Merge branch 'bonding-802-3ad-fix-no-transmission-of-lacpdus'

Jonathan Toppins says:

====================
bonding: 802.3ad: fix no transmission of LACPDUs

Configuring a bond in a specific order can leave the bond in a state
where it never transmits LACPDUs.

The first patch adds some kselftest infrastructure and the reproducer
that demonstrates the problem. The second patch fixes the issue. The
new third patch makes ad_ticks_per_sec a static const and removes the
passing of this variable via the stack.
====================

Link: https://lore.kernel.org/r/cover.1660919940.git.jtoppins@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

MAINTAINERS

@@ -3679,6 +3679,7 @@ F:	Documentation/networking/bonding.rst
 F:	drivers/net/bonding/
 F:	include/net/bond*
 F:	include/uapi/linux/if_bonding.h
+F:	tools/testing/selftests/net/bonding/
 
 BOSCH SENSORTEC BMA400 ACCELEROMETER IIO DRIVER
 M:	Dan Robertson <dan@dlrobertson.com>

drivers/net/bonding/bond_3ad.c

@@ -84,7 +84,8 @@ enum ad_link_speed_type {
 static const u8 null_mac_addr[ETH_ALEN + 2] __long_aligned = {
 	0, 0, 0, 0, 0, 0
 };
-static u16 ad_ticks_per_sec;
+
+static const u16 ad_ticks_per_sec = 1000 / AD_TIMER_INTERVAL;
 static const int ad_delta_in_ticks = (AD_TIMER_INTERVAL * HZ) / 1000;
 
 static const u8 lacpdu_mcast_addr[ETH_ALEN + 2] __long_aligned =
@@ -2001,36 +2002,24 @@ void bond_3ad_initiate_agg_selection(struct bonding *bond, int timeout)
 /**
  * bond_3ad_initialize - initialize a bond's 802.3ad parameters and structures
  * @bond: bonding struct to work on
- * @tick_resolution: tick duration (millisecond resolution)
  *
  * Can be called only after the mac address of the bond is set.
  */
-void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution)
+void bond_3ad_initialize(struct bonding *bond)
 {
-	/* check that the bond is not initialized yet */
-	if (!MAC_ADDRESS_EQUAL(&(BOND_AD_INFO(bond).system.sys_mac_addr),
-				bond->dev->dev_addr)) {
-
-		BOND_AD_INFO(bond).aggregator_identifier = 0;
-
-		BOND_AD_INFO(bond).system.sys_priority =
-			bond->params.ad_actor_sys_prio;
-		if (is_zero_ether_addr(bond->params.ad_actor_system))
-			BOND_AD_INFO(bond).system.sys_mac_addr =
-			    *((struct mac_addr *)bond->dev->dev_addr);
-		else
-			BOND_AD_INFO(bond).system.sys_mac_addr =
-			    *((struct mac_addr *)bond->params.ad_actor_system);
-
-		/* initialize how many times this module is called in one
-		 * second (should be about every 100ms)
-		 */
-		ad_ticks_per_sec = tick_resolution;
+	BOND_AD_INFO(bond).aggregator_identifier = 0;
+	BOND_AD_INFO(bond).system.sys_priority =
+		bond->params.ad_actor_sys_prio;
+	if (is_zero_ether_addr(bond->params.ad_actor_system))
+		BOND_AD_INFO(bond).system.sys_mac_addr =
+		    *((struct mac_addr *)bond->dev->dev_addr);
+	else
+		BOND_AD_INFO(bond).system.sys_mac_addr =
+		    *((struct mac_addr *)bond->params.ad_actor_system);
 
-		bond_3ad_initiate_agg_selection(bond,
-						AD_AGGREGATOR_SELECTION_TIMER *
-						ad_ticks_per_sec);
-	}
+	bond_3ad_initiate_agg_selection(bond,
+					AD_AGGREGATOR_SELECTION_TIMER *
+					ad_ticks_per_sec);
 }
 
 /**

drivers/net/bonding/bond_main.c

@@ -2081,7 +2081,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 			/* Initialize AD with the number of times that the AD timer is called in 1 second
 			 * can be called only after the mac address of the bond is set
 			 */
-			bond_3ad_initialize(bond, 1000/AD_TIMER_INTERVAL);
+			bond_3ad_initialize(bond);
 		} else {
 			SLAVE_AD_INFO(new_slave)->id =
 				SLAVE_AD_INFO(prev_slave)->id + 1;

include/net/bond_3ad.h

@@ -290,7 +290,7 @@ static inline const char *bond_3ad_churn_desc(churn_state_t state)
 }
 
 /* ========== AD Exported functions to the main bonding code ========== */
-void bond_3ad_initialize(struct bonding *bond, u16 tick_resolution);
+void bond_3ad_initialize(struct bonding *bond);
 void bond_3ad_bind_slave(struct slave *slave);
 void bond_3ad_unbind_slave(struct slave *slave);
 void bond_3ad_state_machine_handler(struct work_struct *);

tools/testing/selftests/Makefile

@@ -12,6 +12,7 @@ TARGETS += cpu-hotplug
 TARGETS += damon
 TARGETS += drivers/dma-buf
 TARGETS += drivers/s390x/uvdevice
+TARGETS += drivers/net/bonding
 TARGETS += efivarfs
 TARGETS += exec
 TARGETS += filesystems

tools/testing/selftests/drivers/net/bonding/Makefile

+# SPDX-License-Identifier: GPL-2.0
+# Makefile for net selftests
+
+TEST_PROGS := bond-break-lacpdu-tx.sh
+
+include ../../../lib.mk

tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh

+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+
+# Regression Test:
+#   Verify LACPDUs get transmitted after setting the MAC address of
+#   the bond.
+#
+# https://bugzilla.redhat.com/show_bug.cgi?id=2020773
+#
+#       +---------+
+#       | fab-br0 |
+#       +---------+
+#            |
+#       +---------+
+#       |  fbond  |
+#       +---------+
+#        |       |
+#    +------+ +------+
+#    |veth1 | |veth2 |
+#    +------+ +------+
+#
+# We use veths instead of physical interfaces
+
+set -e
+tmp=$(mktemp -q dump.XXXXXX)
+cleanup() {
+	ip link del fab-br0 >/dev/null 2>&1 || :
+	ip link del fbond  >/dev/null 2>&1 || :
+	ip link del veth1-bond  >/dev/null 2>&1 || :
+	ip link del veth2-bond  >/dev/null 2>&1 || :
+	modprobe -r bonding  >/dev/null 2>&1 || :
+	rm -f -- ${tmp}
+}
+
+trap cleanup 0 1 2
+cleanup
+sleep 1
+
+# create the bridge
+ip link add fab-br0 address 52:54:00:3B:7C:A6 mtu 1500 type bridge \
+	forward_delay 15
+
+# create the bond
+ip link add fbond type bond mode 4 miimon 200 xmit_hash_policy 1 \
+	ad_actor_sys_prio 65535 lacp_rate fast
+
+# set bond address
+ip link set fbond address 52:54:00:3B:7C:A6
+ip link set fbond up
+
+# set again bond sysfs parameters
+ip link set fbond type bond ad_actor_sys_prio 65535
+
+# create veths
+ip link add name veth1-bond type veth peer name veth1-end
+ip link add name veth2-bond type veth peer name veth2-end
+
+# add ports
+ip link set fbond master fab-br0
+ip link set veth1-bond down master fbond
+ip link set veth2-bond down master fbond
+
+# bring up
+ip link set veth1-end up
+ip link set veth2-end up
+ip link set fab-br0 up
+ip link set fbond up
+ip addr add dev fab-br0 10.0.0.3
+
+tcpdump -n -i veth1-end -e ether proto 0x8809 >${tmp} 2>&1 &
+sleep 15
+pkill tcpdump >/dev/null 2>&1
+rc=0
+num=$(grep "packets captured" ${tmp} | awk '{print $1}')
+if test "$num" -gt 0; then
+	echo "PASS, captured ${num}"
+else
+	echo "FAIL"
+	rc=1
+fi
+exit $rc

tools/testing/selftests/drivers/net/bonding/config

+CONFIG_BONDING=y

tools/testing/selftests/drivers/net/bonding/settings

+timeout=60