Commit 5150ec3f authored by Andreas Klinger's avatar Andreas Klinger Committed by Jonathan Cameron

avia-hx711.yaml: transform DT binding to YAML

replace avia-hx711.txt by avia-hx711.yaml as yaml devicetree
documentation for avia hx711 iio adc sensor
Signed-off-by: default avatarAndreas Klinger <ak@it-klinger.de>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarJonathan Cameron <Jonathan.Cameron@huawei.com>
parent a8427a7b
* AVIA HX711 ADC chip for weight cells
Bit-banging driver
Required properties:
- compatible: Should be "avia,hx711"
- sck-gpios: Definition of the GPIO for the clock
- dout-gpios: Definition of the GPIO for data-out
See Documentation/devicetree/bindings/gpio/gpio.txt
- avdd-supply: Definition of the regulator used as analog supply
Optional properties:
- clock-frequency: Frequency of PD_SCK in Hz
Minimum value allowed is 10 kHz because of maximum
high time of 50 microseconds.
Example:
weight {
compatible = "avia,hx711";
sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
avdd-suppy = <&avdd>;
clock-frequency = <100000>;
};
# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
title: AVIA HX711 ADC chip for weight cells
maintainers:
- Andreas Klinger <ak@it-klinger.de>
description: |
Bit-banging driver using two GPIOs:
- sck-gpio gives a clock to the sensor with 24 cycles for data retrieval
and up to 3 cycles for selection of the input channel and gain for the
next measurement
- dout-gpio is the sensor data the sensor responds to the clock
Specifications about the driver can be found at:
http://www.aviaic.com/ENProducts.aspx
properties:
compatible:
enum:
- avia,hx711
sck-gpios:
description:
Definition of the GPIO for the clock (output). In the datasheet it is
named PD_SCK
maxItems: 1
dout-gpios:
description:
Definition of the GPIO for the data-out sent by the sensor in
response to the clock (input).
See Documentation/devicetree/bindings/gpio/gpio.txt for information
on how to specify a consumer gpio.
maxItems: 1
avdd-supply:
description:
Definition of the regulator used as analog supply
maxItems: 1
clock-frequency:
minimum: 20000
maximum: 2500000
default: 400000
required:
- compatible
- sck-gpios
- dout-gpios
- avdd-supply
examples:
- |
#include <dt-bindings/gpio/gpio.h>
weight {
compatible = "avia,hx711";
sck-gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
dout-gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
avdd-suppy = <&avdd>;
clock-frequency = <100000>;
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment