Commit 51045ecf authored by Todd Fujinaka's avatar Todd Fujinaka Committed by Jeff Kirsher

igb: add support for 1512 PHY

This patch adds support for Marvell PHY 1512 (required for I354).

Submitted by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: default avatarTodd Fujinaka <todd.fujinaka@intel.com>
Tested-by: default avatarAaron Brown <aaron.f.brown@intel.com>
Signed-off-by: default avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
parent 30c72916
......@@ -231,6 +231,7 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
/* Verify phy id and set remaining function pointers */
switch (phy->id) {
case M88E1543_E_PHY_ID:
case M88E1512_E_PHY_ID:
case I347AT4_E_PHY_ID:
case M88E1112_E_PHY_ID:
case M88E1111_I_PHY_ID:
......@@ -243,7 +244,7 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
else
phy->ops.get_cable_length = igb_get_cable_length_m88;
phy->ops.force_speed_duplex = igb_phy_force_speed_duplex_m88;
/* Check if this PHY is confgured for media swap. */
/* Check if this PHY is configured for media swap. */
if (phy->id == M88E1112_E_PHY_ID) {
u16 data;
......@@ -266,6 +267,11 @@ static s32 igb_init_phy_params_82575(struct e1000_hw *hw)
hw->mac.ops.check_for_link =
igb_check_for_link_media_swap;
}
if (phy->id == M88E1512_E_PHY_ID) {
ret_val = igb_initialize_M88E1512_phy(hw);
if (ret_val)
goto out;
}
break;
case IGP03E1000_E_PHY_ID:
phy->type = e1000_phy_igp_3;
......@@ -897,6 +903,7 @@ static s32 igb_get_phy_id_82575(struct e1000_hw *hw)
**/
static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
/* This isn't a true "hard" reset, but is the only reset
......@@ -913,7 +920,11 @@ static s32 igb_phy_hw_reset_sgmii_82575(struct e1000_hw *hw)
goto out;
ret_val = igb_phy_sw_reset(hw);
if (ret_val)
goto out;
if (phy->id == M88E1512_E_PHY_ID)
ret_val = igb_initialize_M88E1512_phy(hw);
out:
return ret_val;
}
......@@ -1587,6 +1598,7 @@ static s32 igb_setup_copper_link_82575(struct e1000_hw *hw)
case I347AT4_E_PHY_ID:
case M88E1112_E_PHY_ID:
case M88E1543_E_PHY_ID:
case M88E1512_E_PHY_ID:
case I210_I_PHY_ID:
ret_val = igb_copper_link_setup_m88_gen2(hw);
break;
......@@ -2629,7 +2641,8 @@ s32 igb_set_eee_i354(struct e1000_hw *hw, bool adv1G, bool adv100M)
u16 phy_data;
if ((hw->phy.media_type != e1000_media_type_copper) ||
(phy->id != M88E1543_E_PHY_ID))
((phy->id != M88E1543_E_PHY_ID) &&
(phy->id != M88E1512_E_PHY_ID)))
goto out;
if (!hw->dev_spec._82575.eee_disable) {
......@@ -2709,7 +2722,8 @@ s32 igb_get_eee_status_i354(struct e1000_hw *hw, bool *status)
/* Check if EEE is supported on this device. */
if ((hw->phy.media_type != e1000_media_type_copper) ||
(phy->id != M88E1543_E_PHY_ID))
((phy->id != M88E1543_E_PHY_ID) &&
(phy->id != M88E1512_E_PHY_ID)))
goto out;
ret_val = igb_read_xmdio_reg(hw, E1000_PCS_STATUS_ADDR_I354,
......
......@@ -604,6 +604,10 @@
#define E1000_M88E1112_MAC_CTRL_1_MODE_SHIFT 7
#define E1000_M88E1112_PAGE_ADDR 0x16
#define E1000_M88E1112_STATUS 0x01
#define E1000_M88E1512_CFG_REG_1 0x0010
#define E1000_M88E1512_CFG_REG_2 0x0011
#define E1000_M88E1512_CFG_REG_3 0x0007
#define E1000_M88E1512_MODE 0x0014
/* PCI Express Control */
#define E1000_GCR_CMPL_TMOUT_MASK 0x0000F000
......@@ -861,6 +865,7 @@
#define M88_VENDOR 0x0141
#define I210_I_PHY_ID 0x01410C00
#define M88E1543_E_PHY_ID 0x01410EA0
#define M88E1512_E_PHY_ID 0x01410DD0
/* M88E1000 Specific Registers */
#define M88E1000_PHY_SPEC_CTRL 0x10 /* PHY Specific Control Register */
......
......@@ -1262,6 +1262,8 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
switch (hw->phy.id) {
case I347AT4_E_PHY_ID:
case M88E1112_E_PHY_ID:
case M88E1543_E_PHY_ID:
case M88E1512_E_PHY_ID:
case I210_I_PHY_ID:
reset_dsp = false;
break;
......@@ -1270,9 +1272,9 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
reset_dsp = false;
break;
}
if (!reset_dsp)
if (!reset_dsp) {
hw_dbg("Link taking longer than expected.\n");
else {
} else {
/* We didn't get link.
* Reset the DSP and cross our fingers.
*/
......@@ -1297,6 +1299,8 @@ s32 igb_phy_force_speed_duplex_m88(struct e1000_hw *hw)
if (hw->phy.type != e1000_phy_m88 ||
hw->phy.id == I347AT4_E_PHY_ID ||
hw->phy.id == M88E1112_E_PHY_ID ||
hw->phy.id == M88E1543_E_PHY_ID ||
hw->phy.id == M88E1512_E_PHY_ID ||
hw->phy.id == I210_I_PHY_ID)
goto out;
......@@ -1737,6 +1741,7 @@ s32 igb_get_cable_length_m88_gen2(struct e1000_hw *hw)
phy->cable_length = phy_data / (is_cm ? 100 : 1);
break;
case M88E1543_E_PHY_ID:
case M88E1512_E_PHY_ID:
case I347AT4_E_PHY_ID:
/* Remember the original page select and set it to 7 */
ret_val = phy->ops.read_reg(hw, I347AT4_PAGE_SELECT,
......@@ -2188,6 +2193,90 @@ s32 igb_phy_init_script_igp3(struct e1000_hw *hw)
return 0;
}
/**
* igb_initialize_M88E1512_phy - Initialize M88E1512 PHY
* @hw: pointer to the HW structure
*
* Initialize Marvel 1512 to work correctly with Avoton.
**/
s32 igb_initialize_M88E1512_phy(struct e1000_hw *hw)
{
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val = 0;
/* Switch to PHY page 0xFF. */
ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FF);
if (ret_val)
goto out;
ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x214B);
if (ret_val)
goto out;
ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2144);
if (ret_val)
goto out;
ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0x0C28);
if (ret_val)
goto out;
ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2146);
if (ret_val)
goto out;
ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xB233);
if (ret_val)
goto out;
ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x214D);
if (ret_val)
goto out;
ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_2, 0xCC0C);
if (ret_val)
goto out;
ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_1, 0x2159);
if (ret_val)
goto out;
/* Switch to PHY page 0xFB. */
ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x00FB);
if (ret_val)
goto out;
ret_val = phy->ops.write_reg(hw, E1000_M88E1512_CFG_REG_3, 0x000D);
if (ret_val)
goto out;
/* Switch to PHY page 0x12. */
ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0x12);
if (ret_val)
goto out;
/* Change mode to SGMII-to-Copper */
ret_val = phy->ops.write_reg(hw, E1000_M88E1512_MODE, 0x8001);
if (ret_val)
goto out;
/* Return the PHY to page 0. */
ret_val = phy->ops.write_reg(hw, E1000_M88E1543_PAGE_ADDR, 0);
if (ret_val)
goto out;
ret_val = igb_phy_sw_reset(hw);
if (ret_val) {
hw_dbg("Error committing the PHY changes\n");
return ret_val;
}
/* msec_delay(1000); */
usleep_range(1000, 2000);
out:
return ret_val;
}
/**
* igb_power_up_phy_copper - Restore copper link in case of PHY power down
* @hw: pointer to the HW structure
......
......@@ -61,6 +61,7 @@ s32 igb_phy_has_link(struct e1000_hw *hw, u32 iterations,
void igb_power_up_phy_copper(struct e1000_hw *hw);
void igb_power_down_phy_copper(struct e1000_hw *hw);
s32 igb_phy_init_script_igp3(struct e1000_hw *hw);
s32 igb_initialize_M88E1512_phy(struct e1000_hw *hw);
s32 igb_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
s32 igb_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
s32 igb_read_phy_reg_i2c(struct e1000_hw *hw, u32 offset, u16 *data);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment