usb: typec: ucsi: don't print PPM init deferred errors

ucsi_init() may be deferred as usb_role_sw may be deferred in
ucsi_register_port(). This results in several PPM init failed (-517)
messages maybe printed several times upon boot, like on stm32mp135f-dk
board, until the role_switch driver gets probed.

[   19.880945] dwc2 49000000.usb: supply vusb_d not found, using dummy regulator
[   19.887136] dwc2 49000000.usb: supply vusb_a not found, using dummy regulator
[   19.975432] ucsi-stm32g0-i2c 0-0053: PPM init failed (-517)
[   20.155746] dwc2 49000000.usb: EPs: 9, dedicated fifos, 952 entries in SPRAM
[   20.175429] ucsi-stm32g0-i2c 0-0053: PPM init failed (-517)
[   20.184242] dwc2 49000000.usb: DWC OTG Controller

Adopt dev_err_probe() instead of dev_err(), to only print other errors.
Also print an error in case the wait count has expired.
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20230412161734.3425090-1-fabrice.gasnier@foss.st.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/typec/ucsi/ucsi.c

@@ -1444,11 +1444,13 @@ static void ucsi_init_work(struct work_struct *work)
 
 	ret = ucsi_init(ucsi);
 	if (ret)
-		dev_err(ucsi->dev, "PPM init failed (%d)\n", ret);
+		dev_err_probe(ucsi->dev, ret, "PPM init failed\n");
 
 	if (ret == -EPROBE_DEFER) {
-		if (ucsi->work_count++ > UCSI_ROLE_SWITCH_WAIT_COUNT)
+		if (ucsi->work_count++ > UCSI_ROLE_SWITCH_WAIT_COUNT) {
+			dev_err(ucsi->dev, "PPM init failed, stop trying\n");
 			return;
+		}
 
 		queue_delayed_work(system_long_wq, &ucsi->work,
 				   UCSI_ROLE_SWITCH_INTERVAL);