Commit 51754572 authored by Guo-Fu Tseng's avatar Guo-Fu Tseng Committed by David S. Miller

jme: Rename phyfifo function for easier understand

Signed-off-by: default avatarGuo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 3c2368d9
...@@ -336,13 +336,13 @@ jme_linkstat_from_phy(struct jme_adapter *jme) ...@@ -336,13 +336,13 @@ jme_linkstat_from_phy(struct jme_adapter *jme)
} }
static inline void static inline void
jme_set_phyfifoa(struct jme_adapter *jme) jme_set_phyfifo_5level(struct jme_adapter *jme)
{ {
jme_mdio_write(jme->dev, jme->mii_if.phy_id, 27, 0x0004); jme_mdio_write(jme->dev, jme->mii_if.phy_id, 27, 0x0004);
} }
static inline void static inline void
jme_set_phyfifob(struct jme_adapter *jme) jme_set_phyfifo_8level(struct jme_adapter *jme)
{ {
jme_mdio_write(jme->dev, jme->mii_if.phy_id, 27, 0x0000); jme_mdio_write(jme->dev, jme->mii_if.phy_id, 27, 0x0000);
} }
...@@ -457,15 +457,15 @@ jme_check_link(struct net_device *netdev, int testonly) ...@@ -457,15 +457,15 @@ jme_check_link(struct net_device *netdev, int testonly)
gpreg1 |= GPREG1_HALFMODEPATCH; gpreg1 |= GPREG1_HALFMODEPATCH;
switch (phylink & PHY_LINK_SPEED_MASK) { switch (phylink & PHY_LINK_SPEED_MASK) {
case PHY_LINK_SPEED_10M: case PHY_LINK_SPEED_10M:
jme_set_phyfifoa(jme); jme_set_phyfifo_8level(jme);
gpreg1 |= GPREG1_RSSPATCH; gpreg1 |= GPREG1_RSSPATCH;
break; break;
case PHY_LINK_SPEED_100M: case PHY_LINK_SPEED_100M:
jme_set_phyfifob(jme); jme_set_phyfifo_5level(jme);
gpreg1 |= GPREG1_RSSPATCH; gpreg1 |= GPREG1_RSSPATCH;
break; break;
case PHY_LINK_SPEED_1000M: case PHY_LINK_SPEED_1000M:
jme_set_phyfifoa(jme); jme_set_phyfifo_8level(jme);
break; break;
default: default:
break; break;
...@@ -2979,7 +2979,7 @@ jme_init_one(struct pci_dev *pdev, ...@@ -2979,7 +2979,7 @@ jme_init_one(struct pci_dev *pdev,
jme->mii_if.mdio_write = jme_mdio_write; jme->mii_if.mdio_write = jme_mdio_write;
jme_clear_pm(jme); jme_clear_pm(jme);
jme_set_phyfifoa(jme); jme_set_phyfifo_5level(jme);
pci_read_config_byte(pdev, PCI_REVISION_ID, &jme->pcirev); pci_read_config_byte(pdev, PCI_REVISION_ID, &jme->pcirev);
if (!jme->fpgaver) if (!jme->fpgaver)
jme_phy_init(jme); jme_phy_init(jme);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment