Commit 4f38c566 authored by Mark Brown's avatar Mark Brown

Merge remote-tracking branches 'regulator/topic/tps6524x' and...

Merge remote-tracking branches 'regulator/topic/tps6524x' and 'regulator/topic/twl' into regulator-next
......@@ -57,6 +57,12 @@ For twl4030 regulators/LDOs
Optional properties:
- Any optional property defined in bindings/regulator/regulator.txt
For twl4030 regulators/LDOs:
- regulator-initial-mode:
- 0x08 - Sleep mode, the nominal output voltage is maintained with low power
consumption with low load current capability.
- 0x0e - Active mode, the regulator can deliver its nominal output voltage
with full-load current capability.
Example:
......
......@@ -600,7 +600,7 @@ static int pmic_probe(struct spi_device *spi)
memset(hw, 0, sizeof(struct tps6524x));
hw->dev = dev;
hw->spi = spi_dev_get(spi);
hw->spi = spi;
mutex_init(&hw->lock);
for (i = 0; i < N_REGULATORS; i++, info++, init_data++) {
......
......@@ -21,7 +21,7 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/of_regulator.h>
#include <linux/i2c/twl.h>
#include <linux/delay.h>
/*
* The TWL4030/TW5030/TPS659x0/TWL6030 family chips include power management, a
......@@ -188,6 +188,74 @@ static int twl6030reg_is_enabled(struct regulator_dev *rdev)
return grp && (val == TWL6030_CFG_STATE_ON);
}
#define PB_I2C_BUSY BIT(0)
#define PB_I2C_BWEN BIT(1)
/* Wait until buffer empty/ready to send a word on power bus. */
static int twl4030_wait_pb_ready(void)
{
int ret;
int timeout = 10;
u8 val;
do {
ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val,
TWL4030_PM_MASTER_PB_CFG);
if (ret < 0)
return ret;
if (!(val & PB_I2C_BUSY))
return 0;
mdelay(1);
timeout--;
} while (timeout);
return -ETIMEDOUT;
}
/* Send a word over the powerbus */
static int twl4030_send_pb_msg(unsigned msg)
{
u8 val;
int ret;
/* save powerbus configuration */
ret = twl_i2c_read_u8(TWL_MODULE_PM_MASTER, &val,
TWL4030_PM_MASTER_PB_CFG);
if (ret < 0)
return ret;
/* Enable i2c access to powerbus */
ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val | PB_I2C_BWEN,
TWL4030_PM_MASTER_PB_CFG);
if (ret < 0)
return ret;
ret = twl4030_wait_pb_ready();
if (ret < 0)
return ret;
ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg >> 8,
TWL4030_PM_MASTER_PB_WORD_MSB);
if (ret < 0)
return ret;
ret = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, msg & 0xff,
TWL4030_PM_MASTER_PB_WORD_LSB);
if (ret < 0)
return ret;
ret = twl4030_wait_pb_ready();
if (ret < 0)
return ret;
/* Restore powerbus configuration */
return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, val,
TWL4030_PM_MASTER_PB_CFG);
}
static int twl4030reg_enable(struct regulator_dev *rdev)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
......@@ -303,7 +371,6 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
{
struct twlreg_info *info = rdev_get_drvdata(rdev);
unsigned message;
int status;
/* We can only set the mode through state machine commands... */
switch (mode) {
......@@ -317,20 +384,19 @@ static int twl4030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
return -EINVAL;
}
/* Ensure the resource is associated with some group */
status = twlreg_grp(rdev);
if (status < 0)
return status;
if (!(status & (P3_GRP_4030 | P2_GRP_4030 | P1_GRP_4030)))
return -EACCES;
status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
message >> 8, TWL4030_PM_MASTER_PB_WORD_MSB);
if (status < 0)
return status;
return twl4030_send_pb_msg(message);
}
return twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
message & 0xff, TWL4030_PM_MASTER_PB_WORD_LSB);
static inline unsigned int twl4030reg_map_mode(unsigned int mode)
{
switch (mode) {
case RES_STATE_ACTIVE:
return REGULATOR_MODE_NORMAL;
case RES_STATE_SLEEP:
return REGULATOR_MODE_STANDBY;
default:
return -EINVAL;
}
}
static int twl6030reg_set_mode(struct regulator_dev *rdev, unsigned mode)
......@@ -835,10 +901,11 @@ static struct regulator_ops twlsmps_ops = {
#define TWL4030_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
remap_conf) \
TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, \
remap_conf, TWL4030, twl4030fixed_ops)
remap_conf, TWL4030, twl4030fixed_ops, \
twl4030reg_map_mode)
#define TWL6030_FIXED_LDO(label, offset, mVolts, turnon_delay) \
TWL_FIXED_LDO(label, offset, mVolts, 0x0, turnon_delay, \
0x0, TWL6030, twl6030fixed_ops)
0x0, TWL6030, twl6030fixed_ops, 0x0)
#define TWL4030_ADJUSTABLE_LDO(label, offset, num, turnon_delay, remap_conf) \
static const struct twlreg_info TWL4030_INFO_##label = { \
......@@ -855,6 +922,7 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.enable_time = turnon_delay, \
.of_map_mode = twl4030reg_map_mode, \
}, \
}
......@@ -870,6 +938,7 @@ static const struct twlreg_info TWL4030_INFO_##label = { \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.enable_time = turnon_delay, \
.of_map_mode = twl4030reg_map_mode, \
}, \
}
......@@ -915,7 +984,7 @@ static const struct twlreg_info TWL6032_INFO_##label = { \
}
#define TWL_FIXED_LDO(label, offset, mVolts, num, turnon_delay, remap_conf, \
family, operations) \
family, operations, map_mode) \
static const struct twlreg_info TWLFIXED_INFO_##label = { \
.base = offset, \
.id = num, \
......@@ -930,6 +999,7 @@ static const struct twlreg_info TWLFIXED_INFO_##label = { \
.owner = THIS_MODULE, \
.min_uV = mVolts * 1000, \
.enable_time = turnon_delay, \
.of_map_mode = map_mode, \
}, \
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment