pwm: sun4i: Fix incorrect calculation of duty_cycle/period

Since 5.4-rc1, pwm_apply_state calls ->get_state after ->apply
if available, and this revealed an issue with integer precision
when calculating duty_cycle and period for the currently set
state in ->get_state callback.

This issue manifested in broken backlight on several Allwinner
based devices.

Previously this worked, because ->apply updated the passed state
directly.

Fixes: deb9c462 ("pwm: sun4i: Don't update the state for the caller of pwm_apply_state")
Signed-off-by: Ondrej Jirman <megous@megous.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>

drivers/pwm/pwm-sun4i.c

@@ -137,10 +137,10 @@ static void sun4i_pwm_get_state(struct pwm_chip *chip,
 
 	val = sun4i_pwm_readl(sun4i_pwm, PWM_CH_PRD(pwm->hwpwm));
 
-	tmp = prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
+	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_DTY(val);
 	state->duty_cycle = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
 
-	tmp = prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
+	tmp = (u64)prescaler * NSEC_PER_SEC * PWM_REG_PRD(val);
 	state->period = DIV_ROUND_CLOSEST_ULL(tmp, clk_rate);
 }