Commit 4e8186b6 authored by Jesse Brandeburg's avatar Jesse Brandeburg Committed by Jeff Kirsher

e1000e: implement MDI/MDI-X control

Some users report issues with link failing when connected to certain
switches.  This gives the user the ability to control the MDI state
from the driver, allowing users to work around some improperly
behaving switches.

Forcing in this driver is for now only allowed when auto-neg is
enabled.

This is in regards to the related ethtool app patch and
bugzilla.kernel.org bug 11998
Signed-off-by: default avatarJesse Brandeburg <jesse.brandeburg@intel.com>
CC: bruce.w.allan@intel.com
CC: n.poppelier@xs4all.nl
CC: bastien@durel.org
CC: jsveiga@it.eng.br
Tested-by: Aaron Brown aaron.f.brown@intel.com
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent c819bbd5
...@@ -199,6 +199,11 @@ static int e1000_get_settings(struct net_device *netdev, ...@@ -199,6 +199,11 @@ static int e1000_get_settings(struct net_device *netdev,
else else
ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID; ecmd->eth_tp_mdix = ETH_TP_MDI_INVALID;
if (hw->phy.mdix == AUTO_ALL_MODES)
ecmd->eth_tp_mdix_ctrl = ETH_TP_MDI_AUTO;
else
ecmd->eth_tp_mdix_ctrl = hw->phy.mdix;
return 0; return 0;
} }
...@@ -241,6 +246,10 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx) ...@@ -241,6 +246,10 @@ static int e1000_set_spd_dplx(struct e1000_adapter *adapter, u32 spd, u8 dplx)
default: default:
goto err_inval; goto err_inval;
} }
/* clear MDI, MDI(-X) override is only allowed when autoneg enabled */
adapter->hw.phy.mdix = AUTO_ALL_MODES;
return 0; return 0;
err_inval: err_inval:
...@@ -264,6 +273,22 @@ static int e1000_set_settings(struct net_device *netdev, ...@@ -264,6 +273,22 @@ static int e1000_set_settings(struct net_device *netdev,
return -EINVAL; return -EINVAL;
} }
/*
* MDI setting is only allowed when autoneg enabled because
* some hardware doesn't allow MDI setting when speed or
* duplex is forced.
*/
if (ecmd->eth_tp_mdix_ctrl) {
if (hw->phy.media_type != e1000_media_type_copper)
return -EOPNOTSUPP;
if ((ecmd->eth_tp_mdix_ctrl != ETH_TP_MDI_AUTO) &&
(ecmd->autoneg != AUTONEG_ENABLE)) {
e_err("forcing MDI/MDI-X state is not supported when link speed and/or duplex are forced\n");
return -EINVAL;
}
}
while (test_and_set_bit(__E1000_RESETTING, &adapter->state)) while (test_and_set_bit(__E1000_RESETTING, &adapter->state))
usleep_range(1000, 2000); usleep_range(1000, 2000);
...@@ -282,20 +307,32 @@ static int e1000_set_settings(struct net_device *netdev, ...@@ -282,20 +307,32 @@ static int e1000_set_settings(struct net_device *netdev,
hw->fc.requested_mode = e1000_fc_default; hw->fc.requested_mode = e1000_fc_default;
} else { } else {
u32 speed = ethtool_cmd_speed(ecmd); u32 speed = ethtool_cmd_speed(ecmd);
/* calling this overrides forced MDI setting */
if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) { if (e1000_set_spd_dplx(adapter, speed, ecmd->duplex)) {
clear_bit(__E1000_RESETTING, &adapter->state); clear_bit(__E1000_RESETTING, &adapter->state);
return -EINVAL; return -EINVAL;
} }
} }
/* MDI-X => 2; MDI => 1; Auto => 3 */
if (ecmd->eth_tp_mdix_ctrl) {
/*
* fix up the value for auto (3 => 0) as zero is mapped
* internally to auto
*/
if (ecmd->eth_tp_mdix_ctrl == ETH_TP_MDI_AUTO)
hw->phy.mdix = AUTO_ALL_MODES;
else
hw->phy.mdix = ecmd->eth_tp_mdix_ctrl;
}
/* reset the link */ /* reset the link */
if (netif_running(adapter->netdev)) { if (netif_running(adapter->netdev)) {
e1000e_down(adapter); e1000e_down(adapter);
e1000e_up(adapter); e1000e_up(adapter);
} else { } else
e1000e_reset(adapter); e1000e_reset(adapter);
}
clear_bit(__E1000_RESETTING, &adapter->state); clear_bit(__E1000_RESETTING, &adapter->state);
return 0; return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment