Commit 4fa084af authored by Ben Dooks's avatar Ben Dooks Committed by Ben Dooks

ARM: OSIRIS: DVS (Dynamic Voltage Scaling) supoort.

Add a driver to provide DVS for the Simtec Osiris module to reduce
the power consumption whilst idling.

The DVS driver alters the voltage supplied to the ARM core depending
on the frequency it is running at. The driver itself does not do any
of the frequency alteration, which is left up to the cpufreq driver.
Signed-off-by: default avatarBen Dooks <ben@simtec.co.uk>
Signed-off-by: default avatarSimtec Linux Team <linux@simtec.co.uk>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent 4d3a3469
......@@ -53,6 +53,19 @@ config MACH_OSIRIS
Say Y here if you are using the Simtec IM2440D20 module, also
known as the Osiris.
config MACH_OSIRIS_DVS
tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
depends on MACH_OSIRIS
select TPS65010
help
Say Y/M here if you want to have dynamic voltage scaling support
on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
The DVS driver alters the voltage supplied to the ARM core
depending on the frequency it is running at. The driver itself
does not do any of the frequency alteration, which is left up
to the cpufreq driver.
config MACH_RX3715
bool "HP iPAQ rx3715"
select CPU_S3C2440
......
......@@ -23,3 +23,7 @@ obj-$(CONFIG_ARCH_S3C2440) += mach-smdk2440.o
obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
# extra machine support
obj-$(CONFIG_MACH_OSIRIS_DVS) += mach-osiris-dvs.o
/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
*
* Copyright (c) 2009 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* Simtec Osiris Dynamic Voltage Scaling support.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/cpufreq.h>
#include <linux/gpio.h>
#include <linux/i2c/tps65010.h>
#include <plat/cpu-freq.h>
#define OSIRIS_GPIO_DVS S3C2410_GPB(5)
static bool dvs_en;
static void osiris_dvs_tps_setdvs(bool on)
{
unsigned vregs1 = 0, vdcdc2 = 0;
if (!on) {
vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
vregs1 = TPS_LDO1_OFF; /* turn off in low-power mode */
}
dvs_en = on;
vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
tps65010_config_vregs1(vregs1);
tps65010_config_vdcdc2(vdcdc2);
}
static bool is_dvs(struct s3c_freq *f)
{
/* at the moment, we assume ARMCLK = HCLK => DVS */
return f->armclk == f->hclk;
}
/* keep track of current state */
static bool cur_dvs = false;
static int osiris_dvs_notify(struct notifier_block *nb,
unsigned long val, void *data)
{
struct cpufreq_freqs *cf = data;
struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
bool old_dvs = is_dvs(&freqs->old);
bool new_dvs = is_dvs(&freqs->new);
int ret = 0;
if (!dvs_en)
return 0;
printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
freqs->old.armclk, freqs->old.hclk,
freqs->new.armclk, freqs->new.hclk);
switch (val) {
case CPUFREQ_PRECHANGE:
if (old_dvs & !new_dvs ||
cur_dvs & !new_dvs) {
pr_debug("%s: exiting dvs\n", __func__);
cur_dvs = false;
gpio_set_value(OSIRIS_GPIO_DVS, 1);
}
break;
case CPUFREQ_POSTCHANGE:
if (!old_dvs & new_dvs ||
!cur_dvs & new_dvs) {
pr_debug("entering dvs\n");
cur_dvs = true;
gpio_set_value(OSIRIS_GPIO_DVS, 0);
}
break;
}
return ret;
}
static struct notifier_block osiris_dvs_nb = {
.notifier_call = osiris_dvs_notify,
};
static int __devinit osiris_dvs_probe(struct platform_device *pdev)
{
int ret;
dev_info(&pdev->dev, "initialising\n");
ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
if (ret) {
dev_err(&pdev->dev, "cannot claim gpio\n");
goto err_nogpio;
}
/* start with dvs disabled */
gpio_direction_output(OSIRIS_GPIO_DVS, 1);
ret = cpufreq_register_notifier(&osiris_dvs_nb,
CPUFREQ_TRANSITION_NOTIFIER);
if (ret) {
dev_err(&pdev->dev, "failed to register with cpufreq\n");
goto err_nofreq;
}
osiris_dvs_tps_setdvs(true);
return 0;
err_nofreq:
gpio_free(OSIRIS_GPIO_DVS);
err_nogpio:
return ret;
}
static int __devexit osiris_dvs_remove(struct platform_device *pdev)
{
dev_info(&pdev->dev, "exiting\n");
/* disable any current dvs */
gpio_set_value(OSIRIS_GPIO_DVS, 1);
osiris_dvs_tps_setdvs(false);
cpufreq_unregister_notifier(&osiris_dvs_nb,
CPUFREQ_TRANSITION_NOTIFIER);
gpio_free(OSIRIS_GPIO_DVS);
return 0;
}
/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
* out if the configuration isn't set. */
static int osiris_dvs_suspend(struct device *dev)
{
gpio_set_value(OSIRIS_GPIO_DVS, 1);
osiris_dvs_tps_setdvs(false);
cur_dvs = false;
return 0;
}
static int osiris_dvs_resume(struct device *dev)
{
osiris_dvs_tps_setdvs(true);
return 0;
}
static const struct dev_pm_ops osiris_dvs_pm = {
.suspend = osiris_dvs_suspend,
.resume = osiris_dvs_resume,
};
static struct platform_driver osiris_dvs_driver = {
.probe = osiris_dvs_probe,
.remove = __devexit_p(osiris_dvs_remove),
.driver = {
.name = "osiris-dvs",
.owner = THIS_MODULE,
.pm = &osiris_dvs_pm,
},
};
static int __init osiris_dvs_init(void)
{
return platform_driver_register(&osiris_dvs_driver);
}
static void __exit osiris_dvs_exit(void)
{
platform_driver_unregister(&osiris_dvs_driver);
}
module_init(osiris_dvs_init);
module_exit(osiris_dvs_exit);
MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:osiris-dvs");
......@@ -23,6 +23,8 @@
#include <linux/i2c.h>
#include <linux/io.h>
#include <linux/i2c/tps65010.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
......@@ -326,12 +328,44 @@ static struct sys_device osiris_pm_sysdev = {
.cls = &osiris_pm_sysclass,
};
/* Link for DVS driver to TPS65011 */
static void osiris_tps_release(struct device *dev)
{
/* static device, do not need to release anything */
}
static struct platform_device osiris_tps_device = {
.name = "osiris-dvs",
.id = -1,
.dev.release = osiris_tps_release,
};
static int osiris_tps_setup(struct i2c_client *client, void *context)
{
osiris_tps_device.dev.parent = &client->dev;
return platform_device_register(&osiris_tps_device);
}
static int osiris_tps_remove(struct i2c_client *client, void *context)
{
platform_device_unregister(&osiris_tps_device);
return 0;
}
static struct tps65010_board osiris_tps_board = {
.base = -1, /* GPIO can go anywhere at the moment */
.setup = osiris_tps_setup,
.teardown = osiris_tps_remove,
};
/* I2C devices fitted. */
static struct i2c_board_info osiris_i2c_devs[] __initdata = {
{
I2C_BOARD_INFO("tps65011", 0x48),
.irq = IRQ_EINT20,
.platform_data = &osiris_tps_board,
},
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment