #define CTRL_CMD_DECOUPLE	BIT(0)
@@ -81,7 +83,6 @@ static const struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
 	.enable_show = xlnx_pr_decoupler_enable_show,
 };
 
-#ifdef CONFIG_OF
 static const struct xlnx_config_data decoupler_config = {
 	.name = "Xilinx PR Decoupler",
 };
@@ -100,11 +101,9 @@ static const struct of_device_id xlnx_pr_decoupler_of_match[] = {
 	{},
 };
 MODULE_DEVICE_TABLE(of, xlnx_pr_decoupler_of_match);
-#endif
 
 static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
 {
-	struct device_node *np = pdev->dev.of_node;
 	struct xlnx_pr_decoupler_data *priv;
 	struct fpga_bridge *br;
 	int err;
@@ -113,13 +112,7 @@ static int xlnx_pr_decoupler_probe(struct platform_device *pdev)
 	if (!priv)
 		return -ENOMEM;
 
-	if (np) {
-		const struct of_device_id *match;
-
-		match = of_match_node(xlnx_pr_decoupler_of_match, np);
-		if (match && match->data)
-			priv->ipconfig = match->data;
-	}
+	priv->ipconfig = device_get_match_data(&pdev->dev);
 
 	priv->io_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(priv->io_base))
@@ -174,7 +167,7 @@ static struct platform_driver xlnx_pr_decoupler_driver = {
 	.remove = xlnx_pr_decoupler_remove,
 	.driver = {
 		.name = "xlnx_pr_decoupler",
-		.of_match_table = of_match_ptr(xlnx_pr_decoupler_of_match),
+		.of_match_table = xlnx_pr_decoupler_of_match,
 	},
 };