media: i2c: isl7998x: Add driver for Intersil ISL7998x

Add driver for the Intersil ISL7998x Analog to MIPI CSI-2/BT656 decoder.
This chip supports 1/2/4 analog video inputs and converts them into
1/2/4 VCs in MIPI CSI2 stream.

This driver currently supports ISL79987 and both 720x480 and 720x576
resolutions, however as per specification, all inputs must use the
same resolution and standard. The only supported pixel format is now
YUYV/YUV422. The chip should support RGB565 on the CSI2 as well, but
this is currently unsupported.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
To: linux-media@vger.kernel.org
Signed-off-by: Michael Tretter <m.tretter@pengutronix.de>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[Sakari Ailus: Always call pm_runtime_get_and_resume in pre_streamon]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>

MAINTAINERS

@@ -10006,6 +10006,14 @@ L:	linux-iio@vger.kernel.org
 F:	Documentation/devicetree/bindings/counter/interrupt-counter.yaml
 F:	drivers/counter/interrupt-cnt.c
 
+INTERSIL ISL7998X VIDEO DECODER DRIVER
+M:	Michael Tretter <m.tretter@pengutronix.de>
+R:	Pengutronix Kernel Team <kernel@pengutronix.de>
+L:	linux-media@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/media/i2c/isil,isl79987.yaml
+F:	drivers/media/i2c/isl7998x.c
+
 INVENSENSE ICM-426xx IMU DRIVER
 M:	Jean-Baptiste Maneyrol <jmaneyrol@invensense.com>
 L:	linux-iio@vger.kernel.org

drivers/media/i2c/Kconfig

@@ -325,6 +325,16 @@ config VIDEO_BT866
 	  To compile this driver as a module, choose M here: the
 	  module will be called bt866.
 
+config VIDEO_ISL7998X
+	tristate "Intersil ISL7998x video decoder"
+	depends on VIDEO_V4L2 && I2C
+	depends on OF_GPIO
+	select MEDIA_CONTROLLER
+	select VIDEO_V4L2_SUBDEV_API
+	help
+	  Support for Intersil ISL7998x analog to MIPI-CSI2 or
+	  BT.656 decoder.
+
 config VIDEO_KS0127
 	tristate "KS0127 video decoder"
 	depends on VIDEO_V4L2 && I2C

drivers/media/i2c/Makefile

@@ -134,6 +134,7 @@ obj-$(CONFIG_VIDEO_IMX334)	+= imx334.o
 obj-$(CONFIG_VIDEO_IMX335)	+= imx335.o
 obj-$(CONFIG_VIDEO_IMX355)	+= imx355.o
 obj-$(CONFIG_VIDEO_IMX412)	+= imx412.o
+obj-$(CONFIG_VIDEO_ISL7998X)	+= isl7998x.o
 obj-$(CONFIG_VIDEO_MAX9286)	+= max9286.o
 obj-$(CONFIG_VIDEO_MAX9271_LIB)	+= max9271.o
 obj-$(CONFIG_VIDEO_RDACM20)	+= rdacm20.o

include/uapi/linux/v4l2-controls.h

@@ -219,6 +219,12 @@ enum v4l2_colorfx {
  */
 #define V4L2_CID_USER_ALLEGRO_BASE		(V4L2_CID_USER_BASE + 0x1170)
 
+/*
+ * The base for the isl7998x driver controls.
+ * We reserve 16 controls for this driver.
+ */
+#define V4L2_CID_USER_ISL7998X_BASE		(V4L2_CID_USER_BASE + 0x1180)
+
 /* MPEG-class control IDs */
 /* The MPEG controls are applicable to all codec controls
  * and the 'MPEG' part of the define is historical */