ARM: dts: colibri-imx6: Disable usb over-current

Disable usb over-current of the chipidea driver on all Carrier-Boards
used by Toradex. Do this as we don't want to use this functionality on
our Carrier Boards and to leave it open to someone who includes our
module-level device-trees.

Remove the now obsolete disable-over-current flag from module-level
device-tree imx6qdl-colibri.dtsi and leave it as already mentioned to
the people actually implementing the carrier-board to implement this.

This will prevent the warning "No over current polarity defined" from
being printed on boot.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx6dl-colibri-aster.dts

@@ -99,10 +99,12 @@ &uart3 {
 };
 
 &usbh1 {
+	disable-over-current;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts

@@ -111,10 +111,12 @@ &uart3 {
 };
 
 &usbh1 {
+	disable-over-current;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6dl-colibri-iris.dts

@@ -138,10 +138,12 @@ &uart3 {
 };
 
 &usbh1 {
+	disable-over-current;
 	status = "okay";
 };
 
 &usbotg {
+	disable-over-current;
 	status = "okay";
 };
 

arch/arm/boot/dts/imx6qdl-colibri.dtsi

@@ -684,7 +684,6 @@ &usbh1 {
 
 /* Colibri USBC */
 &usbotg {
-	disable-over-current;
 	dr_mode = "otg";
 	extcon = <0>, <&extcon_usbc_det>;
 	status = "disabled";