staging: comedi: ni_labpc: move register defs to new file

The new "ni_labpc_isadma" module will need to access some register
definitions from "ni_labpc.c", which is not part of the module's source.
Move all the register definitions into a new, common header file
"ni_labpc_regs.h".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/ni_labpc.c

@@ -71,75 +71,9 @@
 #include "8255.h"
 #include "comedi_fc.h"
 #include "ni_labpc.h"
+#include "ni_labpc_regs.h"
 #include "ni_labpc_isadma.h"
 
-/*
- * Register map (all registers are 8-bit)
- */
-#define STAT1_REG		0x00	/* R: Status 1 reg */
-#define STAT1_DAVAIL		(1 << 0)
-#define STAT1_OVERRUN		(1 << 1)
-#define STAT1_OVERFLOW		(1 << 2)
-#define STAT1_CNTINT		(1 << 3)
-#define STAT1_GATA0		(1 << 5)
-#define STAT1_EXTGATA0		(1 << 6)
-#define CMD1_REG		0x00	/* W: Command 1 reg */
-#define CMD1_MA(x)		(((x) & 0x7) << 0)
-#define CMD1_TWOSCMP		(1 << 3)
-#define CMD1_GAIN(x)		(((x) & 0x7) << 4)
-#define CMD1_SCANEN		(1 << 7)
-#define CMD2_REG		0x01	/* W: Command 2 reg */
-#define CMD2_PRETRIG		(1 << 0)
-#define CMD2_HWTRIG		(1 << 1)
-#define CMD2_SWTRIG		(1 << 2)
-#define CMD2_TBSEL		(1 << 3)
-#define CMD2_2SDAC0		(1 << 4)
-#define CMD2_2SDAC1		(1 << 5)
-#define CMD2_LDAC(x)		(1 << (6 + (x)))
-#define CMD3_REG		0x02	/* W: Command 3 reg */
-#define CMD3_DMAEN		(1 << 0)
-#define CMD3_DIOINTEN		(1 << 1)
-#define CMD3_DMATCINTEN		(1 << 2)
-#define CMD3_CNTINTEN		(1 << 3)
-#define CMD3_ERRINTEN		(1 << 4)
-#define CMD3_FIFOINTEN		(1 << 5)
-#define ADC_START_CONVERT_REG	0x03	/* W: Start Convert reg */
-#define DAC_LSB_REG(x)		(0x04 + 2 * (x)) /* W: DAC0/1 LSB reg */
-#define DAC_MSB_REG(x)		(0x05 + 2 * (x)) /* W: DAC0/1 MSB reg */
-#define ADC_FIFO_CLEAR_REG	0x08	/* W: A/D FIFO Clear reg */
-#define ADC_FIFO_REG		0x0a	/* R: A/D FIFO reg */
-#define DMATC_CLEAR_REG		0x0a	/* W: DMA Interrupt Clear reg */
-#define TIMER_CLEAR_REG		0x0c	/* W: Timer Interrupt Clear reg */
-#define CMD6_REG		0x0e	/* W: Command 6 reg */
-#define CMD6_NRSE		(1 << 0)
-#define CMD6_ADCUNI		(1 << 1)
-#define CMD6_DACUNI(x)		(1 << (2 + (x)))
-#define CMD6_HFINTEN		(1 << 5)
-#define CMD6_DQINTEN		(1 << 6)
-#define CMD6_SCANUP		(1 << 7)
-#define CMD4_REG		0x0f	/* W: Command 3 reg */
-#define CMD4_INTSCAN		(1 << 0)
-#define CMD4_EOIRCV		(1 << 1)
-#define CMD4_ECLKDRV		(1 << 2)
-#define CMD4_SEDIFF		(1 << 3)
-#define CMD4_ECLKRCV		(1 << 4)
-#define DIO_BASE_REG		0x10	/* R/W: 8255 DIO base reg */
-#define COUNTER_A_BASE_REG	0x14	/* R/W: 8253 Counter A base reg */
-#define COUNTER_B_BASE_REG	0x18	/* R/W: 8253 Counter B base reg */
-#define CMD5_REG		0x1c	/* W: Command 5 reg */
-#define CMD5_WRTPRT		(1 << 2)
-#define CMD5_DITHEREN		(1 << 3)
-#define CMD5_CALDACLD		(1 << 4)
-#define CMD5_SCLK		(1 << 5)
-#define CMD5_SDATA		(1 << 6)
-#define CMD5_EEPROMCS		(1 << 7)
-#define STAT2_REG		0x1d	/* R: Status 2 reg */
-#define STAT2_PROMOUT		(1 << 0)
-#define STAT2_OUTA1		(1 << 1)
-#define STAT2_FIFONHF		(1 << 2)
-#define INTERVAL_COUNT_REG	0x1e	/* W: Interval Counter Data reg */
-#define INTERVAL_STROBE_REG	0x1f	/* W: Interval Counter Strobe reg */
-
 #define LABPC_SIZE		0x20	/* size of ISA io region */
 #define LABPC_TIMER_BASE	500	/* 2 MHz master clock */
 #define LABPC_ADC_TIMEOUT	1000

drivers/staging/comedi/drivers/ni_labpc_isadma.c

@@ -24,6 +24,7 @@
 #include <asm/dma.h>
 
 #include "ni_labpc.h"
+#include "ni_labpc_regs.h"
 #include "ni_labpc_isadma.h"
 
 /* size in bytes of dma buffer */

drivers/staging/comedi/drivers/ni_labpc_regs.h

+/*
+ * ni_labpc register definitions.
+*/
+
+#ifndef _NI_LABPC_REGS_H
+#define _NI_LABPC_REGS_H
+
+/*
+ * Register map (all registers are 8-bit)
+ */
+#define STAT1_REG		0x00	/* R: Status 1 reg */
+#define STAT1_DAVAIL		(1 << 0)
+#define STAT1_OVERRUN		(1 << 1)
+#define STAT1_OVERFLOW		(1 << 2)
+#define STAT1_CNTINT		(1 << 3)
+#define STAT1_GATA0		(1 << 5)
+#define STAT1_EXTGATA0		(1 << 6)
+#define CMD1_REG		0x00	/* W: Command 1 reg */
+#define CMD1_MA(x)		(((x) & 0x7) << 0)
+#define CMD1_TWOSCMP		(1 << 3)
+#define CMD1_GAIN(x)		(((x) & 0x7) << 4)
+#define CMD1_SCANEN		(1 << 7)
+#define CMD2_REG		0x01	/* W: Command 2 reg */
+#define CMD2_PRETRIG		(1 << 0)
+#define CMD2_HWTRIG		(1 << 1)
+#define CMD2_SWTRIG		(1 << 2)
+#define CMD2_TBSEL		(1 << 3)
+#define CMD2_2SDAC0		(1 << 4)
+#define CMD2_2SDAC1		(1 << 5)
+#define CMD2_LDAC(x)		(1 << (6 + (x)))
+#define CMD3_REG		0x02	/* W: Command 3 reg */
+#define CMD3_DMAEN		(1 << 0)
+#define CMD3_DIOINTEN		(1 << 1)
+#define CMD3_DMATCINTEN		(1 << 2)
+#define CMD3_CNTINTEN		(1 << 3)
+#define CMD3_ERRINTEN		(1 << 4)
+#define CMD3_FIFOINTEN		(1 << 5)
+#define ADC_START_CONVERT_REG	0x03	/* W: Start Convert reg */
+#define DAC_LSB_REG(x)		(0x04 + 2 * (x)) /* W: DAC0/1 LSB reg */
+#define DAC_MSB_REG(x)		(0x05 + 2 * (x)) /* W: DAC0/1 MSB reg */
+#define ADC_FIFO_CLEAR_REG	0x08	/* W: A/D FIFO Clear reg */
+#define ADC_FIFO_REG		0x0a	/* R: A/D FIFO reg */
+#define DMATC_CLEAR_REG		0x0a	/* W: DMA Interrupt Clear reg */
+#define TIMER_CLEAR_REG		0x0c	/* W: Timer Interrupt Clear reg */
+#define CMD6_REG		0x0e	/* W: Command 6 reg */
+#define CMD6_NRSE		(1 << 0)
+#define CMD6_ADCUNI		(1 << 1)
+#define CMD6_DACUNI(x)		(1 << (2 + (x)))
+#define CMD6_HFINTEN		(1 << 5)
+#define CMD6_DQINTEN		(1 << 6)
+#define CMD6_SCANUP		(1 << 7)
+#define CMD4_REG		0x0f	/* W: Command 3 reg */
+#define CMD4_INTSCAN		(1 << 0)
+#define CMD4_EOIRCV		(1 << 1)
+#define CMD4_ECLKDRV		(1 << 2)
+#define CMD4_SEDIFF		(1 << 3)
+#define CMD4_ECLKRCV		(1 << 4)
+#define DIO_BASE_REG		0x10	/* R/W: 8255 DIO base reg */
+#define COUNTER_A_BASE_REG	0x14	/* R/W: 8253 Counter A base reg */
+#define COUNTER_B_BASE_REG	0x18	/* R/W: 8253 Counter B base reg */
+#define CMD5_REG		0x1c	/* W: Command 5 reg */
+#define CMD5_WRTPRT		(1 << 2)
+#define CMD5_DITHEREN		(1 << 3)
+#define CMD5_CALDACLD		(1 << 4)
+#define CMD5_SCLK		(1 << 5)
+#define CMD5_SDATA		(1 << 6)
+#define CMD5_EEPROMCS		(1 << 7)
+#define STAT2_REG		0x1d	/* R: Status 2 reg */
+#define STAT2_PROMOUT		(1 << 0)
+#define STAT2_OUTA1		(1 << 1)
+#define STAT2_FIFONHF		(1 << 2)
+#define INTERVAL_COUNT_REG	0x1e	/* W: Interval Counter Data reg */
+#define INTERVAL_STROBE_REG	0x1f	/* W: Interval Counter Strobe reg */
+
+#endif /* _NI_LABPC_REGS_H */