Commit 4eb2f557 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

media: v4l2-subdev: better document IO pin configuration flags

Convert V4L2_SUBDEV_IO_PIN_* to enums, use BIT() and document
via kernel-doc.
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
parent 0722ef82
......@@ -201,14 +201,14 @@ static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
} else {
/* IRQ_N */
if (p[i].flags &
(V4L2_SUBDEV_IO_PIN_DISABLE |
V4L2_SUBDEV_IO_PIN_INPUT)) {
(BIT(V4L2_SUBDEV_IO_PIN_DISABLE) |
BIT(V4L2_SUBDEV_IO_PIN_INPUT))) {
pin_ctrl &= ~(0x1 << 25);
} else {
pin_ctrl |= (0x1 << 25);
}
if (p[i].flags &
V4L2_SUBDEV_IO_PIN_ACTIVE_LOW) {
BIT(V4L2_SUBDEV_IO_PIN_ACTIVE_LOW)) {
pin_ctrl &= ~(0x1 << 24);
} else {
pin_ctrl |= (0x1 << 24);
......@@ -224,7 +224,7 @@ static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
} else {
/* GPIO19 */
gpio_oe &= ~(0x1 << 0);
if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_SET_VALUE)) {
gpio_data &= ~(0x1 << 0);
gpio_data |= ((p[i].value & 0x1) << 0);
}
......@@ -236,7 +236,7 @@ static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
if (p[i].function != CX23885_PAD_GPIO20) {
/* IR_TX */
gpio_oe |= (0x1 << 1);
if (p[i].flags & V4L2_SUBDEV_IO_PIN_DISABLE)
if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_DISABLE))
pin_ctrl &= ~(0x1 << 10);
else
pin_ctrl |= (0x1 << 10);
......@@ -245,7 +245,7 @@ static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
} else {
/* GPIO20 */
gpio_oe &= ~(0x1 << 1);
if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_SET_VALUE)) {
gpio_data &= ~(0x1 << 1);
gpio_data |= ((p[i].value & 0x1) << 1);
}
......@@ -263,7 +263,7 @@ static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
} else {
/* GPIO21 */
gpio_oe &= ~(0x1 << 2);
if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_SET_VALUE)) {
gpio_data &= ~(0x1 << 2);
gpio_data |= ((p[i].value & 0x1) << 2);
}
......@@ -281,7 +281,7 @@ static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
} else {
/* GPIO22 */
gpio_oe &= ~(0x1 << 3);
if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_SET_VALUE)) {
gpio_data &= ~(0x1 << 3);
gpio_data |= ((p[i].value & 0x1) << 3);
}
......@@ -299,7 +299,7 @@ static int cx23885_s_io_pin_config(struct v4l2_subdev *sd, size_t n,
} else {
/* GPIO23 */
gpio_oe &= ~(0x1 << 4);
if (p[i].flags & V4L2_SUBDEV_IO_PIN_SET_VALUE) {
if (p[i].flags & BIT(V4L2_SUBDEV_IO_PIN_SET_VALUE)) {
gpio_data &= ~(0x1 << 4);
gpio_data |= ((p[i].value & 0x1) << 4);
}
......
......@@ -1816,13 +1816,13 @@ int cx23885_ir_init(struct cx23885_dev *dev)
{
static struct v4l2_subdev_io_pin_config ir_rxtx_pin_cfg[] = {
{
.flags = V4L2_SUBDEV_IO_PIN_INPUT,
.flags = BIT(V4L2_SUBDEV_IO_PIN_INPUT),
.pin = CX23885_PIN_IR_RX_GPIO19,
.function = CX23885_PAD_IR_RX,
.value = 0,
.strength = CX25840_PIN_DRIVE_MEDIUM,
}, {
.flags = V4L2_SUBDEV_IO_PIN_OUTPUT,
.flags = BIT(V4L2_SUBDEV_IO_PIN_OUTPUT),
.pin = CX23885_PIN_IR_TX_GPIO20,
.function = CX23885_PAD_IR_TX,
.value = 0,
......@@ -1833,7 +1833,7 @@ int cx23885_ir_init(struct cx23885_dev *dev)
static struct v4l2_subdev_io_pin_config ir_rx_pin_cfg[] = {
{
.flags = V4L2_SUBDEV_IO_PIN_INPUT,
.flags = BIT(V4L2_SUBDEV_IO_PIN_INPUT),
.pin = CX23885_PIN_IR_RX_GPIO19,
.function = CX23885_PAD_IR_RX,
.value = 0,
......
......@@ -108,22 +108,31 @@ struct v4l2_decode_vbi_line {
* not yet implemented) since ops provide proper type-checking.
*/
/* Subdevice external IO pin configuration */
#define V4L2_SUBDEV_IO_PIN_DISABLE (1 << 0) /* ENABLE assumed */
#define V4L2_SUBDEV_IO_PIN_OUTPUT (1 << 1)
#define V4L2_SUBDEV_IO_PIN_INPUT (1 << 2)
#define V4L2_SUBDEV_IO_PIN_SET_VALUE (1 << 3) /* Set output value */
#define V4L2_SUBDEV_IO_PIN_ACTIVE_LOW (1 << 4) /* ACTIVE HIGH assumed */
/**
* enum v4l2_subdev_io_pin_bits - Subdevice external IO pin configuration
* bits
*
* @V4L2_SUBDEV_IO_PIN_DISABLE: disables a pin config. ENABLE assumed.
* @V4L2_SUBDEV_IO_PIN_OUTPUT: set it if pin is an output.
* @V4L2_SUBDEV_IO_PIN_INPUT: set it if pin is an input.
* @V4L2_SUBDEV_IO_PIN_SET_VALUE: to set the output value via
* &struct v4l2_subdev_io_pin_config->value.
* @V4L2_SUBDEV_IO_PIN_ACTIVE_LOW: pin active is bit 0.
* Otherwise, ACTIVE HIGH is assumed.
*/
enum v4l2_subdev_io_pin_bits {
V4L2_SUBDEV_IO_PIN_DISABLE = 0,
V4L2_SUBDEV_IO_PIN_OUTPUT = 1,
V4L2_SUBDEV_IO_PIN_INPUT = 2,
V4L2_SUBDEV_IO_PIN_SET_VALUE = 3,
V4L2_SUBDEV_IO_PIN_ACTIVE_LOW = 4,
};
/**
* struct v4l2_subdev_io_pin_config - Subdevice external IO pin configuration
*
* @flags: bitmask with flags for this pin's config:
* %V4L2_SUBDEV_IO_PIN_DISABLE - disables a pin config,
* %V4L2_SUBDEV_IO_PIN_OUTPUT - if pin is an output,
* %V4L2_SUBDEV_IO_PIN_INPUT - if pin is an input,
* %V4L2_SUBDEV_IO_PIN_SET_VALUE - to set the output value via @value
* and %V4L2_SUBDEV_IO_PIN_ACTIVE_LOW - if active is 0.
* @flags: bitmask with flags for this pin's config, whose bits are defined by
* &enum v4l2_subdev_io_pin_bits.
* @pin: Chip external IO pin to configure
* @function: Internal signal pad/function to route to IO pin
* @value: Initial value for pin - e.g. GPIO output value
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment