Merge branch 'dpaa2-add-1000base-x-support'

Russell King says:

====================
dpaa2: add 1000base-X support

This patch series adds 1000base-X support to pcs-lynx and DPAA2,
allowing runtime switching between SGMII and 1000base-X. This is
a pre-requisit for SFP module support on the SolidRun ComExpress 7.

v2: updated with Ioana's r-b's, and comment on backplane support
====================

Link: https://lore.kernel.org/r/20210205103859.GH1463@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h

@@ -695,7 +695,9 @@ static inline unsigned int dpaa2_eth_rx_head_room(struct dpaa2_eth_priv *priv)
 
 static inline bool dpaa2_eth_is_type_phy(struct dpaa2_eth_priv *priv)
 {
-	if (priv->mac && priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY)
+	if (priv->mac &&
+	    (priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
+	     priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
 		return true;
 
 	return false;

drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c

@@ -79,10 +79,20 @@ static bool dpaa2_mac_phy_mode_mismatch(struct dpaa2_mac *mac,
 					phy_interface_t interface)
 {
 	switch (interface) {
+	/* We can switch between SGMII and 1000BASE-X at runtime with
+	 * pcs-lynx
+	 */
+	case PHY_INTERFACE_MODE_SGMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
+		if (mac->pcs &&
+		    (mac->if_mode == PHY_INTERFACE_MODE_SGMII ||
+		     mac->if_mode == PHY_INTERFACE_MODE_1000BASEX))
+			return false;
+		return interface != mac->if_mode;
+
 	case PHY_INTERFACE_MODE_10GBASER:
 	case PHY_INTERFACE_MODE_USXGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
-	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
@@ -122,13 +132,17 @@ static void dpaa2_mac_validate(struct phylink_config *config,
 		fallthrough;
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
+	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_RGMII:
 	case PHY_INTERFACE_MODE_RGMII_ID:
 	case PHY_INTERFACE_MODE_RGMII_RXID:
 	case PHY_INTERFACE_MODE_RGMII_TXID:
-		phylink_set(mask, 10baseT_Full);
-		phylink_set(mask, 100baseT_Full);
+		phylink_set(mask, 1000baseX_Full);
 		phylink_set(mask, 1000baseT_Full);
+		if (state->interface == PHY_INTERFACE_MODE_1000BASEX)
+			break;
+		phylink_set(mask, 100baseT_Full);
+		phylink_set(mask, 10baseT_Full);
 		break;
 	default:
 		goto empty_set;
@@ -301,8 +315,9 @@ int dpaa2_mac_connect(struct dpaa2_mac *mac)
 		goto err_put_node;
 	}
 
-	if (mac->attr.link_type == DPMAC_LINK_TYPE_PHY &&
-	    mac->attr.eth_if != DPMAC_ETH_IF_RGMII) {
+	if ((mac->attr.link_type == DPMAC_LINK_TYPE_PHY &&
+	     mac->attr.eth_if != DPMAC_ETH_IF_RGMII) ||
+	    mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE) {
 		err = dpaa2_pcs_create(mac, dpmac_node, mac->attr.id);
 		if (err)
 			goto err_put_node;

drivers/net/pcs/pcs-lynx.c

@@ -11,6 +11,7 @@
 #define LINK_TIMER_VAL(ns)		((u32)((ns) / SGMII_CLOCK_PERIOD_NS))
 
 #define SGMII_AN_LINK_TIMER_NS		1600000 /* defined by SGMII spec */
+#define IEEE8023_LINK_TIMER_NS		10000000
 
 #define LINK_TIMER_LO			0x12
 #define LINK_TIMER_HI			0x13
@@ -83,6 +84,7 @@ static void lynx_pcs_get_state(struct phylink_pcs *pcs,
 	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
 
 	switch (state->interface) {
+	case PHY_INTERFACE_MODE_1000BASEX:
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
 		phylink_mii_c22_pcs_get_state(lynx->mdio, state);
@@ -108,6 +110,30 @@ static void lynx_pcs_get_state(struct phylink_pcs *pcs,
 		state->link, state->an_enabled, state->an_complete);
 }
 
+static int lynx_pcs_config_1000basex(struct mdio_device *pcs,
+				     unsigned int mode,
+				     const unsigned long *advertising)
+{
+	struct mii_bus *bus = pcs->bus;
+	int addr = pcs->addr;
+	u32 link_timer;
+	int err;
+
+	link_timer = LINK_TIMER_VAL(IEEE8023_LINK_TIMER_NS);
+	mdiobus_write(bus, addr, LINK_TIMER_LO, link_timer & 0xffff);
+	mdiobus_write(bus, addr, LINK_TIMER_HI, link_timer >> 16);
+
+	err = mdiobus_modify(bus, addr, IF_MODE,
+			     IF_MODE_SGMII_EN | IF_MODE_USE_SGMII_AN,
+			     0);
+	if (err)
+		return err;
+
+	return phylink_mii_c22_pcs_config(pcs, mode,
+					  PHY_INTERFACE_MODE_1000BASEX,
+					  advertising);
+}
+
 static int lynx_pcs_config_sgmii(struct mdio_device *pcs, unsigned int mode,
 				 const unsigned long *advertising)
 {
@@ -163,6 +189,8 @@ static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
 
 	switch (ifmode) {
+	case PHY_INTERFACE_MODE_1000BASEX:
+		return lynx_pcs_config_1000basex(lynx->mdio, mode, advertising);
 	case PHY_INTERFACE_MODE_SGMII:
 	case PHY_INTERFACE_MODE_QSGMII:
 		return lynx_pcs_config_sgmii(lynx->mdio, mode, advertising);
@@ -185,6 +213,13 @@ static int lynx_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 	return 0;
 }
 
+static void lynx_pcs_an_restart(struct phylink_pcs *pcs)
+{
+	struct lynx_pcs *lynx = phylink_pcs_to_lynx(pcs);
+
+	phylink_mii_c22_pcs_an_restart(lynx->mdio);
+}
+
 static void lynx_pcs_link_up_sgmii(struct mdio_device *pcs, unsigned int mode,
 				   int speed, int duplex)
 {
@@ -290,6 +325,7 @@ static void lynx_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
 static const struct phylink_pcs_ops lynx_pcs_phylink_ops = {
 	.pcs_get_state = lynx_pcs_get_state,
 	.pcs_config = lynx_pcs_config,
+	.pcs_an_restart = lynx_pcs_an_restart,
 	.pcs_link_up = lynx_pcs_link_up,
 };