Commit 4f059d51 authored by Andrew Banman's avatar Andrew Banman Committed by Ingo Molnar

x86/platform/uv/BAU: Add UV4-specific functions

Add the UV4-specific function definitions and define an operations struct
to implement them in the BAU driver.

Many BAU MMRs, although functionally the same, have new addresses on UV4
due to hardware changes. Each MMR requires new read/write functions, but
their implementation in the driver does not change. Thus, it is enough to
enumerate them in the operations struct for the changes to take effect.
Signed-off-by: default avatarAndrew Banman <abanman@sgi.com>
Acked-by: default avatarThomas Gleixner <tglx@linutronix.de>
Acked-by: default avatarMike Travis <travis@sgi.com>
Acked-by: default avatarDimitri Sivanich <sivanich@sgi.com>
Acked-by: default avatarThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: akpm@linux-foundation.org
Cc: rja@sgi.com
Link: http://lkml.kernel.org/r/1474474161-265604-11-git-send-email-abanman@sgi.comSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent 6d78059b
......@@ -664,6 +664,16 @@ static inline void write_gmmr_activation(int pnode, unsigned long mmr_image)
write_gmmr(pnode, UVH_LB_BAU_SB_ACTIVATION_CONTROL, mmr_image);
}
static inline void write_mmr_proc_payload_first(int pnode, unsigned long mmr_image)
{
write_gmmr(pnode, UV4H_LB_PROC_INTD_QUEUE_FIRST, mmr_image);
}
static inline void write_mmr_proc_payload_last(int pnode, unsigned long mmr_image)
{
write_gmmr(pnode, UV4H_LB_PROC_INTD_QUEUE_LAST, mmr_image);
}
static inline void write_mmr_payload_first(int pnode, unsigned long mmr_image)
{
write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, mmr_image);
......@@ -709,6 +719,26 @@ static inline unsigned long read_gmmr_sw_ack(int pnode)
return read_gmmr(pnode, UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
}
static inline void write_mmr_proc_sw_ack(unsigned long mr)
{
uv_write_local_mmr(UV4H_LB_PROC_INTD_SOFT_ACK_CLEAR, mr);
}
static inline void write_gmmr_proc_sw_ack(int pnode, unsigned long mr)
{
write_gmmr(pnode, UV4H_LB_PROC_INTD_SOFT_ACK_CLEAR, mr);
}
static inline unsigned long read_mmr_proc_sw_ack(void)
{
return read_lmmr(UV4H_LB_PROC_INTD_SOFT_ACK_PENDING);
}
static inline unsigned long read_gmmr_proc_sw_ack(int pnode)
{
return read_gmmr(pnode, UV4H_LB_PROC_INTD_SOFT_ACK_PENDING);
}
static inline void write_mmr_data_config(int pnode, unsigned long mr)
{
uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, mr);
......
......@@ -36,6 +36,17 @@ static struct bau_operations uv123_bau_ops = {
.write_payload_last = write_mmr_payload_last,
};
static struct bau_operations uv4_bau_ops = {
.bau_gpa_to_offset = uv_gpa_to_soc_phys_ram,
.read_l_sw_ack = read_mmr_proc_sw_ack,
.read_g_sw_ack = read_gmmr_proc_sw_ack,
.write_l_sw_ack = write_mmr_proc_sw_ack,
.write_g_sw_ack = write_gmmr_proc_sw_ack,
.write_payload_first = write_mmr_proc_payload_first,
.write_payload_last = write_mmr_proc_payload_last,
};
/* timeouts in nanoseconds (indexed by UVH_AGING_PRESCALE_SEL urgency7 30:28) */
static int timeout_base_ns[] = {
20,
......@@ -2158,7 +2169,9 @@ static int __init uv_bau_init(void)
if (!is_uv_system())
return 0;
if (is_uv3_hub())
if (is_uv4_hub())
ops = uv4_bau_ops;
else if (is_uv3_hub())
ops = uv123_bau_ops;
else if (is_uv2_hub())
ops = uv123_bau_ops;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment