Commit 51c3bb1d authored by Thomas Petazzoni's avatar Thomas Petazzoni Committed by Greg Kroah-Hartman

mtd: nand: fsmc: fix NAND width handling

commit ee56874f upstream.

In commit eea62819 ("mtd: Add device-tree support to fsmc_nand"),
Device Tree support was added to the fmsc_nand driver. However, this
code has a bug in how it handles the bank-width DT property to set the
bus width.

Indeed, in the function fsmc_nand_probe_config_dt() that parses the
Device Tree, it sets pdata->width to either 8 or 16 depending on the
value of the bank-width DT property.

Then, the ->probe() function will test if pdata->width is equal to
FSMC_NAND_BW16 (which is 2) to set NAND_BUSWIDTH_16 in
nand->options. Therefore, with the DT probing, this condition will never
match.

This commit fixes that by removing the "width" field from
fsmc_nand_platform_data and instead have the fsmc_nand_probe_config_dt()
function directly set the appropriate nand->options value.

It is worth mentioning that if this commit gets backported to older
kernels, prior to the drop of non-DT probing, then non-DT probing will
be broken because nand->options will no longer be set to
NAND_BUSWIDTH_16.

Fixes: eea62819 ("mtd: Add device-tree support to fsmc_nand")
Signed-off-by: default avatarThomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarBoris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent f34b2f6f
......@@ -150,7 +150,6 @@ struct fsmc_nand_platform_data {
struct mtd_partition *partitions;
unsigned int nr_partitions;
unsigned int options;
unsigned int width;
unsigned int bank;
enum access_mode mode;
......@@ -844,18 +843,19 @@ static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
u32 val;
int ret;
/* Set default NAND width to 8 bits */
pdata->width = 8;
pdata->options = 0;
if (!of_property_read_u32(np, "bank-width", &val)) {
if (val == 2) {
pdata->width = 16;
pdata->options |= NAND_BUSWIDTH_16;
} else if (val != 1) {
dev_err(&pdev->dev, "invalid bank-width %u\n", val);
return -EINVAL;
}
}
if (of_get_property(np, "nand-skip-bbtscan", NULL))
pdata->options = NAND_SKIP_BBTSCAN;
pdata->options |= NAND_SKIP_BBTSCAN;
pdata->nand_timings = devm_kzalloc(&pdev->dev,
sizeof(*pdata->nand_timings), GFP_KERNEL);
......@@ -992,9 +992,6 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
nand->badblockbits = 7;
nand_set_flash_node(nand, np);
if (pdata->width == FSMC_NAND_BW16)
nand->options |= NAND_BUSWIDTH_16;
switch (host->mode) {
case USE_DMA_ACCESS:
dma_cap_zero(mask);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment