Merge tag 'mac80211-next-for-davem-2016-02-26' into next2

Here's another round of updates for -next:
 * big A-MSDU RX performance improvement (avoid linearize of paged RX)
 * rfkill changes: cleanups, documentation, platform properties
 * basic PBSS support in cfg80211
 * MU-MIMO action frame processing support
 * BlockAck reordering & duplicate detection offload support
 * various cleanups & little fixes

Documentation/ABI/obsolete/sysfs-class-rfkill → Documentation/ABI/removed/sysfs-class-rfkill

@@ -2,28 +2,12 @@ rfkill - radio frequency (RF) connector kill switch support
 
 For details to this subsystem look at Documentation/rfkill.txt.
 
-What:		/sys/class/rfkill/rfkill[0-9]+/state
-Date:		09-Jul-2007
-KernelVersion	v2.6.22
-Contact:	linux-wireless@vger.kernel.org
-Description: 	Current state of the transmitter.
-		This file is deprecated and scheduled to be removed in 2014,
-		because its not possible to express the 'soft and hard block'
-		state of the rfkill driver.
-Values: 	A numeric value.
-		0: RFKILL_STATE_SOFT_BLOCKED
-			transmitter is turned off by software
-		1: RFKILL_STATE_UNBLOCKED
-			transmitter is (potentially) active
-		2: RFKILL_STATE_HARD_BLOCKED
-			transmitter is forced off by something outside of
-			the driver's control.
-
 What:		/sys/class/rfkill/rfkill[0-9]+/claim
 Date:		09-Jul-2007
 KernelVersion	v2.6.22
 Contact:	linux-wireless@vger.kernel.org
-Description:	This file is deprecated because there no longer is a way to
+Description:	This file was deprecated because there no longer was a way to
 		claim just control over a single rfkill instance.
-		This file is scheduled to be removed in 2012.
+		This file was scheduled to be removed in 2012, and was removed
+		in 2016.
 Values: 	0: Kernel handles events

Documentation/ABI/stable/sysfs-class-rfkill

@@ -2,9 +2,8 @@ rfkill - radio frequency (RF) connector kill switch support
 
 For details to this subsystem look at Documentation/rfkill.txt.
 
-For the deprecated /sys/class/rfkill/*/state and
-/sys/class/rfkill/*/claim knobs of this interface look in
-Documentation/ABI/obsolete/sysfs-class-rfkill.
+For the deprecated /sys/class/rfkill/*/claim knobs of this interface look in
+Documentation/ABI/removed/sysfs-class-rfkill.
 
 What: 		/sys/class/rfkill
 Date:		09-Jul-2007
@@ -42,6 +41,28 @@ Values: 	A numeric value.
 		1: true
 
 
+What:		/sys/class/rfkill/rfkill[0-9]+/state
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Current state of the transmitter.
+		This file was scheduled to be removed in 2014, but due to its
+		large number of users it will be sticking around for a bit
+		longer. Despite it being marked as stabe, the newer "hard" and
+		"soft" interfaces should be preffered, since it is not possible
+		to express the 'soft and hard block' state of the rfkill driver
+		through this interface. There will likely be another attempt to
+		remove it in the future.
+Values: 	A numeric value.
+		0: RFKILL_STATE_SOFT_BLOCKED
+			transmitter is turned off by software
+		1: RFKILL_STATE_UNBLOCKED
+			transmitter is (potentially) active
+		2: RFKILL_STATE_HARD_BLOCKED
+			transmitter is forced off by something outside of
+			the driver's control.
+
+
 What:		/sys/class/rfkill/rfkill[0-9]+/hard
 Date:		12-March-2010
 KernelVersion	v2.6.34

Documentation/cgroups/00-INDEX → Documentation/cgroup-v1/00-INDEX

@@ -24,7 +24,5 @@ net_prio.txt
 	- Network priority cgroups details and usages.
 pids.txt
 	- Process number cgroups details and usages.
-resource_counter.txt
-	- Resource Counter API.
 unified-hierarchy.txt
 	- Description the new/next cgroup interface.

Documentation/cgroups/blkio-controller.txt → Documentation/cgroup-v1/blkio-controller.txt

@@ -84,8 +84,7 @@ Throttling/Upper Limit policy
 
 - Run dd to read a file and see if rate is throttled to 1MB/s or not.
 
-		# dd if=/mnt/common/zerofile of=/dev/null bs=4K count=1024
-		# iflag=direct
+        # dd iflag=direct if=/mnt/common/zerofile of=/dev/null bs=4K count=1024
         1024+0 records in
         1024+0 records out
         4194304 bytes (4.2 MB) copied, 4.0001 s, 1.0 MB/s
@@ -374,82 +373,3 @@ One can experience an overall throughput drop if you have created multiple
 groups and put applications in that group which are not driving enough
 IO to keep disk busy. In that case set group_idle=0, and CFQ will not idle
 on individual groups and throughput should improve.
-
-Writeback
-=========
-
-Page cache is dirtied through buffered writes and shared mmaps and
-written asynchronously to the backing filesystem by the writeback
-mechanism.  Writeback sits between the memory and IO domains and
-regulates the proportion of dirty memory by balancing dirtying and
-write IOs.
-
-On traditional cgroup hierarchies, relationships between different
-controllers cannot be established making it impossible for writeback
-to operate accounting for cgroup resource restrictions and all
-writeback IOs are attributed to the root cgroup.
-
-If both the blkio and memory controllers are used on the v2 hierarchy
-and the filesystem supports cgroup writeback, writeback operations
-correctly follow the resource restrictions imposed by both memory and
-blkio controllers.
-
-Writeback examines both system-wide and per-cgroup dirty memory status
-and enforces the more restrictive of the two.  Also, writeback control
-parameters which are absolute values - vm.dirty_bytes and
-vm.dirty_background_bytes - are distributed across cgroups according
-to their current writeback bandwidth.
-
-There's a peculiarity stemming from the discrepancy in ownership
-granularity between memory controller and writeback.  While memory
-controller tracks ownership per page, writeback operates on inode
-basis.  cgroup writeback bridges the gap by tracking ownership by
-inode but migrating ownership if too many foreign pages, pages which
-don't match the current inode ownership, have been encountered while
-writing back the inode.
-
-This is a conscious design choice as writeback operations are
-inherently tied to inodes making strictly following page ownership
-complicated and inefficient.  The only use case which suffers from
-this compromise is multiple cgroups concurrently dirtying disjoint
-regions of the same inode, which is an unlikely use case and decided
-to be unsupported.  Note that as memory controller assigns page
-ownership on the first use and doesn't update it until the page is
-released, even if cgroup writeback strictly follows page ownership,
-multiple cgroups dirtying overlapping areas wouldn't work as expected.
-In general, write-sharing an inode across multiple cgroups is not well
-supported.
-
-Filesystem support for cgroup writeback
----------------------------------------
-
-A filesystem can make writeback IOs cgroup-aware by updating
-address_space_operations->writepage[s]() to annotate bio's using the
-following two functions.
-
-* wbc_init_bio(@wbc, @bio)
-
-  Should be called for each bio carrying writeback data and associates
-  the bio with the inode's owner cgroup.  Can be called anytime
-  between bio allocation and submission.
-
-* wbc_account_io(@wbc, @page, @bytes)
-
-  Should be called for each data segment being written out.  While
-  this function doesn't care exactly when it's called during the
-  writeback session, it's the easiest and most natural to call it as
-  data segments are added to a bio.
-
-With writeback bio's annotated, cgroup support can be enabled per
-super_block by setting MS_CGROUPWB in ->s_flags.  This allows for
-selective disabling of cgroup writeback support which is helpful when
-certain filesystem features, e.g. journaled data mode, are
-incompatible.
-
-wbc_init_bio() binds the specified bio to its cgroup.  Depending on
-the configuration, the bio may be executed at a lower priority and if
-the writeback session is holding shared resources, e.g. a journal
-entry, may lead to priority inversion.  There is no one easy solution
-for the problem.  Filesystems can try to work around specific problem
-cases by skipping wbc_init_bio() or using bio_associate_blkcg()
-directly.

Documentation/cpu-freq/pcc-cpufreq.txt

@@ -159,8 +159,8 @@ to be strictly associated with a P-state.
 
 2.2 cpuinfo_transition_latency:
 -------------------------------
-The cpuinfo_transition_latency field is 0. The PCC specification does
-not include a field to expose this value currently.
+The cpuinfo_transition_latency field is CPUFREQ_ETERNAL. The PCC specification
+does not include a field to expose this value currently.
 
 2.3 cpuinfo_cur_freq:
 ---------------------

Documentation/devicetree/bindings/arm/cpus.txt

@@ -242,6 +242,23 @@ nodes to be present and contain the properties described below.
 		Definition: Specifies the syscon node controlling the cpu core
 			    power domains.
 
+	- dynamic-power-coefficient
+		Usage: optional
+		Value type: <prop-encoded-array>
+		Definition: A u32 value that represents the running time dynamic
+			    power coefficient in units of mW/MHz/uVolt^2. The
+			    coefficient can either be calculated from power
+			    measurements or derived by analysis.
+
+			    The dynamic power consumption of the CPU  is
+			    proportional to the square of the Voltage (V) and
+			    the clock frequency (f). The coefficient is used to
+			    calculate the dynamic power as below -
+
+			    Pdyn = dynamic-power-coefficient * V^2 * f
+
+			    where voltage is in uV, frequency is in MHz.
+
 Example 1 (dual-cluster big.LITTLE system 32-bit):
 
 	cpus {

Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt

+Binding for ST's CPUFreq driver
+===============================
+
+ST's CPUFreq driver attempts to read 'process' and 'version' attributes
+from the SoC, then supplies the OPP framework with 'prop' and 'supported
+hardware' information respectively.  The framework is then able to read
+the DT and operate in the usual way.
+
+For more information about the expected DT format [See: ../opp/opp.txt].
+
+Frequency Scaling only
+----------------------
+
+No vendor specific driver required for this.
+
+Located in CPU's node:
+
+- operating-points		: [See: ../power/opp.txt]
+
+Example [safe]
+--------------
+
+cpus {
+	cpu@0 {
+				 /* kHz     uV   */
+		operating-points = <1500000 0
+				    1200000 0
+				    800000  0
+				    500000  0>;
+	};
+};
+
+Dynamic Voltage and Frequency Scaling (DVFS)
+--------------------------------------------
+
+This requires the ST CPUFreq driver to supply 'process' and 'version' info.
+
+Located in CPU's node:
+
+- operating-points-v2		: [See ../power/opp.txt]
+
+Example [unsafe]
+----------------
+
+cpus {
+	cpu@0 {
+		operating-points-v2	= <&cpu0_opp_table>;
+	};
+};
+
+cpu0_opp_table: opp_table {
+	compatible = "operating-points-v2";
+
+	/* ############################################################### */
+	/* # WARNING: Do not attempt to copy/replicate these nodes,      # */
+	/* #          they are only to be supplied by the bootloader !!! # */
+	/* ############################################################### */
+	opp0 {
+		/*			   Major       Minor       Substrate */
+		/*			   2           all         all       */
+		opp-supported-hw	= <0x00000004  0xffffffff  0xffffffff>;
+		opp-hz			= /bits/ 64 <1500000000>;
+		clock-latency-ns	= <10000000>;
+
+		opp-microvolt-pcode0	= <1200000>;
+		opp-microvolt-pcode1	= <1200000>;
+		opp-microvolt-pcode2	= <1200000>;
+		opp-microvolt-pcode3	= <1200000>;
+		opp-microvolt-pcode4	= <1170000>;
+		opp-microvolt-pcode5	= <1140000>;
+		opp-microvolt-pcode6	= <1100000>;
+		opp-microvolt-pcode7	= <1070000>;
+	};
+
+	opp1 {
+		/*			   Major       Minor       Substrate */
+		/*			   all         all         all       */
+		opp-supported-hw	= <0xffffffff  0xffffffff  0xffffffff>;
+		opp-hz			= /bits/ 64 <1200000000>;
+		clock-latency-ns	= <10000000>;
+
+		opp-microvolt-pcode0	= <1110000>;
+		opp-microvolt-pcode1	= <1150000>;
+		opp-microvolt-pcode2	= <1100000>;
+		opp-microvolt-pcode3	= <1080000>;
+		opp-microvolt-pcode4	= <1040000>;
+		opp-microvolt-pcode5	= <1020000>;
+		opp-microvolt-pcode6	= <980000>;
+		opp-microvolt-pcode7	= <930000>;
+	};
+};

Documentation/devicetree/bindings/opp/opp.txt

@@ -45,21 +45,10 @@ Devices supporting OPPs must set their "operating-points-v2" property with
 phandle to a OPP table in their DT node. The OPP core will use this phandle to
 find the operating points for the device.
 
-Devices may want to choose OPP tables at runtime and so can provide a list of
-phandles here. But only *one* of them should be chosen at runtime. This must be
-accompanied by a corresponding "operating-points-names" property, to uniquely
-identify the OPP tables.
-
 If required, this can be extended for SoC vendor specfic bindings. Such bindings
 should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
 and should have a compatible description like: "operating-points-v2-<vendor>".
 
-Optional properties:
-- operating-points-names: Names of OPP tables (required if multiple OPP
-  tables are present), to uniquely identify them. The same list must be present
-  for all the CPUs which are sharing clock/voltage rails and hence the OPP
-  tables.
-
 * OPP Table Node
 
 This describes the OPPs belonging to a device. This node can have following
@@ -100,6 +89,14 @@ Optional properties:
   Entries for multiple regulators must be present in the same order as
   regulators are specified in device's DT node.
 
+- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
+  the above opp-microvolt property, but allows multiple voltage ranges to be
+  provided for the same OPP. At runtime, the platform can pick a <name> and
+  matching opp-microvolt-<name> property will be enabled for all OPPs. If the
+  platform doesn't pick a specific <name> or the <name> doesn't match with any
+  opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
+  present.
+
 - opp-microamp: The maximum current drawn by the device in microamperes
   considering system specific parameters (such as transients, process, aging,
   maximum operating temperature range etc.) as necessary. This may be used to
@@ -112,6 +109,9 @@ Optional properties:
   for few regulators, then this should be marked as zero for them. If it isn't
   required for any regulator, then this property need not be present.
 
+- opp-microamp-<name>: Named opp-microamp property. Similar to
+  opp-microvolt-<name> property, but for microamp instead.
+
 - clock-latency-ns: Specifies the maximum possible transition latency (in
   nanoseconds) for switching to this OPP from any other OPP.
 
@@ -123,6 +123,26 @@ Optional properties:
 - opp-suspend: Marks the OPP to be used during device suspend. Only one OPP in
   the table should have this.
 
+- opp-supported-hw: This enables us to select only a subset of OPPs from the
+  larger OPP table, based on what version of the hardware we are running on. We
+  still can't have multiple nodes with the same opp-hz value in OPP table.
+
+  It's an user defined array containing a hierarchy of hardware version numbers,
+  supported by the OPP. For example: a platform with hierarchy of three levels
+  of versions (A, B and C), this field should be like <X Y Z>, where X
+  corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z
+  corresponds to version hierarchy C.
+
+  Each level of hierarchy is represented by a 32 bit value, and so there can be
+  only 32 different supported version per hierarchy. i.e. 1 bit per version. A
+  value of 0xFFFFFFFF will enable the OPP for all versions for that hierarchy
+  level. And a value of 0x00000000 will disable the OPP completely, and so we
+  never want that to happen.
+
+  If 32 values aren't sufficient for a version hierarchy, than that version
+  hierarchy can be contained in multiple 32 bit values. i.e. <X Y Z1 Z2> in the
+  above example, Z1 & Z2 refer to the version hierarchy Z.
+
 - status: Marks the node enabled/disabled.
 
 Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
@@ -157,20 +177,20 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp01 {
+		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <980000 1000000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp02 {
+		opp@1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			clock-latency-ns = <290000>;
@@ -236,20 +256,20 @@ independently.
 		 * independently.
 		 */
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp01 {
+		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <980000 1000000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp02 {
+		opp@1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			opp-microamp = <90000;
@@ -312,20 +332,20 @@ DVFS state together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>;
 			opp-microamp = <70000>;
 			clock-latency-ns = <300000>;
 			opp-suspend;
 		};
-		opp01 {
+		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <980000 1000000 1010000>;
 			opp-microamp = <80000>;
 			clock-latency-ns = <310000>;
 		};
-		opp02 {
+		opp@1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1025000>;
 			opp-microamp = <90000>;
@@ -338,20 +358,20 @@ DVFS state together.
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp10 {
+		opp@1300000000 {
 			opp-hz = /bits/ 64 <1300000000>;
 			opp-microvolt = <1045000 1050000 1055000>;
 			opp-microamp = <95000>;
 			clock-latency-ns = <400000>;
 			opp-suspend;
 		};
-		opp11 {
+		opp@1400000000 {
 			opp-hz = /bits/ 64 <1400000000>;
 			opp-microvolt = <1075000>;
 			opp-microamp = <100000>;
 			clock-latency-ns = <400000>;
 		};
-		opp12 {
+		opp@1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <1010000 1100000 1110000>;
 			opp-microamp = <95000>;
@@ -378,7 +398,7 @@ Example 4: Handling multiple regulators
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000>, /* Supply 0 */
 					<960000>, /* Supply 1 */
@@ -391,7 +411,7 @@ Example 4: Handling multiple regulators
 
 		/* OR */
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>, /* Supply 0 */
 					<960000 965000 975000>, /* Supply 1 */
@@ -404,7 +424,7 @@ Example 4: Handling multiple regulators
 
 		/* OR */
 
-		opp00 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <970000 975000 985000>, /* Supply 0 */
 					<960000 965000 975000>, /* Supply 1 */
@@ -417,7 +437,8 @@ Example 4: Handling multiple regulators
 	};
 };
 
-Example 5: Multiple OPP tables
+Example 5: opp-supported-hw
+(example: three level hierarchy of versions: cuts, substrate and process)
 
 / {
 	cpus {
@@ -426,40 +447,73 @@ Example 5: Multiple OPP tables
 			...
 
 			cpu-supply = <&cpu_supply>
-			operating-points-v2 = <&cpu0_opp_table_slow>, <&cpu0_opp_table_fast>;
-			operating-points-names = "slow", "fast";
+			operating-points-v2 = <&cpu0_opp_table_slow>;
 		};
 	};
 
-	cpu0_opp_table_slow: opp_table_slow {
+	opp_table {
 		compatible = "operating-points-v2";
 		status = "okay";
 		opp-shared;
 
-		opp00 {
+		opp@600000000 {
+			/*
+			 * Supports all substrate and process versions for 0xF
+			 * cuts, i.e. only first four cuts.
+			 */
+			opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
 			opp-hz = /bits/ 64 <600000000>;
+			opp-microvolt = <900000 915000 925000>;
 			...
 		};
 
-		opp01 {
+		opp@800000000 {
+			/*
+			 * Supports:
+			 * - cuts: only one, 6th cut (represented by 6th bit).
+			 * - substrate: supports 16 different substrate versions
+			 * - process: supports 9 different process versions
+			 */
+			opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
 			opp-hz = /bits/ 64 <800000000>;
+			opp-microvolt = <900000 915000 925000>;
 			...
 		};
 	};
+};
+
+Example 6: opp-microvolt-<name>, opp-microamp-<name>:
+(example: device with two possible microvolt ranges: slow and fast)
 
-	cpu0_opp_table_fast: opp_table_fast {
+/ {
+	cpus {
+		cpu@0 {
+			compatible = "arm,cortex-a7";
+			...
+
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
+	cpu0_opp_table: opp_table0 {
 		compatible = "operating-points-v2";
-		status = "okay";
 		opp-shared;
 
-		opp10 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			...
+			opp-microvolt-slow = <900000 915000 925000>;
+			opp-microvolt-fast = <970000 975000 985000>;
+			opp-microamp-slow =  <70000>;
+			opp-microamp-fast =  <71000>;
 		};
 
-		opp11 {
-			opp-hz = /bits/ 64 <1100000000>;
-			...
+		opp@1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */
+					      <910000 925000 935000>; /* Supply vcc1 */
+			opp-microvolt-fast = <970000 975000 985000>, /* Supply vcc0 */
+					     <960000 965000 975000>; /* Supply vcc1 */
+			opp-microamp =  <70000>; /* Will be used for both slow/fast */
 		};
 	};
 };

Documentation/networking/mac80211-injection.txt

@@ -28,6 +28,23 @@ radiotap headers and used to control injection:
    IEEE80211_RADIOTAP_F_TX_NOACK: frame should be sent without waiting for
 				  an ACK even if it is a unicast frame
 
+ * IEEE80211_RADIOTAP_RATE
+
+   legacy rate for the transmission (only for devices without own rate control)
+
+ * IEEE80211_RADIOTAP_MCS
+
+   HT rate for the transmission (only for devices without own rate control).
+   Also some flags are parsed
+
+   IEEE80211_TX_RC_SHORT_GI: use short guard interval
+   IEEE80211_TX_RC_40_MHZ_WIDTH: send in HT40 mode
+
+ * IEEE80211_RADIOTAP_DATA_RETRIES
+
+   number of retries when either IEEE80211_RADIOTAP_RATE or
+   IEEE80211_RADIOTAP_MCS was used
+
 The injection code can also skip all other currently defined radiotap fields
 facilitating replay of captured radiotap headers directly.
 

Documentation/power/pci.txt

@@ -999,7 +999,7 @@ from its probe routine to make runtime PM work for the device.
 
 It is important to remember that the driver's runtime_suspend() callback
 may be executed right after the usage counter has been decremented, because
-user space may already have cuased the pm_runtime_allow() helper function
+user space may already have caused the pm_runtime_allow() helper function
 unblocking the runtime PM of the device to run via sysfs, so the driver must
 be prepared to cope with that.
 

Documentation/power/runtime_pm.txt

@@ -371,6 +371,12 @@ drivers/base/power/runtime.c and include/linux/pm_runtime.h:
     - increment the device's usage counter, run pm_runtime_resume(dev) and
       return its result
 
+  int pm_runtime_get_if_in_use(struct device *dev);
+    - return -EINVAL if 'power.disable_depth' is nonzero; otherwise, if the
+      runtime PM status is RPM_ACTIVE and the runtime PM usage counter is
+      nonzero, increment the counter and return 1; otherwise return 0 without
+      changing the counter
+
   void pm_runtime_put_noidle(struct device *dev);
     - decrement the device's usage counter
 

Documentation/rfkill.txt

@@ -83,6 +83,8 @@ rfkill drivers that control devices that can be hard-blocked unless they also
 assign the poll_hw_block() callback (then the rfkill core will poll the
 device). Don't do this unless you cannot get the event in any other way.
 
+RFKill provides per-switch LED triggers, which can be used to drive LEDs
+according to the switch state (LED_FULL when blocked, LED_OFF otherwise).
 
 
 5. Userspace support

MAINTAINERS

@@ -8466,6 +8466,17 @@ F:	fs/timerfd.c
 F:	include/linux/timer*
 F:	kernel/time/*timer*
 
+POWER MANAGEMENT CORE
+M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+L:	linux-pm@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
+S:	Supported
+F:	drivers/base/power/
+F:	include/linux/pm.h
+F:	include/linux/pm_*
+F:	include/linux/powercap.h
+F:	drivers/powercap/
+
 POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
 M:	Sebastian Reichel <sre@kernel.org>
 M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>

arch/arm/boot/dts/exynos4412.dtsi

@@ -64,73 +64,73 @@ cpu0_opp_table: opp_table0 {
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp00 {
+		opp@200000000 {
 			opp-hz = /bits/ 64 <200000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <200000>;
 		};
-		opp01 {
+		opp@300000000 {
 			opp-hz = /bits/ 64 <300000000>;
 			opp-microvolt = <900000>;
 			clock-latency-ns = <200000>;
 		};
-		opp02 {
+		opp@400000000 {
 			opp-hz = /bits/ 64 <400000000>;
 			opp-microvolt = <925000>;
 			clock-latency-ns = <200000>;
 		};
-		opp03 {
+		opp@500000000 {
 			opp-hz = /bits/ 64 <500000000>;
 			opp-microvolt = <950000>;
 			clock-latency-ns = <200000>;
 		};
-		opp04 {
+		opp@600000000 {
 			opp-hz = /bits/ 64 <600000000>;
 			opp-microvolt = <975000>;
 			clock-latency-ns = <200000>;
 		};
-		opp05 {
+		opp@700000000 {
 			opp-hz = /bits/ 64 <700000000>;
 			opp-microvolt = <987500>;
 			clock-latency-ns = <200000>;
 		};
-		opp06 {
+		opp@800000000 {
 			opp-hz = /bits/ 64 <800000000>;
 			opp-microvolt = <1000000>;
 			clock-latency-ns = <200000>;
 			opp-suspend;
 		};
-		opp07 {
+		opp@900000000 {
 			opp-hz = /bits/ 64 <900000000>;
 			opp-microvolt = <1037500>;
 			clock-latency-ns = <200000>;
 		};
-		opp08 {
+		opp@1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
 			opp-microvolt = <1087500>;
 			clock-latency-ns = <200000>;
 		};
-		opp09 {
+		opp@1100000000 {
 			opp-hz = /bits/ 64 <1100000000>;
 			opp-microvolt = <1137500>;
 			clock-latency-ns = <200000>;
 		};
-		opp10 {
+		opp@1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <1187500>;
 			clock-latency-ns = <200000>;
 		};
-		opp11 {
+		opp@1300000000 {
 			opp-hz = /bits/ 64 <1300000000>;
 			opp-microvolt = <1250000>;
 			clock-latency-ns = <200000>;
 		};
-		opp12 {
+		opp@1400000000 {
 			opp-hz = /bits/ 64 <1400000000>;
 			opp-microvolt = <1287500>;
 			clock-latency-ns = <200000>;
 		};
-		opp13 {
+		opp@1500000000 {
 			opp-hz = /bits/ 64 <1500000000>;
 			opp-microvolt = <1350000>;
 			clock-latency-ns = <200000>;

arch/arm/mach-tegra/board-paz00.c

@@ -17,23 +17,25 @@
  *
  */
 
+#include <linux/property.h>
 #include <linux/gpio/machine.h>
 #include <linux/platform_device.h>
-#include <linux/rfkill-gpio.h>
 
 #include "board.h"
 
-static struct rfkill_gpio_platform_data wifi_rfkill_platform_data = {
-	.name	= "wifi_rfkill",
-	.type	= RFKILL_TYPE_WLAN,
+static struct property_entry __initdata wifi_rfkill_prop[] = {
+	PROPERTY_ENTRY_STRING("name", "wifi_rfkill"),
+	PROPERTY_ENTRY_STRING("type", "wlan"),
+	{ },
+};
+
+static struct property_set __initdata wifi_rfkill_pset = {
+	.properties = wifi_rfkill_prop,
 };
 
 static struct platform_device wifi_rfkill_device = {
 	.name	= "rfkill_gpio",
 	.id	= -1,
-	.dev	= {
-		.platform_data = &wifi_rfkill_platform_data,
-	},
 };
 
 static struct gpiod_lookup_table wifi_gpio_lookup = {
@@ -47,6 +49,7 @@ static struct gpiod_lookup_table wifi_gpio_lookup = {
 
 void __init tegra_paz00_wifikill_init(void)
 {
+	platform_device_add_properties(&wifi_rfkill_device, &wifi_rfkill_pset);
 	gpiod_add_lookup_table(&wifi_gpio_lookup);
 	platform_device_register(&wifi_rfkill_device);
 }

arch/ia64/kernel/ftrace.c

@@ -97,13 +97,11 @@ ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 	unsigned char replaced[MCOUNT_INSN_SIZE];
 
 	/*
-	 * Note: Due to modules and __init, code can
-	 *  disappear and change, we need to protect against faulting
-	 *  as well as code changing. We do this by using the
-	 *  probe_kernel_* functions.
-	 *
-	 * No real locking needed, this code is run through
-	 * kstop_machine, or before SMP starts.
+	 * Note:
+	 * We are paranoid about modifying text, as if a bug was to happen, it
+	 * could cause us to read or write to someplace that could cause harm.
+	 * Carefully read and modify the code with probe_kernel_*(), and make
+	 * sure what we read is what we expected it to be before modifying it.
 	 */
 
 	if (!do_check)

arch/metag/kernel/ftrace.c

@@ -54,12 +54,11 @@ static int ftrace_modify_code(unsigned long pc, unsigned char *old_code,
 	unsigned char replaced[MCOUNT_INSN_SIZE];
 
 	/*
-	 * Note: Due to modules and __init, code can
-	 *  disappear and change, we need to protect against faulting
-	 *  as well as code changing.
-	 *
-	 * No real locking needed, this code is run through
-	 * kstop_machine.
+	 * Note:
+	 * We are paranoid about modifying text, as if a bug was to happen, it
+	 * could cause us to read or write to someplace that could cause harm.
+	 * Carefully read and modify the code with probe_kernel_*(), and make
+	 * sure what we read is what we expected it to be before modifying it.
 	 */
 
 	/* read the text we want to modify */

arch/sh/kernel/ftrace.c

@@ -212,13 +212,11 @@ static int ftrace_modify_code(unsigned long ip, unsigned char *old_code,
 	unsigned char replaced[MCOUNT_INSN_SIZE];
 
 	/*
-	 * Note: Due to modules and __init, code can
-	 *  disappear and change, we need to protect against faulting
-	 *  as well as code changing. We do this by using the
-	 *  probe_kernel_* functions.
-	 *
-	 * No real locking needed, this code is run through
-	 * kstop_machine, or before SMP starts.
+	 * Note:
+	 * We are paranoid about modifying text, as if a bug was to happen, it
+	 * could cause us to read or write to someplace that could cause harm.
+	 * Carefully read and modify the code with probe_kernel_*(), and make
+	 * sure what we read is what we expected it to be before modifying it.
 	 */
 
 	/* read the text we want to modify */

arch/x86/Kconfig

@@ -534,9 +534,10 @@ config X86_INTEL_QUARK
 
 config X86_INTEL_LPSS
 	bool "Intel Low Power Subsystem Support"
-	depends on ACPI
+	depends on X86 && ACPI
 	select COMMON_CLK
 	select PINCTRL
+	select IOSF_MBI
 	---help---
 	  Select to build support for Intel Low Power Subsystem such as
 	  found on Intel Lynxpoint PCH. Selecting this option enables

arch/x86/include/asm/iosf_mbi.h

 /*
- * iosf_mbi.h: Intel OnChip System Fabric MailBox access support
+ * Intel OnChip System Fabric MailBox access support
  */
 
 #ifndef IOSF_MBI_SYMS_H
@@ -16,6 +16,18 @@
 #define MBI_MASK_LO		0x000000FF
 #define MBI_ENABLE		0xF0
 
+/* IOSF SB read/write opcodes */
+#define MBI_MMIO_READ		0x00
+#define MBI_MMIO_WRITE		0x01
+#define MBI_CFG_READ		0x04
+#define MBI_CFG_WRITE		0x05
+#define MBI_CR_READ		0x06
+#define MBI_CR_WRITE		0x07
+#define MBI_REG_READ		0x10
+#define MBI_REG_WRITE		0x11
+#define MBI_ESRAM_READ		0x12
+#define MBI_ESRAM_WRITE		0x13
+
 /* Baytrail available units */
 #define BT_MBI_UNIT_AUNIT	0x00
 #define BT_MBI_UNIT_SMC		0x01
@@ -28,50 +40,13 @@
 #define BT_MBI_UNIT_SATA	0xA3
 #define BT_MBI_UNIT_PCIE	0xA6
 
-/* Baytrail read/write opcodes */
-#define BT_MBI_AUNIT_READ	0x10
-#define BT_MBI_AUNIT_WRITE	0x11
-#define BT_MBI_SMC_READ		0x10
-#define BT_MBI_SMC_WRITE	0x11
-#define BT_MBI_CPU_READ		0x10
-#define BT_MBI_CPU_WRITE	0x11
-#define BT_MBI_BUNIT_READ	0x10
-#define BT_MBI_BUNIT_WRITE	0x11
-#define BT_MBI_PMC_READ		0x06
-#define BT_MBI_PMC_WRITE	0x07
-#define BT_MBI_GFX_READ		0x00
-#define BT_MBI_GFX_WRITE	0x01
-#define BT_MBI_SMIO_READ	0x06
-#define BT_MBI_SMIO_WRITE	0x07
-#define BT_MBI_USB_READ		0x06
-#define BT_MBI_USB_WRITE	0x07
-#define BT_MBI_SATA_READ	0x00
-#define BT_MBI_SATA_WRITE	0x01
-#define BT_MBI_PCIE_READ	0x00
-#define BT_MBI_PCIE_WRITE	0x01
-
 /* Quark available units */
 #define QRK_MBI_UNIT_HBA	0x00
 #define QRK_MBI_UNIT_HB		0x03
 #define QRK_MBI_UNIT_RMU	0x04
 #define QRK_MBI_UNIT_MM		0x05
-#define QRK_MBI_UNIT_MMESRAM	0x05
 #define QRK_MBI_UNIT_SOC	0x31
 
-/* Quark read/write opcodes */
-#define QRK_MBI_HBA_READ	0x10
-#define QRK_MBI_HBA_WRITE	0x11
-#define QRK_MBI_HB_READ		0x10
-#define QRK_MBI_HB_WRITE	0x11
-#define QRK_MBI_RMU_READ	0x10
-#define QRK_MBI_RMU_WRITE	0x11
-#define QRK_MBI_MM_READ		0x10
-#define QRK_MBI_MM_WRITE	0x11
-#define QRK_MBI_MMESRAM_READ	0x12
-#define QRK_MBI_MMESRAM_WRITE	0x13
-#define QRK_MBI_SOC_READ	0x06
-#define QRK_MBI_SOC_WRITE	0x07
-
 #if IS_ENABLED(CONFIG_IOSF_MBI)
 
 bool iosf_mbi_available(void);

arch/x86/kernel/ftrace.c

@@ -105,14 +105,14 @@ ftrace_modify_code_direct(unsigned long ip, unsigned const char *old_code,
 {
 	unsigned char replaced[MCOUNT_INSN_SIZE];
 
+	ftrace_expected = old_code;
+
 	/*
-	 * Note: Due to modules and __init, code can
-	 *  disappear and change, we need to protect against faulting
-	 *  as well as code changing. We do this by using the
-	 *  probe_kernel_* functions.
-	 *
-	 * No real locking needed, this code is run through
-	 * kstop_machine, or before SMP starts.
+	 * Note:
+	 * We are paranoid about modifying text, as if a bug was to happen, it
+	 * could cause us to read or write to someplace that could cause harm.
+	 * Carefully read and modify the code with probe_kernel_*(), and make
+	 * sure what we read is what we expected it to be before modifying it.
 	 */
 
 	/* read the text we want to modify */
@@ -154,6 +154,8 @@ int ftrace_make_nop(struct module *mod,
 	if (addr == MCOUNT_ADDR)
 		return ftrace_modify_code_direct(rec->ip, old, new);
 
+	ftrace_expected = NULL;
+
 	/* Normal cases use add_brk_on_nop */
 	WARN_ONCE(1, "invalid use of ftrace_make_nop");
 	return -EINVAL;
@@ -220,6 +222,7 @@ int ftrace_modify_call(struct dyn_ftrace *rec, unsigned long old_addr,
 				 unsigned long addr)
 {
 	WARN_ON(1);
+	ftrace_expected = NULL;
 	return -EINVAL;
 }
 
@@ -314,6 +317,8 @@ static int add_break(unsigned long ip, const char *old)
 	if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
 		return -EFAULT;
 
+	ftrace_expected = old;
+
 	/* Make sure it is what we expect it to be */
 	if (memcmp(replaced, old, MCOUNT_INSN_SIZE) != 0)
 		return -EINVAL;
@@ -413,6 +418,8 @@ static int remove_breakpoint(struct dyn_ftrace *rec)
 		ftrace_addr = ftrace_get_addr_curr(rec);
 		nop = ftrace_call_replace(ip, ftrace_addr);
 
+		ftrace_expected = nop;
+
 		if (memcmp(&ins[1], &nop[1], MCOUNT_INSN_SIZE - 1) != 0)
 			return -EINVAL;
 	}

arch/x86/platform/atom/punit_atom_debug.c

@@ -25,8 +25,6 @@
 #include <asm/cpu_device_id.h>
 #include <asm/iosf_mbi.h>
 
-/* Side band Interface port */
-#define PUNIT_PORT		0x04
 /* Power gate status reg */
 #define PWRGT_STATUS		0x61
 /* Subsystem config/status Video processor */
@@ -85,9 +83,8 @@ static int punit_dev_state_show(struct seq_file *seq_file, void *unused)
 
 	seq_puts(seq_file, "\n\nPUNIT NORTH COMPLEX DEVICES :\n");
 	while (punit_devp->name) {
-		status = iosf_mbi_read(PUNIT_PORT, BT_MBI_PMC_READ,
-				       punit_devp->reg,
-				       &punit_pwr_status);
+		status = iosf_mbi_read(BT_MBI_UNIT_PMC, MBI_REG_READ,
+				       punit_devp->reg, &punit_pwr_status);
 		if (status) {
 			seq_printf(seq_file, "%9s : Read Failed\n",
 				   punit_devp->name);

arch/x86/platform/intel-quark/imr.c

@@ -111,23 +111,19 @@ static int imr_read(struct imr_device *idev, u32 imr_id, struct imr_regs *imr)
 	u32 reg = imr_id * IMR_NUM_REGS + idev->reg_base;
 	int ret;
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->addr_lo);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->addr_lo);
 	if (ret)
 		return ret;
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->addr_hi);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->addr_hi);
 	if (ret)
 		return ret;
 
-	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->rmask);
+	ret = iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->rmask);
 	if (ret)
 		return ret;
 
-	return iosf_mbi_read(QRK_MBI_UNIT_MM, QRK_MBI_MM_READ,
-				reg++, &imr->wmask);
+	return iosf_mbi_read(QRK_MBI_UNIT_MM, MBI_REG_READ, reg++, &imr->wmask);
 }
 
 /**
@@ -151,31 +147,27 @@ static int imr_write(struct imr_device *idev, u32 imr_id,
 
 	local_irq_save(flags);
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE, reg++,
-				imr->addr_lo);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->addr_lo);
 	if (ret)
 		goto failed;
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-				reg++, imr->addr_hi);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->addr_hi);
 	if (ret)
 		goto failed;
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-				reg++, imr->rmask);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->rmask);
 	if (ret)
 		goto failed;
 
-	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-				reg++, imr->wmask);
+	ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE, reg++, imr->wmask);
 	if (ret)
 		goto failed;
 
 	/* Lock bit must be set separately to addr_lo address bits. */
 	if (lock) {
 		imr->addr_lo |= IMR_LOCK;
-		ret = iosf_mbi_write(QRK_MBI_UNIT_MM, QRK_MBI_MM_WRITE,
-					reg - IMR_NUM_REGS, imr->addr_lo);
+		ret = iosf_mbi_write(QRK_MBI_UNIT_MM, MBI_REG_WRITE,
+				     reg - IMR_NUM_REGS, imr->addr_lo);
 		if (ret)
 			goto failed;
 	}

drivers/acpi/Kconfig

@@ -58,14 +58,25 @@ config ACPI_CCA_REQUIRED
 	bool
 
 config ACPI_DEBUGGER
-	bool "AML debugger interface (EXPERIMENTAL)"
+	bool "AML debugger interface"
 	select ACPI_DEBUG
 	help
-	  Enable in-kernel debugging of AML facilities: statistics, internal
-	  object dump, single step control method execution.
+	  Enable in-kernel debugging of AML facilities: statistics,
+	  internal object dump, single step control method execution.
 	  This is still under development, currently enabling this only
 	  results in the compilation of the ACPICA debugger files.
 
+if ACPI_DEBUGGER
+
+config ACPI_DEBUGGER_USER
+	tristate "Userspace debugger accessiblity"
+	depends on DEBUG_FS
+	help
+	  Export /sys/kernel/debug/acpi/acpidbg for userspace utilities
+	  to access the debugger functionalities.
+
+endif
+
 config ACPI_SLEEP
 	bool
 	depends on SUSPEND || HIBERNATION

drivers/acpi/Makefile

@@ -8,13 +8,13 @@ ccflags-$(CONFIG_ACPI_DEBUG)	+= -DACPI_DEBUG_OUTPUT
 #
 # ACPI Boot-Time Table Parsing
 #
-obj-y				+= tables.o
+obj-$(CONFIG_ACPI)		+= tables.o
 obj-$(CONFIG_X86)		+= blacklist.o
 
 #
 # ACPI Core Subsystem (Interpreter)
 #
-obj-y				+= acpi.o \
+obj-$(CONFIG_ACPI)		+= acpi.o \
 					acpica/
 
 # All the builtin files are in the "acpi." module_param namespace.
@@ -66,10 +66,10 @@ obj-$(CONFIG_ACPI_FAN)		+= fan.o
 obj-$(CONFIG_ACPI_VIDEO)	+= video.o
 obj-$(CONFIG_ACPI_PCI_SLOT)	+= pci_slot.o
 obj-$(CONFIG_ACPI_PROCESSOR)	+= processor.o
-obj-y				+= container.o
+obj-$(CONFIG_ACPI)		+= container.o
 obj-$(CONFIG_ACPI_THERMAL)	+= thermal.o
 obj-$(CONFIG_ACPI_NFIT)		+= nfit.o
-obj-y				+= acpi_memhotplug.o
+obj-$(CONFIG_ACPI)		+= acpi_memhotplug.o
 obj-$(CONFIG_ACPI_HOTPLUG_IOAPIC) += ioapic.o
 obj-$(CONFIG_ACPI_BATTERY)	+= battery.o
 obj-$(CONFIG_ACPI_SBS)		+= sbshc.o
@@ -79,6 +79,7 @@ obj-$(CONFIG_ACPI_EC_DEBUGFS)	+= ec_sys.o
 obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
 obj-$(CONFIG_ACPI_BGRT)		+= bgrt.o
 obj-$(CONFIG_ACPI_CPPC_LIB)	+= cppc_acpi.o
+obj-$(CONFIG_ACPI_DEBUGGER_USER) += acpi_dbg.o
 
 # processor has its own "processor." module_param namespace
 processor-y			:= processor_driver.o

drivers/acpi/acpi_apd.c

@@ -51,7 +51,7 @@ struct apd_private_data {
 	const struct apd_device_desc *dev_desc;
 };
 
-#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
+#if defined(CONFIG_X86_AMD_PLATFORM_DEVICE) || defined(CONFIG_ARM64)
 #define APD_ADDR(desc)	((unsigned long)&desc)
 
 static int acpi_apd_setup(struct apd_private_data *pdata)
@@ -71,6 +71,7 @@ static int acpi_apd_setup(struct apd_private_data *pdata)
 	return 0;
 }
 
+#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
 static struct apd_device_desc cz_i2c_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 133000000,
@@ -80,6 +81,14 @@ static struct apd_device_desc cz_uart_desc = {
 	.setup = acpi_apd_setup,
 	.fixed_clk_rate = 48000000,
 };
+#endif
+
+#ifdef CONFIG_ARM64
+static struct apd_device_desc xgene_i2c_desc = {
+	.setup = acpi_apd_setup,
+	.fixed_clk_rate = 100000000,
+};
+#endif
 
 #else
 
@@ -132,9 +141,14 @@ static int acpi_apd_create_device(struct acpi_device *adev,
 
 static const struct acpi_device_id acpi_apd_device_ids[] = {
 	/* Generic apd devices */
+#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
 	{ "AMD0010", APD_ADDR(cz_i2c_desc) },
 	{ "AMD0020", APD_ADDR(cz_uart_desc) },
 	{ "AMD0030", },
+#endif
+#ifdef CONFIG_ARM64
+	{ "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
+#endif
 	{ }
 };
 

drivers/acpi/acpi_lpss.c

@@ -15,6 +15,7 @@
 #include <linux/clk-provider.h>
 #include <linux/err.h>
 #include <linux/io.h>
+#include <linux/mutex.h>
 #include <linux/platform_device.h>
 #include <linux/platform_data/clk-lpss.h>
 #include <linux/pm_runtime.h>
@@ -26,6 +27,10 @@ ACPI_MODULE_NAME("acpi_lpss");
 
 #ifdef CONFIG_X86_INTEL_LPSS
 
+#include <asm/cpu_device_id.h>
+#include <asm/iosf_mbi.h>
+#include <asm/pmc_atom.h>
+
 #define LPSS_ADDR(desc) ((unsigned long)&desc)
 
 #define LPSS_CLK_SIZE	0x04
@@ -71,7 +76,7 @@ struct lpss_device_desc {
 	void (*setup)(struct lpss_private_data *pdata);
 };
 
-static struct lpss_device_desc lpss_dma_desc = {
+static const struct lpss_device_desc lpss_dma_desc = {
 	.flags = LPSS_CLK,
 };
 
@@ -84,6 +89,23 @@ struct lpss_private_data {
 	u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
 };
 
+/* LPSS run time quirks */
+static unsigned int lpss_quirks;
+
+/*
+ * LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
+ *
+ * The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
+ * it can be powered off automatically whenever the last LPSS device goes down.
+ * In case of no power any access to the DMA controller will hang the system.
+ * The behaviour is reproduced on some HP laptops based on Intel BayTrail as
+ * well as on ASuS T100TA transformer.
+ *
+ * This quirk overrides power state of entire LPSS island to keep DMA powered
+ * on whenever we have at least one other device in use.
+ */
+#define LPSS_QUIRK_ALWAYS_POWER_ON	BIT(0)
+
 /* UART Component Parameter Register */
 #define LPSS_UART_CPR			0xF4
 #define LPSS_UART_CPR_AFCE		BIT(4)
@@ -196,13 +218,21 @@ static const struct lpss_device_desc bsw_i2c_dev_desc = {
 	.setup = byt_i2c_setup,
 };
 
-static struct lpss_device_desc bsw_spi_dev_desc = {
+static const struct lpss_device_desc bsw_spi_dev_desc = {
 	.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
 			| LPSS_NO_D3_DELAY,
 	.prv_offset = 0x400,
 	.setup = lpss_deassert_reset,
 };
 
+#define ICPU(model)	{ X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
+
+static const struct x86_cpu_id lpss_cpu_ids[] = {
+	ICPU(0x37),	/* Valleyview, Bay Trail */
+	ICPU(0x4c),	/* Braswell, Cherry Trail */
+	{}
+};
+
 #else
 
 #define LPSS_ADDR(desc) (0UL)
@@ -574,6 +604,17 @@ static void acpi_lpss_restore_ctx(struct device *dev,
 {
 	unsigned int i;
 
+	for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
+		unsigned long offset = i * sizeof(u32);
+
+		__lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
+		dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
+			pdata->prv_reg_ctx[i], offset);
+	}
+}
+
+static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
+{
 	/*
 	 * The following delay is needed or the subsequent write operations may
 	 * fail. The LPSS devices are actually PCI devices and the PCI spec
@@ -586,14 +627,34 @@ static void acpi_lpss_restore_ctx(struct device *dev,
 		delay = 0;
 
 	msleep(delay);
+}
 
-	for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
-		unsigned long offset = i * sizeof(u32);
+static int acpi_lpss_activate(struct device *dev)
+{
+	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
+	int ret;
 
-		__lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
-		dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
-			pdata->prv_reg_ctx[i], offset);
-	}
+	ret = acpi_dev_runtime_resume(dev);
+	if (ret)
+		return ret;
+
+	acpi_lpss_d3_to_d0_delay(pdata);
+
+	/*
+	 * This is called only on ->probe() stage where a device is either in
+	 * known state defined by BIOS or most likely powered off. Due to this
+	 * we have to deassert reset line to be sure that ->probe() will
+	 * recognize the device.
+	 */
+	if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
+		lpss_deassert_reset(pdata);
+
+	return 0;
+}
+
+static void acpi_lpss_dismiss(struct device *dev)
+{
+	acpi_dev_runtime_suspend(dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
@@ -621,6 +682,8 @@ static int acpi_lpss_resume_early(struct device *dev)
 	if (ret)
 		return ret;
 
+	acpi_lpss_d3_to_d0_delay(pdata);
+
 	if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 		acpi_lpss_restore_ctx(dev, pdata);
 
@@ -628,6 +691,89 @@ static int acpi_lpss_resume_early(struct device *dev)
 }
 #endif /* CONFIG_PM_SLEEP */
 
+/* IOSF SB for LPSS island */
+#define LPSS_IOSF_UNIT_LPIOEP		0xA0
+#define LPSS_IOSF_UNIT_LPIO1		0xAB
+#define LPSS_IOSF_UNIT_LPIO2		0xAC
+
+#define LPSS_IOSF_PMCSR			0x84
+#define LPSS_PMCSR_D0			0
+#define LPSS_PMCSR_D3hot		3
+#define LPSS_PMCSR_Dx_MASK		GENMASK(1, 0)
+
+#define LPSS_IOSF_GPIODEF0		0x154
+#define LPSS_GPIODEF0_DMA1_D3		BIT(2)
+#define LPSS_GPIODEF0_DMA2_D3		BIT(3)
+#define LPSS_GPIODEF0_DMA_D3_MASK	GENMASK(3, 2)
+
+static DEFINE_MUTEX(lpss_iosf_mutex);
+
+static void lpss_iosf_enter_d3_state(void)
+{
+	u32 value1 = 0;
+	u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK;
+	u32 value2 = LPSS_PMCSR_D3hot;
+	u32 mask2 = LPSS_PMCSR_Dx_MASK;
+	/*
+	 * PMC provides an information about actual status of the LPSS devices.
+	 * Here we read the values related to LPSS power island, i.e. LPSS
+	 * devices, excluding both LPSS DMA controllers, along with SCC domain.
+	 */
+	u32 func_dis, d3_sts_0, pmc_status, pmc_mask = 0xfe000ffe;
+	int ret;
+
+	ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
+	if (ret)
+		return;
+
+	mutex_lock(&lpss_iosf_mutex);
+
+	ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
+	if (ret)
+		goto exit;
+
+	/*
+	 * Get the status of entire LPSS power island per device basis.
+	 * Shutdown both LPSS DMA controllers if and only if all other devices
+	 * are already in D3hot.
+	 */
+	pmc_status = (~(d3_sts_0 | func_dis)) & pmc_mask;
+	if (pmc_status)
+		goto exit;
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
+			LPSS_IOSF_PMCSR, value2, mask2);
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
+			LPSS_IOSF_PMCSR, value2, mask2);
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
+			LPSS_IOSF_GPIODEF0, value1, mask1);
+exit:
+	mutex_unlock(&lpss_iosf_mutex);
+}
+
+static void lpss_iosf_exit_d3_state(void)
+{
+	u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3;
+	u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK;
+	u32 value2 = LPSS_PMCSR_D0;
+	u32 mask2 = LPSS_PMCSR_Dx_MASK;
+
+	mutex_lock(&lpss_iosf_mutex);
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
+			LPSS_IOSF_GPIODEF0, value1, mask1);
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
+			LPSS_IOSF_PMCSR, value2, mask2);
+
+	iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
+			LPSS_IOSF_PMCSR, value2, mask2);
+
+	mutex_unlock(&lpss_iosf_mutex);
+}
+
 static int acpi_lpss_runtime_suspend(struct device *dev)
 {
 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
@@ -640,7 +786,17 @@ static int acpi_lpss_runtime_suspend(struct device *dev)
 	if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 		acpi_lpss_save_ctx(dev, pdata);
 
-	return acpi_dev_runtime_suspend(dev);
+	ret = acpi_dev_runtime_suspend(dev);
+
+	/*
+	 * This call must be last in the sequence, otherwise PMC will return
+	 * wrong status for devices being about to be powered off. See
+	 * lpss_iosf_enter_d3_state() for further information.
+	 */
+	if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
+		lpss_iosf_enter_d3_state();
+
+	return ret;
 }
 
 static int acpi_lpss_runtime_resume(struct device *dev)
@@ -648,10 +804,19 @@ static int acpi_lpss_runtime_resume(struct device *dev)
 	struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
 	int ret;
 
+	/*
+	 * This call is kept first to be in symmetry with
+	 * acpi_lpss_runtime_suspend() one.
+	 */
+	if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
+		lpss_iosf_exit_d3_state();
+
 	ret = acpi_dev_runtime_resume(dev);
 	if (ret)
 		return ret;
 
+	acpi_lpss_d3_to_d0_delay(pdata);
+
 	if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
 		acpi_lpss_restore_ctx(dev, pdata);
 
@@ -660,6 +825,10 @@ static int acpi_lpss_runtime_resume(struct device *dev)
 #endif /* CONFIG_PM */
 
 static struct dev_pm_domain acpi_lpss_pm_domain = {
+#ifdef CONFIG_PM
+	.activate = acpi_lpss_activate,
+	.dismiss = acpi_lpss_dismiss,
+#endif
 	.ops = {
 #ifdef CONFIG_PM
 #ifdef CONFIG_PM_SLEEP
@@ -705,8 +874,14 @@ static int acpi_lpss_platform_notify(struct notifier_block *nb,
 	}
 
 	switch (action) {
-	case BUS_NOTIFY_ADD_DEVICE:
+	case BUS_NOTIFY_BIND_DRIVER:
 		pdev->dev.pm_domain = &acpi_lpss_pm_domain;
+		break;
+	case BUS_NOTIFY_DRIVER_NOT_BOUND:
+	case BUS_NOTIFY_UNBOUND_DRIVER:
+		pdev->dev.pm_domain = NULL;
+		break;
+	case BUS_NOTIFY_ADD_DEVICE:
 		if (pdata->dev_desc->flags & LPSS_LTR)
 			return sysfs_create_group(&pdev->dev.kobj,
 						  &lpss_attr_group);
@@ -714,7 +889,6 @@ static int acpi_lpss_platform_notify(struct notifier_block *nb,
 	case BUS_NOTIFY_DEL_DEVICE:
 		if (pdata->dev_desc->flags & LPSS_LTR)
 			sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
-		pdev->dev.pm_domain = NULL;
 		break;
 	default:
 		break;
@@ -754,10 +928,19 @@ static struct acpi_scan_handler lpss_handler = {
 
 void __init acpi_lpss_init(void)
 {
-	if (!lpt_clk_init()) {
-		bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
-		acpi_scan_add_handler(&lpss_handler);
-	}
+	const struct x86_cpu_id *id;
+	int ret;
+
+	ret = lpt_clk_init();
+	if (ret)
+		return;
+
+	id = x86_match_cpu(lpss_cpu_ids);
+	if (id)
+		lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
+
+	bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
+	acpi_scan_add_handler(&lpss_handler);
 }
 
 #else

drivers/acpi/acpi_pnp.c

@@ -367,7 +367,7 @@ static struct acpi_scan_handler acpi_pnp_handler = {
  */
 static int is_cmos_rtc_device(struct acpi_device *adev)
 {
-	struct acpi_device_id ids[] = {
+	static const struct acpi_device_id ids[] = {
 		{ "PNP0B00" },
 		{ "PNP0B01" },
 		{ "PNP0B02" },

drivers/acpi/acpi_video.c

@@ -77,14 +77,21 @@ module_param(allow_duplicates, bool, 0644);
 static int disable_backlight_sysfs_if = -1;
 module_param(disable_backlight_sysfs_if, int, 0444);
 
+#define REPORT_OUTPUT_KEY_EVENTS		0x01
+#define REPORT_BRIGHTNESS_KEY_EVENTS		0x02
+static int report_key_events = -1;
+module_param(report_key_events, int, 0644);
+MODULE_PARM_DESC(report_key_events,
+	"0: none, 1: output changes, 2: brightness changes, 3: all");
+
 static bool device_id_scheme = false;
 module_param(device_id_scheme, bool, 0444);
 
 static bool only_lcd = false;
 module_param(only_lcd, bool, 0444);
 
-static int register_count;
-static DEFINE_MUTEX(register_count_mutex);
+static DECLARE_COMPLETION(register_done);
+static DEFINE_MUTEX(register_done_mutex);
 static struct mutex video_list_lock;
 static struct list_head video_bus_head;
 static int acpi_video_bus_add(struct acpi_device *device);
@@ -412,6 +419,13 @@ static int video_enable_only_lcd(const struct dmi_system_id *d)
 	return 0;
 }
 
+static int video_set_report_key_events(const struct dmi_system_id *id)
+{
+	if (report_key_events == -1)
+		report_key_events = (uintptr_t)id->driver_data;
+	return 0;
+}
+
 static struct dmi_system_id video_dmi_table[] = {
 	/*
 	 * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
@@ -500,6 +514,24 @@ static struct dmi_system_id video_dmi_table[] = {
 		DMI_MATCH(DMI_PRODUCT_NAME, "ESPRIMO Mobile M9410"),
 		},
 	},
+	/*
+	 * Some machines report wrong key events on the acpi-bus, suppress
+	 * key event reporting on these.  Note this is only intended to work
+	 * around events which are plain wrong. In some cases we get double
+	 * events, in this case acpi-video is considered the canonical source
+	 * and the events from the other source should be filtered. E.g.
+	 * by calling acpi_video_handles_brightness_key_presses() from the
+	 * vendor acpi/wmi driver or by using /lib/udev/hwdb.d/60-keyboard.hwdb
+	 */
+	{
+	 .callback = video_set_report_key_events,
+	 .driver_data = (void *)((uintptr_t)REPORT_OUTPUT_KEY_EVENTS),
+	 .ident = "Dell Vostro V131",
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V131"),
+		},
+	},
 	{}
 };
 
@@ -1480,7 +1512,7 @@ static void acpi_video_bus_notify(struct acpi_device *device, u32 event)
 		/* Something vetoed the keypress. */
 		keycode = 0;
 
-	if (keycode) {
+	if (keycode && (report_key_events & REPORT_OUTPUT_KEY_EVENTS)) {
 		input_report_key(input, keycode, 1);
 		input_sync(input);
 		input_report_key(input, keycode, 0);
@@ -1544,7 +1576,7 @@ static void acpi_video_device_notify(acpi_handle handle, u32 event, void *data)
 
 	acpi_notifier_call_chain(device, event, 0);
 
-	if (keycode) {
+	if (keycode && (report_key_events & REPORT_BRIGHTNESS_KEY_EVENTS)) {
 		input_report_key(input, keycode, 1);
 		input_sync(input);
 		input_report_key(input, keycode, 0);
@@ -2017,8 +2049,8 @@ int acpi_video_register(void)
 {
 	int ret = 0;
 
-	mutex_lock(&register_count_mutex);
-	if (register_count) {
+	mutex_lock(&register_done_mutex);
+	if (completion_done(&register_done)) {
 		/*
 		 * if the function of acpi_video_register is already called,
 		 * don't register the acpi_vide_bus again and return no error.
@@ -2039,22 +2071,22 @@ int acpi_video_register(void)
 	 * When the acpi_video_bus is loaded successfully, increase
 	 * the counter reference.
 	 */
-	register_count = 1;
+	complete(&register_done);
 
 leave:
-	mutex_unlock(&register_count_mutex);
+	mutex_unlock(&register_done_mutex);
 	return ret;
 }
 EXPORT_SYMBOL(acpi_video_register);
 
 void acpi_video_unregister(void)
 {
-	mutex_lock(&register_count_mutex);
-	if (register_count) {
+	mutex_lock(&register_done_mutex);
+	if (completion_done(&register_done)) {
 		acpi_bus_unregister_driver(&acpi_video_bus);
-		register_count = 0;
+		reinit_completion(&register_done);
 	}
-	mutex_unlock(&register_count_mutex);
+	mutex_unlock(&register_done_mutex);
 }
 EXPORT_SYMBOL(acpi_video_unregister);
 
@@ -2062,15 +2094,29 @@ void acpi_video_unregister_backlight(void)
 {
 	struct acpi_video_bus *video;
 
-	mutex_lock(&register_count_mutex);
-	if (register_count) {
+	mutex_lock(&register_done_mutex);
+	if (completion_done(&register_done)) {
 		mutex_lock(&video_list_lock);
 		list_for_each_entry(video, &video_bus_head, entry)
 			acpi_video_bus_unregister_backlight(video);
 		mutex_unlock(&video_list_lock);
 	}
-	mutex_unlock(&register_count_mutex);
+	mutex_unlock(&register_done_mutex);
+}
+
+bool acpi_video_handles_brightness_key_presses(void)
+{
+	bool have_video_busses;
+
+	wait_for_completion(&register_done);
+	mutex_lock(&video_list_lock);
+	have_video_busses = !list_empty(&video_bus_head);
+	mutex_unlock(&video_list_lock);
+
+	return have_video_busses &&
+	       (report_key_events & REPORT_BRIGHTNESS_KEY_EVENTS);
 }
+EXPORT_SYMBOL(acpi_video_handles_brightness_key_presses);
 
 /*
  * This is kind of nasty. Hardware using Intel chipsets may require

drivers/acpi/acpica/Makefile

@@ -50,6 +50,7 @@ acpi-y +=		\
 	exdump.o	\
 	exfield.o	\
 	exfldio.o	\
+	exmisc.o	\
 	exmutex.o	\
 	exnames.o	\
 	exoparg1.o	\
@@ -57,7 +58,6 @@ acpi-y +=		\
 	exoparg3.o	\
 	exoparg6.o	\
 	exprep.o	\
-	exmisc.o	\
 	exregion.o	\
 	exresnte.o	\
 	exresolv.o	\
@@ -66,6 +66,7 @@ acpi-y +=		\
 	exstoren.o	\
 	exstorob.o	\
 	exsystem.o	\
+	extrace.o	\
 	exutils.o
 
 acpi-y +=		\
@@ -196,7 +197,6 @@ acpi-$(ACPI_FUTURE_USAGE) +=	\
 	dbfileio.o		\
 	dbtest.o		\
 	utcache.o		\
-	utfileio.o		\
 	utprint.o		\
 	uttrack.o		\
 	utuuid.o

drivers/acpi/acpica/acapps.h

@@ -44,6 +44,8 @@
 #ifndef _ACAPPS
 #define _ACAPPS
 
+#include <stdio.h>
+
 /* Common info for tool signons */
 
 #define ACPICA_NAME                 "Intel ACPI Component Architecture"
@@ -85,11 +87,40 @@
 	acpi_os_printf (description);
 
 #define ACPI_OPTION(name, description) \
-	acpi_os_printf (" %-18s%s\n", name, description);
+	acpi_os_printf (" %-20s%s\n", name, description);
+
+/* Check for unexpected exceptions */
+
+#define ACPI_CHECK_STATUS(name, status, expected) \
+	if (status != expected) \
+	{ \
+		acpi_os_printf ("Unexpected %s from %s (%s-%d)\n", \
+			acpi_format_exception (status), #name, _acpi_module_name, __LINE__); \
+	}
+
+/* Check for unexpected non-AE_OK errors */
+
+#define ACPI_CHECK_OK(name, status)   ACPI_CHECK_STATUS (name, status, AE_OK);
 
 #define FILE_SUFFIX_DISASSEMBLY     "dsl"
 #define FILE_SUFFIX_BINARY_TABLE    ".dat"	/* Needs the dot */
 
+/* acfileio */
+
+acpi_status
+ac_get_all_tables_from_file(char *filename,
+			    u8 get_only_aml_tables,
+			    struct acpi_new_table_desc **return_list_head);
+
+u8 ac_is_file_binary(FILE * file);
+
+acpi_status ac_validate_table_header(FILE * file, long table_offset);
+
+/* Values for get_only_aml_tables */
+
+#define ACPI_GET_ONLY_AML_TABLES    TRUE
+#define ACPI_GET_ALL_TABLES         FALSE
+
 /*
  * getopt
  */
@@ -107,30 +138,6 @@ extern char *acpi_gbl_optarg;
  */
 u32 cm_get_file_size(ACPI_FILE file);
 
-#ifndef ACPI_DUMP_APP
-/*
- * adisasm
- */
-acpi_status
-ad_aml_disassemble(u8 out_to_file,
-		   char *filename, char *prefix, char **out_filename);
-
-void ad_print_statistics(void);
-
-acpi_status ad_find_dsdt(u8 **dsdt_ptr, u32 *dsdt_length);
-
-void ad_dump_tables(void);
-
-acpi_status ad_get_local_tables(void);
-
-acpi_status
-ad_parse_table(struct acpi_table_header *table,
-	       acpi_owner_id * owner_id, u8 load_table, u8 external);
-
-acpi_status ad_display_tables(char *filename, struct acpi_table_header *table);
-
-acpi_status ad_display_statistics(void);
-
 /*
  * adwalk
  */
@@ -168,6 +175,5 @@ char *ad_generate_filename(char *prefix, char *table_id);
 void
 ad_write_table(struct acpi_table_header *table,
 	       u32 length, char *table_name, char *oem_table_id);
-#endif
 
 #endif				/* _ACAPPS */

drivers/acpi/acpica/acdebug.h

@@ -80,9 +80,15 @@ struct acpi_db_execute_walk {
 /*
  * dbxface - external debugger interfaces
  */
-acpi_status
-acpi_db_single_step(struct acpi_walk_state *walk_state,
-		    union acpi_parse_object *op, u32 op_type);
+ACPI_DBR_DEPENDENT_RETURN_OK(acpi_status
+			     acpi_db_single_step(struct acpi_walk_state
+						 *walk_state,
+						 union acpi_parse_object *op,
+						 u32 op_type))
+ ACPI_DBR_DEPENDENT_RETURN_VOID(void
+				acpi_db_signal_break_point(struct
+							   acpi_walk_state
+							   *walk_state))
 
 /*
  * dbcmds - debug commands and output routines
@@ -182,11 +188,15 @@ void acpi_db_display_method_info(union acpi_parse_object *op);
 
 void acpi_db_decode_and_display_object(char *target, char *output_type);
 
-void
-acpi_db_display_result_object(union acpi_operand_object *obj_desc,
-			      struct acpi_walk_state *walk_state);
+ACPI_DBR_DEPENDENT_RETURN_VOID(void
+			       acpi_db_display_result_object(union
+							     acpi_operand_object
+							     *obj_desc,
+							     struct
+							     acpi_walk_state
+							     *walk_state))
 
-acpi_status acpi_db_display_all_methods(char *display_count_arg);
+ acpi_status acpi_db_display_all_methods(char *display_count_arg);
 
 void acpi_db_display_arguments(void);
 
@@ -198,9 +208,13 @@ void acpi_db_display_calling_tree(void);
 
 void acpi_db_display_object_type(char *object_arg);
 
-void
-acpi_db_display_argument_object(union acpi_operand_object *obj_desc,
-				struct acpi_walk_state *walk_state);
+ACPI_DBR_DEPENDENT_RETURN_VOID(void
+			       acpi_db_display_argument_object(union
+							       acpi_operand_object
+							       *obj_desc,
+							       struct
+							       acpi_walk_state
+							       *walk_state))
 
 /*
  * dbexec - debugger control method execution
@@ -231,10 +245,7 @@ void acpi_db_open_debug_file(char *name);
 
 acpi_status acpi_db_load_acpi_table(char *filename);
 
-acpi_status
-acpi_db_get_table_from_file(char *filename,
-			    struct acpi_table_header **table,
-			    u8 must_be_aml_table);
+acpi_status acpi_db_load_tables(struct acpi_new_table_desc *list_head);
 
 /*
  * dbhistry - debugger HISTORY command
@@ -257,7 +268,7 @@ acpi_db_command_dispatch(char *input_buffer,
 
 void ACPI_SYSTEM_XFACE acpi_db_execute_thread(void *context);
 
-acpi_status acpi_db_user_commands(char prompt, union acpi_parse_object *op);
+acpi_status acpi_db_user_commands(void);
 
 char *acpi_db_get_next_token(char *string,
 			     char **next, acpi_object_type * return_type);

drivers/acpi/acpica/acevents.h

@@ -161,6 +161,11 @@ acpi_ev_delete_gpe_handlers(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
 /*
  * evhandler - Address space handling
  */
+union acpi_operand_object *acpi_ev_find_region_handler(acpi_adr_space_type
+						       space_id,
+						       union acpi_operand_object
+						       *handler_obj);
+
 u8
 acpi_ev_has_default_handler(struct acpi_namespace_node *node,
 			    acpi_adr_space_type space_id);
@@ -193,9 +198,11 @@ void
 acpi_ev_detach_region(union acpi_operand_object *region_obj,
 		      u8 acpi_ns_is_locked);
 
