Commit 517bcde2 authored by Krzysztof Kozlowski's avatar Krzysztof Kozlowski Committed by Rob Herring

dt-bindings: sram: Merge Allwinner SRAM bindings into generic

The Allwinner SRAM bindings list only compatible so integrate them into
generic SRAM bindings schema.
Signed-off-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: default avatarRob Herring <robh@kernel.org>
parent 1a4d47af
Allwinner SRAM for smp bringup:
------------------------------------------------
Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
primary core (cpu0). Once the core gets powered up it checks if a magic
value is set at a specific location. If it is then the BROM will jump
to the software entry address, instead of executing a standard boot.
Therefore a reserved section sub-node has to be added to the mmio-sram
declaration.
Note that this is separate from the Allwinner SRAM controller found in
../../sram/sunxi-sram.txt. This SRAM is secure only and not mappable to
any device.
Also there are no "secure-only" properties. The implementation should
check if this SRAM is usable first.
Required sub-node properties:
- compatible : depending on the SoC this should be one of:
"allwinner,sun9i-a80-smp-sram"
The rest of the properties should follow the generic mmio-sram discription
found in ../../misc/sram.txt
Example:
sram_b: sram@20000 {
/* 256 KiB secure SRAM at 0x20000 */
compatible = "mmio-sram";
reg = <0x00020000 0x40000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00020000 0x40000>;
smp-sram@1000 {
/*
* This is checked by BROM to determine if
* cpu0 should jump to SMP entry vector
*/
compatible = "allwinner,sun9i-a80-smp-sram";
reg = <0x1000 0x8>;
};
};
...@@ -65,6 +65,7 @@ patternProperties: ...@@ -65,6 +65,7 @@ patternProperties:
Should contain a vendor specific string in the form Should contain a vendor specific string in the form
<vendor>,[<device>-]<usage> <vendor>,[<device>-]<usage>
enum: enum:
- allwinner,sun9i-a80-smp-sram
- amlogic,meson8-smp-sram - amlogic,meson8-smp-sram
- amlogic,meson8b-smp-sram - amlogic,meson8b-smp-sram
- renesas,smp-sram - renesas,smp-sram
...@@ -215,3 +216,27 @@ examples: ...@@ -215,3 +216,27 @@ examples:
reg = <0x10080000 0x50>; reg = <0x10080000 0x50>;
}; };
}; };
- |
// Allwinner's A80 SoC uses part of the secure sram for hotplugging of the
// primary core (cpu0). Once the core gets powered up it checks if a magic
// value is set at a specific location. If it is then the BROM will jump
// to the software entry address, instead of executing a standard boot.
//
// Also there are no "secure-only" properties. The implementation should
// check if this SRAM is usable first.
sram@20000 {
// 256 KiB secure SRAM at 0x20000
compatible = "mmio-sram";
reg = <0x00020000 0x40000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0x00020000 0x40000>;
smp-sram@1000 {
// This is checked by BROM to determine if
// cpu0 should jump to SMP entry vector
compatible = "allwinner,sun9i-a80-smp-sram";
reg = <0x1000 0x8>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment