Staging: delete tty drivers

Delete the drivers/staging/tty drivers as no one has wanted to step up
and maintain and fix them.  This was discussed in commit
4a6514e6 (tty: move obsolete and broken
tty drivers to drivers/staging/tty/)

Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/staging/Kconfig

@@ -24,8 +24,6 @@ menuconfig STAGING
 
 if STAGING
 
-source "drivers/staging/tty/Kconfig"
-
 source "drivers/staging/et131x/Kconfig"
 
 source "drivers/staging/slicoss/Kconfig"

drivers/staging/Makefile

@@ -3,7 +3,6 @@
 # fix for build system bug...
 obj-$(CONFIG_STAGING)		+= staging.o
 
-obj-y += tty/
 obj-$(CONFIG_ET131X)		+= et131x/
 obj-$(CONFIG_SLICOSS)		+= slicoss/
 obj-$(CONFIG_VIDEO_GO7007)	+= go7007/

drivers/staging/tty/Kconfig

-config STALLION
-	tristate "Stallion EasyIO or EC8/32 support"
-	depends on STALDRV && (ISA || EISA || PCI)
-	help
-	  If you have an EasyIO or EasyConnection 8/32 multiport Stallion
-	  card, then this is for you; say Y.  Make sure to read
-	  <file:Documentation/serial/stallion.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called stallion.
-
-config ISTALLION
-	tristate "Stallion EC8/64, ONboard, Brumby support"
-	depends on STALDRV && (ISA || EISA || PCI)
-	help
-	  If you have an EasyConnection 8/64, ONboard, Brumby or Stallion
-	  serial multiport card, say Y here. Make sure to read
-	  <file:Documentation/serial/stallion.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called istallion.
-
-config DIGIEPCA
-	tristate "Digiboard Intelligent Async Support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-	---help---
-	  This is a driver for Digi International's Xx, Xeve, and Xem series
-	  of cards which provide multiple serial ports. You would need
-	  something like this to connect more than two modems to your Linux
-	  box, for instance in order to become a dial-in server. This driver
-	  supports the original PC (ISA) boards as well as PCI, and EISA. If
-	  you have a card like this, say Y here and read the file
-	  <file:Documentation/serial/digiepca.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called epca.
-
-config RISCOM8
-	tristate "SDL RISCom/8 card support"
-	depends on SERIAL_NONSTANDARD
-	help
-	  This is a driver for the SDL Communications RISCom/8 multiport card,
-	  which gives you many serial ports. You would need something like
-	  this to connect more than two modems to your Linux box, for instance
-	  in order to become a dial-in server. If you have a card like that,
-	  say Y here and read the file <file:Documentation/serial/riscom8.txt>.
-
-	  Also it's possible to say M here and compile this driver as kernel
-	  loadable module; the module will be called riscom8.
-
-config SPECIALIX
-	tristate "Specialix IO8+ card support"
-	depends on SERIAL_NONSTANDARD
-	help
-	  This is a driver for the Specialix IO8+ multiport card (both the
-	  ISA and the PCI version) which gives you many serial ports. You
-	  would need something like this to connect more than two modems to
-	  your Linux box, for instance in order to become a dial-in server.
-
-	  If you have a card like that, say Y here and read the file
-	  <file:Documentation/serial/specialix.txt>. Also it's possible to say
-	  M here and compile this driver as kernel loadable module which will be
-	  called specialix.
-
-config COMPUTONE
-	tristate "Computone IntelliPort Plus serial support"
-	depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI)
-	---help---
-	  This driver supports the entire family of Intelliport II/Plus
-	  controllers with the exception of the MicroChannel controllers and
-	  products previous to the Intelliport II. These are multiport cards,
-	  which give you many serial ports. You would need something like this
-	  to connect more than two modems to your Linux box, for instance in
-	  order to become a dial-in server. If you have a card like that, say
-	  Y here and read <file:Documentation/serial/computone.txt>.
-
-	  To compile this driver as module, choose M here: the
-	  module will be called ip2.
-
-config SERIAL167
-	bool "CD2401 support for MVME166/7 serial ports"
-	depends on MVME16x
-	help
-	  This is the driver for the serial ports on the Motorola MVME166,
-	  167, and 172 boards.  Everyone using one of these boards should say
-	  Y here.
-

drivers/staging/tty/Makefile

-obj-$(CONFIG_STALLION)		+= stallion.o
-obj-$(CONFIG_ISTALLION)		+= istallion.o
-obj-$(CONFIG_DIGIEPCA)		+= epca.o
-obj-$(CONFIG_SERIAL167)		+= serial167.o
-obj-$(CONFIG_SPECIALIX)		+= specialix.o
-obj-$(CONFIG_RISCOM8)		+= riscom8.o
-obj-$(CONFIG_COMPUTONE)		+= ip2/

drivers/staging/tty/TODO

-These are a few tty/serial drivers that either do not build,
-or work if they do build, or if they seem to work, are for obsolete
-hardware, or are full of unfixable races and no one uses them anymore.
-
-If no one steps up to adopt any of these drivers, they will be removed
-in the 2.6.41 release.

drivers/staging/tty/digi1.h

-/*          Definitions for DigiBoard ditty(1) command.                 */
-
-#if !defined(TIOCMODG)
-#define	TIOCMODG	(('d'<<8) | 250)	/* get modem ctrl state	*/
-#define	TIOCMODS	(('d'<<8) | 251)	/* set modem ctrl state	*/
-#endif
-
-#if !defined(TIOCMSET)
-#define	TIOCMSET	(('d'<<8) | 252)	/* set modem ctrl state	*/
-#define	TIOCMGET	(('d'<<8) | 253)	/* set modem ctrl state	*/
-#endif
-
-#if !defined(TIOCMBIC)
-#define	TIOCMBIC	(('d'<<8) | 254)	/* set modem ctrl state */
-#define	TIOCMBIS	(('d'<<8) | 255)	/* set modem ctrl state */
-#endif
-
-#if !defined(TIOCSDTR)
-#define	TIOCSDTR	(('e'<<8) | 0)		/* set DTR		*/
-#define	TIOCCDTR	(('e'<<8) | 1)		/* clear DTR		*/
-#endif
-
-/************************************************************************
- * Ioctl command arguments for DIGI parameters.
- ************************************************************************/
-#define DIGI_GETA	(('e'<<8) | 94)		/* Read params		*/
-
-#define DIGI_SETA	(('e'<<8) | 95)		/* Set params		*/
-#define DIGI_SETAW	(('e'<<8) | 96)		/* Drain & set params	*/
-#define DIGI_SETAF	(('e'<<8) | 97)		/* Drain, flush & set params */
-
-#define	DIGI_GETFLOW	(('e'<<8) | 99)		/* Get startc/stopc flow */
-						/* control characters 	 */
-#define	DIGI_SETFLOW	(('e'<<8) | 100)	/* Set startc/stopc flow */
-						/* control characters	 */
-#define	DIGI_GETAFLOW	(('e'<<8) | 101)	/* Get Aux. startc/stopc */
-						/* flow control chars 	 */
-#define	DIGI_SETAFLOW	(('e'<<8) | 102)	/* Set Aux. startc/stopc */
-						/* flow control chars	 */
-
-#define	DIGI_GETINFO	(('e'<<8) | 103)	/* Fill in digi_info */
-#define	DIGI_POLLER	(('e'<<8) | 104)	/* Turn on/off poller */
-#define	DIGI_INIT	(('e'<<8) | 105)	/* Allow things to run. */
-
-struct	digiflow_struct 
-{
-	unsigned char	startc;				/* flow cntl start char	*/
-	unsigned char	stopc;				/* flow cntl stop char	*/
-};
-
-typedef struct digiflow_struct digiflow_t;
-
-
-/************************************************************************
- * Values for digi_flags 
- ************************************************************************/
-#define DIGI_IXON	0x0001		/* Handle IXON in the FEP	*/
-#define DIGI_FAST	0x0002		/* Fast baud rates		*/
-#define RTSPACE		0x0004		/* RTS input flow control	*/
-#define CTSPACE		0x0008		/* CTS output flow control	*/
-#define DSRPACE		0x0010		/* DSR output flow control	*/
-#define DCDPACE		0x0020		/* DCD output flow control	*/
-#define DTRPACE		0x0040		/* DTR input flow control	*/
-#define DIGI_FORCEDCD	0x0100		/* Force carrier		*/
-#define	DIGI_ALTPIN	0x0200		/* Alternate RJ-45 pin config	*/
-#define	DIGI_AIXON	0x0400		/* Aux flow control in fep	*/
-
-
-/************************************************************************
- * Values for digiDload
- ************************************************************************/
-#define NORMAL  0
-#define PCI_CTL 1
-
-#define SIZE8  0
-#define SIZE16 1
-#define SIZE32 2
-
-/************************************************************************
- * Structure used with ioctl commands for DIGI parameters.
- ************************************************************************/
-struct digi_struct 
-{
-	unsigned short	digi_flags;		/* Flags (see above)	*/
-};
-
-typedef struct digi_struct digi_t;
-
-struct digi_info 
-{
-	unsigned long board;        /* Which board is this ? */
-	unsigned char status;       /* Alive or dead */
-	unsigned char type;         /* see epca.h */
-	unsigned char subtype;      /* For future XEM, XR, etc ... */
-	unsigned short numports;    /* Number of ports configured */
-	unsigned char *port;        /* I/O Address */
-	unsigned char *membase;     /* DPR Address */
-	unsigned char *version;     /* For future ... */
-	unsigned short windowData;  /* For future ... */
-} ;

drivers/staging/tty/digiFep1.h

-
-#define CSTART       0x400L
-#define CMAX         0x800L
-#define ISTART       0x800L
-#define IMAX         0xC00L
-#define CIN          0xD10L
-#define GLOBAL       0xD10L
-#define EIN          0xD18L
-#define FEPSTAT      0xD20L
-#define CHANSTRUCT   0x1000L
-#define RXTXBUF      0x4000L
-
-
-struct global_data 
-{
-	u16 cin;
-	u16 cout;
-	u16 cstart;
-	u16 cmax;
-	u16 ein;
-	u16 eout;
-	u16 istart;
-	u16 imax;
-};
-
-
-struct board_chan 
-{
-	u32 filler1;
-	u32 filler2;
-	u16 tseg;
-	u16 tin;
-	u16 tout;
-	u16 tmax;
-
-	u16 rseg;
-	u16 rin;
-	u16 rout;
-	u16 rmax;
-
-	u16 tlow;
-	u16 rlow;
-	u16 rhigh;
-	u16 incr;
-
-	u16 etime;
-	u16 edelay;
-	unchar *dev;
-
-	u16 iflag;
-	u16 oflag;
-	u16 cflag;
-	u16 gmask;
-
-	u16 col;
-	u16 delay;
-	u16 imask;
-	u16 tflush;
-
-	u32 filler3;
-	u32 filler4;
-	u32 filler5;
-	u32 filler6;
-
-	u8 num;
-	u8 ract;
-	u8 bstat;
-	u8 tbusy;
-	u8 iempty;
-	u8 ilow;
-	u8 idata;
-	u8 eflag;
-
-	u8 tflag;
-	u8 rflag;
-	u8 xmask;
-	u8 xval;
-	u8 mstat;
-	u8 mchange;
-	u8 mint;
-	u8 lstat;
-
-	u8 mtran;
-	u8 orun;
-	u8 startca;
-	u8 stopca;
-	u8 startc;
-	u8 stopc;
-	u8 vnext;
-	u8 hflow;
-
-	u8 fillc;
-	u8 ochar;
-	u8 omask;
-
-	u8 filler7;
-	u8 filler8[28];
-}; 
-
-
-#define SRXLWATER      0xE0
-#define SRXHWATER      0xE1
-#define STOUT          0xE2
-#define PAUSETX        0xE3
-#define RESUMETX       0xE4
-#define SAUXONOFFC     0xE6
-#define SENDBREAK      0xE8
-#define SETMODEM       0xE9
-#define SETIFLAGS      0xEA
-#define SONOFFC        0xEB
-#define STXLWATER      0xEC
-#define PAUSERX        0xEE
-#define RESUMERX       0xEF
-#define SETBUFFER      0xF2
-#define SETCOOKED      0xF3
-#define SETHFLOW       0xF4
-#define SETCTRLFLAGS   0xF5
-#define SETVNEXT       0xF6
-
-
-
-#define BREAK_IND        0x01
-#define LOWTX_IND        0x02
-#define EMPTYTX_IND      0x04
-#define DATA_IND         0x08
-#define MODEMCHG_IND     0x20
-
-#define FEP_HUPCL  0002000
-#if 0
-#define RTS   0x02
-#define CD    0x08
-#define DSR   0x10
-#define CTS   0x20
-#define RI    0x40
-#define DTR   0x80
-#endif

drivers/staging/tty/digiPCI.h

-/*************************************************************************
- * Defines and structure definitions for PCI BIOS Interface 
- *************************************************************************/
-#define	PCIMAX  32		/* maximum number of PCI boards */
-
-
-#define	PCI_VENDOR_DIGI		0x114F
-#define	PCI_DEVICE_EPC		0x0002
-#define	PCI_DEVICE_RIGHTSWITCH 0x0003  /* For testing */
-#define	PCI_DEVICE_XEM		0x0004
-#define	PCI_DEVICE_XR		0x0005
-#define	PCI_DEVICE_CX		0x0006
-#define	PCI_DEVICE_XRJ		0x0009   /* Jupiter boards with */
-#define	PCI_DEVICE_EPCJ		0x000a   /* PLX 9060 chip for PCI  */
-
-
-/*
- * On the PCI boards, there is no IO space allocated 
- * The I/O registers will be in the first 3 bytes of the   
- * upper 2MB of the 4MB memory space.  The board memory 
- * will be mapped into the low 2MB of the 4MB memory space 
- */
-
-/* Potential location of PCI Bios from E0000 to FFFFF*/
-#define PCI_BIOS_SIZE		0x00020000	
-
-/* Size of Memory and I/O for PCI (4MB) */
-#define PCI_RAM_SIZE		0x00400000	
-
-/* Size of Memory (2MB) */
-#define PCI_MEM_SIZE		0x00200000	
-
-/* Offset of I/0 in Memory (2MB) */
-#define PCI_IO_OFFSET 		0x00200000	
-
-#define MEMOUTB(basemem, pnum, setmemval)  *(caddr_t)((basemem) + ( PCI_IO_OFFSET | pnum << 4 | pnum )) = (setmemval)
-#define MEMINB(basemem, pnum)  *(caddr_t)((basemem) + (PCI_IO_OFFSET | pnum << 4 | pnum ))   /* for PCI I/O */
-
-
-
-
-

drivers/staging/tty/epca.h

-#define XEMPORTS    0xC02
-#define XEPORTS     0xC22
-
-#define MAX_ALLOC   0x100
-
-#define MAXBOARDS   12
-#define FEPCODESEG  0x0200L
-#define FEPCODE     0x2000L
-#define BIOSCODE    0xf800L
-
-#define MISCGLOBAL  0x0C00L
-#define NPORT       0x0C22L
-#define MBOX        0x0C40L
-#define PORTBASE    0x0C90L
-
-/* Begin code defines used for epca_setup */
-
-#define INVALID_BOARD_TYPE   0x1
-#define INVALID_NUM_PORTS    0x2
-#define INVALID_MEM_BASE     0x4
-#define INVALID_PORT_BASE    0x8
-#define INVALID_BOARD_STATUS 0x10
-#define INVALID_ALTPIN       0x20
-
-/* End code defines used for epca_setup */
-
-
-#define FEPCLR      0x00
-#define FEPMEM      0x02
-#define FEPRST      0x04
-#define FEPINT      0x08
-#define	FEPMASK     0x0e
-#define	FEPWIN      0x80
-
-#define PCXE    0
-#define PCXEVE  1
-#define PCXEM   2   
-#define EISAXEM 3
-#define PC64XE  4
-#define PCXI    5
-#define PCIXEM  7
-#define PCICX   8
-#define PCIXR   9
-#define PCIXRJ  10
-#define EPCA_NUM_TYPES 6
-
-
-static char *board_desc[] = 
-{
-	"PC/Xe",
-	"PC/Xeve",
-	"PC/Xem",
-	"EISA/Xem",
-	"PC/64Xe",
-	"PC/Xi",
-	"unknown",
-	"PCI/Xem",
-	"PCI/CX",
-	"PCI/Xr",
-	"PCI/Xrj",
-};
-
-#define STARTC      021
-#define STOPC       023
-#define IAIXON      0x2000
-
-
-#define TXSTOPPED  0x1
-#define LOWWAIT    0x2
-#define EMPTYWAIT  0x4
-#define RXSTOPPED  0x8
-#define TXBUSY     0x10
-
-#define DISABLED   0
-#define ENABLED    1
-#define OFF        0
-#define ON         1
-
-#define FEPTIMEOUT 200000  
-#define SERIAL_TYPE_INFO    3
-#define EPCA_EVENT_HANGUP   1
-#define EPCA_MAGIC          0x5c6df104L
-
-struct channel 
-{
-	long   magic;
-	struct tty_port port;
-	unsigned char boardnum;
-	unsigned char channelnum;
-	unsigned char omodem;         /* FEP output modem status     */
-	unsigned char imodem;         /* FEP input modem status      */
-	unsigned char modemfake;      /* Modem values to be forced   */
-	unsigned char modem;          /* Force values                */
-	unsigned char hflow;
-	unsigned char dsr;
-	unsigned char dcd;
-	unsigned char m_rts ; 		/* The bits used in whatever FEP */
-	unsigned char m_dcd ;		/* is indiginous to this board to */
-	unsigned char m_dsr ;		/* represent each of the physical */
-	unsigned char m_cts ;		/* handshake lines */
-	unsigned char m_ri ;
-	unsigned char m_dtr ;
-	unsigned char stopc;
-	unsigned char startc;
-	unsigned char stopca;
-	unsigned char startca;
-	unsigned char fepstopc;
-	unsigned char fepstartc;
-	unsigned char fepstopca;
-	unsigned char fepstartca;
-	unsigned char txwin;
-	unsigned char rxwin;
-	unsigned short fepiflag;
-	unsigned short fepcflag;
-	unsigned short fepoflag;
-	unsigned short txbufhead;
-	unsigned short txbufsize;
-	unsigned short rxbufhead;
-	unsigned short rxbufsize;
-	int    close_delay;
-	unsigned long  event;
-	uint   dev;
-	unsigned long  statusflags;
-	unsigned long  c_iflag;
-	unsigned long  c_cflag;
-	unsigned long  c_lflag;
-	unsigned long  c_oflag;
-	unsigned char __iomem *txptr;
-	unsigned char __iomem *rxptr;
-	struct board_info           *board;
-	struct board_chan	    __iomem *brdchan;
-	struct digi_struct          digiext;
-	struct work_struct          tqueue;
-	struct global_data 	    __iomem *mailbox;
-};
-
-struct board_info	
-{
-	unsigned char status;
-	unsigned char type;
-	unsigned char altpin;
-	unsigned short numports;
-	unsigned long port;
-	unsigned long membase;
-	void __iomem *re_map_port;
-	void __iomem *re_map_membase;
-	unsigned long  memory_seg;
-	void ( * memwinon )	(struct board_info *, unsigned int) ;
-	void ( * memwinoff ) 	(struct board_info *, unsigned int) ;
-	void ( * globalwinon )	(struct channel *) ;
-	void ( * txwinon ) 	(struct channel *) ;
-	void ( * rxwinon )	(struct channel *) ;
-	void ( * memoff )	(struct channel *) ;
-	void ( * assertgwinon )	(struct channel *) ;
-	void ( * assertmemoff )	(struct channel *) ;
-	unsigned char poller_inhibited ;
-};
-

drivers/staging/tty/epcaconfig.h

-#define NUMCARDS 0
-#define NBDEVS 0
-
-struct board_info static_boards[NUMCARDS]={
-};
-
-/* DO NOT HAND EDIT THIS FILE! */

drivers/staging/tty/ip2/Makefile

-#
-# Makefile for the Computone IntelliPort Plus Driver
-#
-
-obj-$(CONFIG_COMPUTONE)         += ip2.o
-
-ip2-y			:= ip2main.o
-

drivers/staging/tty/ip2/ip2.h

-/*******************************************************************************
-*
-*   (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort II family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Driver constants for configuration and tuning
-*
-*   NOTES:
-*
-*******************************************************************************/
-#ifndef IP2_H
-#define IP2_H
-
-#include "ip2types.h"
-#include "i2cmd.h"
-
-/*************/
-/* Constants */
-/*************/
-
-/* Device major numbers - since version 2.0.26. */
-#define IP2_TTY_MAJOR      71
-#define IP2_CALLOUT_MAJOR  72
-#define IP2_IPL_MAJOR      73
-
-/* Board configuration array.
- * This array defines the hardware irq and address for up to IP2_MAX_BOARDS
- * (4 supported per ip2_types.h) ISA board addresses and irqs MUST be specified,
- * PCI and EISA boards are probed for and automagicly configed
- * iff the addresses are set to 1 and 2 respectivily.
- *    0x0100 - 0x03f0 == ISA
- *	         1        == PCI
- *	         2        == EISA
- *	         0        == (skip this board)
- * This array defines the hardware addresses for them. Special 
- * addresses are EISA and PCI which go sniffing for boards. 
-
- * In a multiboard system the position in the array determines which port
- * devices are assigned to each board: 
- *		board 0 is assigned ttyF0.. to ttyF63, 
- *		board 1 is assigned ttyF64  to ttyF127,
- *		board 2 is assigned ttyF128 to ttyF191,
- *		board 3 is assigned ttyF192 to ttyF255. 
- *
- * In PCI and EISA bus systems each range is mapped to card in 
- * monotonically increasing slot number order, ISA position is as specified
- * here.
-
- * If the irqs are ALL set to 0,0,0,0 all boards operate in 
- * polled mode. For interrupt operation ISA boards require that the IRQ be 
- * specified, while PCI and EISA boards any nonzero entry 
- * will enable interrupts using the BIOS configured irq for the board. 
- * An invalid irq entry will default to polled mode for that card and print
- * console warning.
- 
- * When the driver is loaded as a module these setting can be overridden on the 
- * modprobe command line or on an option line in /etc/modprobe.conf.
- * If the driver is built-in the configuration must be 
- * set here for ISA cards and address set to 1 and 2 for PCI and EISA.
- *
- * Here is an example that shows most if not all possibe combinations:
-
- *static ip2config_t ip2config =
- *{
- *	{11,1,0,0},		// irqs
- *	{				// Addresses
- *		0x0308,		// Board 0, ttyF0   - ttyF63// ISA card at io=0x308, irq=11
- *		0x0001,		// Board 1, ttyF64  - ttyF127//PCI card configured by BIOS
- *		0x0000,		// Board 2, ttyF128 - ttyF191// Slot skipped
- *		0x0002		// Board 3, ttyF192 - ttyF255//EISA card configured by BIOS
- *												 // but polled not irq driven
- *	}
- *};
- */
-
- /* this structure is zeroed out because the suggested method is to configure
-  * the driver as a module, set up the parameters with an options line in
-  * /etc/modprobe.conf and load with modprobe or kmod, the kernel
-  * module loader
-  */
-
- /* This structure is NOW always initialized when the driver is initialized.
-  * Compiled in defaults MUST be added to the io and irq arrays in
-  * ip2.c.  Those values are configurable from insmod parameters in the
-  * case of modules or from command line parameters (ip2=io,irq) when
-  * compiled in.
-  */
-
-static ip2config_t ip2config =
-{
-	{0,0,0,0},		// irqs
-	{				// Addresses
-	/* Do NOT set compile time defaults HERE!  Use the arrays in
-		ip2.c!  These WILL be overwritten!  =mhw= */
-		0x0000,		// Board 0, ttyF0   - ttyF63
-		0x0000,		// Board 1, ttyF64  - ttyF127
-		0x0000,		// Board 2, ttyF128 - ttyF191
-		0x0000		// Board 3, ttyF192 - ttyF255
-	}
-};
-
-#endif

drivers/staging/tty/ip2/ip2ioctl.h

-/*******************************************************************************
-*
-*   (c) 1998 by Computone Corporation
-*
-********************************************************************************
-*
-*
-*   PACKAGE:     Linux tty Device Driver for IntelliPort II family of multiport
-*                serial I/O controllers.
-*
-*   DESCRIPTION: Driver constants for configuration and tuning
-*
-*   NOTES:
-*
-*******************************************************************************/
-
-#ifndef IP2IOCTL_H
-#define IP2IOCTL_H
-
-//*************
-//* Constants *
-//*************
-
-// High baud rates (if not defined elsewhere.
-#ifndef B153600   
-#	define B153600   0010005
-#endif
-#ifndef B307200   
-#	define B307200   0010006
-#endif
-#ifndef B921600   
-#	define B921600   0010007
-#endif
-
-#endif

drivers/staging/tty/ip2/ip2trace.h

-
-//
-union ip2breadcrumb 
-{
-	struct { 
-		unsigned char port, cat, codes, label;
-	} __attribute__ ((packed)) hdr;
-	unsigned long value;
-};
-
-#define ITRC_NO_PORT 	0xFF
-#define CHANN	(pCh->port_index)
-
-#define	ITRC_ERROR	'!'
-#define	ITRC_INIT 	'A'
-#define	ITRC_OPEN	'B'
-#define	ITRC_CLOSE	'C'
-#define	ITRC_DRAIN	'D'
-#define	ITRC_IOCTL	'E'
-#define	ITRC_FLUSH	'F'
-#define	ITRC_STATUS	'G'
-#define	ITRC_HANGUP	'H'
-#define	ITRC_INTR 	'I'
-#define	ITRC_SFLOW	'J'
-#define	ITRC_SBCMD	'K'
-#define	ITRC_SICMD	'L'
-#define	ITRC_MODEM	'M'
-#define	ITRC_INPUT	'N'
-#define	ITRC_OUTPUT	'O'
-#define	ITRC_PUTC	'P'
-#define	ITRC_QUEUE	'Q'
-#define	ITRC_STFLW	'R'
-#define	ITRC_SFIFO	'S'
-#define	ITRC_VERIFY	'V'
-#define	ITRC_WRITE	'W'
-
-#define	ITRC_ENTER	0x00
-#define	ITRC_RETURN	0xFF
-
-#define	ITRC_QUEUE_ROOM	2
-#define	ITRC_QUEUE_CMD	6
-