-acpi_status
+void acpi_ev_associate_reg_method(union acpi_operand_object *region_obj);
+
+void
 acpi_ev_execute_reg_methods(struct acpi_namespace_node *node,
-			    acpi_adr_space_type space_id);
+			    acpi_adr_space_type space_id, u32 function);
 
 acpi_status
 acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function);

drivers/acpi/acpica/acglobal.h

@@ -145,6 +145,7 @@ ACPI_GLOBAL(acpi_cache_t *, acpi_gbl_operand_cache);
 
 ACPI_INIT_GLOBAL(u32, acpi_gbl_startup_flags, 0);
 ACPI_INIT_GLOBAL(u8, acpi_gbl_shutdown, TRUE);
+ACPI_INIT_GLOBAL(u8, acpi_gbl_early_initialization, TRUE);
 
 /* Global handlers */
 
@@ -164,7 +165,7 @@ ACPI_GLOBAL(u8, acpi_gbl_next_owner_id_offset);
 
 /* Initialization sequencing */
 
-ACPI_GLOBAL(u8, acpi_gbl_reg_methods_executed);
+ACPI_INIT_GLOBAL(u8, acpi_gbl_reg_methods_enabled, FALSE);
 
 /* Misc */
 
@@ -326,7 +327,6 @@ ACPI_GLOBAL(struct acpi_external_file *, acpi_gbl_external_file_list);
 #ifdef ACPI_DEBUGGER
 
 ACPI_INIT_GLOBAL(u8, acpi_gbl_abort_method, FALSE);
-ACPI_INIT_GLOBAL(u8, acpi_gbl_method_executing, FALSE);
 ACPI_INIT_GLOBAL(acpi_thread_id, acpi_gbl_db_thread_id, ACPI_INVALID_THREAD_ID);
 
 ACPI_GLOBAL(u8, acpi_gbl_db_opt_no_ini_methods);
@@ -345,7 +345,6 @@ ACPI_GLOBAL(acpi_object_type, acpi_gbl_db_arg_types[ACPI_DEBUGGER_MAX_ARGS]);
 
 /* These buffers should all be the same size */
 
-ACPI_GLOBAL(char, acpi_gbl_db_line_buf[ACPI_DB_LINE_BUFFER_SIZE]);
 ACPI_GLOBAL(char, acpi_gbl_db_parsed_buf[ACPI_DB_LINE_BUFFER_SIZE]);
 ACPI_GLOBAL(char, acpi_gbl_db_scope_buf[ACPI_DB_LINE_BUFFER_SIZE]);
 ACPI_GLOBAL(char, acpi_gbl_db_debug_filename[ACPI_DB_LINE_BUFFER_SIZE]);
@@ -360,9 +359,6 @@ ACPI_GLOBAL(u16, acpi_gbl_node_type_count_misc);
 ACPI_GLOBAL(u32, acpi_gbl_num_nodes);
 ACPI_GLOBAL(u32, acpi_gbl_num_objects);
 
-ACPI_GLOBAL(acpi_mutex, acpi_gbl_db_command_ready);
-ACPI_GLOBAL(acpi_mutex, acpi_gbl_db_command_complete);
-
 #endif				/* ACPI_DEBUGGER */
 
 /*****************************************************************************

drivers/acpi/acpica/aclocal.h

@@ -219,6 +219,13 @@ struct acpi_table_list {
 #define ACPI_ROOT_ORIGIN_ALLOCATED      (1)
 #define ACPI_ROOT_ALLOW_RESIZE          (2)
 
+/* List to manage incoming ACPI tables */
+
+struct acpi_new_table_desc {
+	struct acpi_table_header *table;
+	struct acpi_new_table_desc *next;
+};
+
 /* Predefined table indexes */
 
 #define ACPI_INVALID_TABLE_INDEX        (0xFFFFFFFF)
@@ -388,7 +395,8 @@ union acpi_predefined_info {
 
 /* Return object auto-repair info */
 
-typedef acpi_status(*acpi_object_converter) (union acpi_operand_object
+typedef acpi_status(*acpi_object_converter) (struct acpi_namespace_node * scope,
+					     union acpi_operand_object
 					     *original_object,
 					     union acpi_operand_object
 					     **converted_object);
@@ -420,6 +428,7 @@ struct acpi_simple_repair_info {
 
 struct acpi_reg_walk_info {
 	acpi_adr_space_type space_id;
+	u32 function;
 	u32 reg_run_count;
 };
 
@@ -861,6 +870,7 @@ struct acpi_parse_state {
 #define ACPI_PARSEOP_CLOSING_PAREN      0x10
 #define ACPI_PARSEOP_COMPOUND           0x20
 #define ACPI_PARSEOP_ASSIGNMENT         0x40
+#define ACPI_PARSEOP_ELSEIF             0x80
 
 /*****************************************************************************
  *

drivers/acpi/acpica/acmacros.h

@@ -400,17 +400,6 @@
 #define ACPI_HW_OPTIONAL_FUNCTION(addr)     NULL
 #endif
 
-/*
- * Some code only gets executed when the debugger is built in.
- * Note that this is entirely independent of whether the
- * DEBUG_PRINT stuff (set by ACPI_DEBUG_OUTPUT) is on, or not.
- */
-#ifdef ACPI_DEBUGGER
-#define ACPI_DEBUGGER_EXEC(a)           a
-#else
-#define ACPI_DEBUGGER_EXEC(a)
-#endif
-
 /*
  * Macros used for ACPICA utilities only
  */

drivers/acpi/acpica/acnamesp.h

@@ -77,6 +77,7 @@
 /* Object is not a package element */
 
 #define ACPI_NOT_PACKAGE_ELEMENT    ACPI_UINT32_MAX
+#define ACPI_ALL_PACKAGE_ELEMENTS   (ACPI_UINT32_MAX-1)
 
 /* Always emit warning message, not dependent on node flags */
 
@@ -183,13 +184,20 @@ acpi_ns_convert_to_buffer(union acpi_operand_object *original_object,
 			  union acpi_operand_object **return_object);
 
 acpi_status
-acpi_ns_convert_to_unicode(union acpi_operand_object *original_object,
+acpi_ns_convert_to_unicode(struct acpi_namespace_node *scope,
+			   union acpi_operand_object *original_object,
 			   union acpi_operand_object **return_object);
 
 acpi_status
-acpi_ns_convert_to_resource(union acpi_operand_object *original_object,
+acpi_ns_convert_to_resource(struct acpi_namespace_node *scope,
+			    union acpi_operand_object *original_object,
 			    union acpi_operand_object **return_object);
 
+acpi_status
+acpi_ns_convert_to_reference(struct acpi_namespace_node *scope,
+			     union acpi_operand_object *original_object,
+			     union acpi_operand_object **return_object);
+
 /*
  * nsdump - Namespace dump/print utilities
  */

drivers/acpi/acpica/acobject.h

@@ -93,9 +93,10 @@
 #define AOPOBJ_AML_CONSTANT         0x01	/* Integer is an AML constant */
 #define AOPOBJ_STATIC_POINTER       0x02	/* Data is part of an ACPI table, don't delete */
 #define AOPOBJ_DATA_VALID           0x04	/* Object is initialized and data is valid */
-#define AOPOBJ_OBJECT_INITIALIZED   0x08	/* Region is initialized, _REG was run */
-#define AOPOBJ_SETUP_COMPLETE       0x10	/* Region setup is complete */
-#define AOPOBJ_INVALID              0x20	/* Host OS won't allow a Region address */
+#define AOPOBJ_OBJECT_INITIALIZED   0x08	/* Region is initialized */
+#define AOPOBJ_REG_CONNECTED        0x10	/* _REG was run */
+#define AOPOBJ_SETUP_COMPLETE       0x20	/* Region setup is complete */
+#define AOPOBJ_INVALID              0x40	/* Host OS won't allow a Region address */
 
 /******************************************************************************
  *

drivers/acpi/acpica/acparser.h

@@ -92,7 +92,13 @@ acpi_ps_get_next_simple_arg(struct acpi_parse_state *parser_state,
 acpi_status
 acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state,
 			  struct acpi_parse_state *parser_state,
-			  union acpi_parse_object *arg, u8 method_call);
+			  union acpi_parse_object *arg,
+			  u8 possible_method_call);
+
+/* Values for u8 above */
+
+#define ACPI_NOT_METHOD_CALL            FALSE
+#define ACPI_POSSIBLE_METHOD_CALL       TRUE
 
 acpi_status
 acpi_ps_get_next_arg(struct acpi_walk_state *walk_state,

drivers/acpi/acpica/amlcode.h

@@ -120,7 +120,7 @@
 #define AML_CREATE_WORD_FIELD_OP    (u16) 0x8b
 #define AML_CREATE_BYTE_FIELD_OP    (u16) 0x8c
 #define AML_CREATE_BIT_FIELD_OP     (u16) 0x8d
-#define AML_TYPE_OP                 (u16) 0x8e
+#define AML_OBJECT_TYPE_OP          (u16) 0x8e
 #define AML_CREATE_QWORD_FIELD_OP   (u16) 0x8f	/* ACPI 2.0 */
 #define AML_LAND_OP                 (u16) 0x90
 #define AML_LOR_OP                  (u16) 0x91
@@ -238,7 +238,8 @@
 #define ARGP_TERMLIST               0x0F
 #define ARGP_WORDDATA               0x10
 #define ARGP_QWORDDATA              0x11
-#define ARGP_SIMPLENAME             0x12
+#define ARGP_SIMPLENAME             0x12	/* name_string | local_term | arg_term */
+#define ARGP_NAME_OR_REF            0x13	/* For object_type only */
 
 /*
  * Resolved argument types for the AML Interpreter